LS2660-7R

S Series 100 Watt AC-DC Converters Input voltage range from 85…264 V AC 1 or 2 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage LGA • Rugged electrical and mechanical design • Wide input frequency range from 47...440 Hz • Operating ambient temperature range –40...71 °C with convection cooling Selection chart Output 1 Output 2 Input voltage Type Options Uo nom [V DC] 5.1 12 15 24 24 30 48 12 15 24 Io nom [A] 16 8 6.5 4.2 4 3.2 2 4 3.2 2 Uo nom [V DC] 12 15 24 Io nom [A] 4 3.2 2 Ui [V AC] 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 LS 1001-7R LS 1301-7R LS 1501-7R LS 1601-7R LS 2320-7R LS 2540-7R LS 2660-7R LS 2320-7R LS 2540-7R LS 2660-7R -9, E, D, V, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 -9, E, D, P, T, B1 www.power-one.com Edition 4/04.2001 1 Cassette Style Input Input voltage AC Input frequency Input voltage DC Inrush current limitation wide input range S Series 85...264 V AC 47...440 Hz 88...372 V DC by thermistor Output Efficiency Output voltage setting accuracy Output voltage switching noise Line regulation Load regulation Minimum load Current limitation Operation in parallel Hold-up time Ui nom, Io nom Ui nom, Io nom up to 85% ±0.6% Uo nom IEC/EN 61204, total typ. 90 mVpp Ui min...Ui max, Io nom typ. ±0.3% Uo nom Ui nom, 10...100% Io nom, symmetrical output load typ. 0.5% Uo nom not required 0A rectangular U/I characteristic typ. 110% Io nom by current limitation Ui nom, Io nom 80 ms Control and protection Input fuse Input undervoltage lockout Input overvoltage lockout Input transient protection Output Output overvoltage Overtemperature Output voltage adjustment Inhibit Status indication not user accessible 4 AT typ. 90% Ui min typ. 109% Ui max varistor no-load, overload and short circuit proof suppressor diode in each output switch-off with auto restart TTL input, output(s) disabled if open circuit LEDs: OK, inhibit, overload typ. 130% Uo nom TC typ. 100 °C 0...110% Uo nom Safety Approvals Class of equipment Protection degree Electric strength test voltage EN 60950, UL 1950, CSA 22.2 No. 950 class I IP 30 2 kV AC 4 kV AC 1 kV AC 0.1 kV AC I/case I/O O/case O/O EMC Electrostatic discharge Electromagnetic field Electr. fast transients/bursts Surge Conducted disturbances Electromagnetic emissions IEC/EN 61000-4-2, level 4 (8/15 kV) IEC/EN 61000-4-3, level x (20 V/m) IEC/EN 61000-4-4, level 4 (2/4 kV) IEC/EN 61000-4-5, level 3 (2 kV) IEC/EN 61000-4-6, level 3 (10 V) CISPR 22/EN 55022 criterion A criterion A criterion A criterion A criterion A class B www.power-one.com Edition 4/04.2001 2 S Series Environmental Operating ambient temperature Operating case temperature TC Storage temperature Damp heat Vibration, sinusoidal Shock Bump Random vibration MTBF 100 Watt AC-DC Converters Ui nom, Io nom, convection cooled Ui nom, Io nom non operational IEC/EN 60068-2-3, 93%, 40 °C IEC/EN 60068-2-6, 10...60/60...2000 Hz IEC/EN 60068-2-27, 6 ms IEC/EN 60068-2-29, 6 ms IEC/EN 60068-2-64, 20...500 Hz MIL-HDBK-217F, GB, 40 °C –25...71 °C –25...95 °C –40...100 °C 56 days 0.35 mm/5 gn 100 gn 40 gn 4.9 gn rms 500'000 h Options Extended temperature range –40...71 °C, ambient, operating Electronic inrush current limitation Output voltage adjustment 40...110% Uo nom, excludes feature R and vice versa Input and/or output undervoltage monitoring, excludes option V Input and/or output undervoltage monitoring (VME), excludes option D Current sharing Cooling plate -9 E P D0…D9 V0, V2, V3 T B1 Pin allocation Pin 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Vo1+ Vo1+ Vo1– Vo1– S+ S– R i D V T N N P P LS 4000 Output 1 Output 1 Sense Sense Control of Uo1 Inhibit Save data ACFAIL Current sharing Protective earth Neutral Phase Vo2+ Vo2+ Vo2– Vo2– Vo1+ Vo1– R i D T N N P P LS 5000 Output 2 Output 2 Output 1 Control of Uo1 Inhibit Save data Current sharing Protective earth Neutral Phase S10002 30 26 22 18 14 10 6 32 28 24 20 16 12 8 4 www.power-one.com Edition 4/04.2001 3 Cassette Style Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 171.93 (DIN 41494) (6.77") M4 Measuring point of case temperature TC 7 TE 5 TE S Series European Projection 111 (3U) 4.37") 100 (3.93") Test jacks Option P (Uo) Option D (Uto) Option D (Uti) LED i LED OK LED IoL 152 (5.98") 11.8 (0.46") 60 (2.36") 168.5 (6.63") 09004 Accessories Front panels 19" (Schroff/Intermas) Mating H15 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Chassis or wall mounting plates for frontal access Universal mounting brackets for chassis or DIN-rail mounting 25.9 (1.02") www.power-one.com Edition 4/04.2001 4