PS-LD0301-038S

LED-CONVERTER UNIT PS-LD0301-038(S) DESCRIPTION : This low profile LED-Converter is developed for max. 3 LED-lines Optimized for Optrex: T55465D065J-LW-A-AAN Optimized for Mitsubishi: AA065VD01 APPLICABLE: 1~3 LED lines (Serial Mode) Pout max. 7W LED Voltage max. 25Vdc Lamp Current max. 90mAdc FEATURES : Internal open LED detection for every line Voltage or ext. PWM dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide input voltage range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity (PRELIMINARY INFORMATION) -20°C ~ +70°C -20°C ~ +85°C 95 %RH max DIMENSIONS : LxWxH 64 x 32 x 6.5 mm Weight :8 (g) typ. Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN3 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 / PBD 53261-0690 / PBD Note t=1.0mm Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 27th November 2009 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0301-038(S) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 Symbols Ratings Vin 4.75 ~ 13.2 Vdc Vin 4.75 ~ 13.2 Vdc Vrmt 0 ~ 1.5 = OFF / 2.5 ~ Vin = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightness) GND GND GND Output side CN3: Pin No. CN 3-1 CN 3-2 CN 3-3 CN 3-4 CN 3-5 CN 3-6 Symbols RTN1(-) RTN2(-) N.C. N.C Vhigh(+) Vhigh(+) Ratings LED LINE 1 RETURN LED LINE 2 RETURN (PRELIMINARY INFORMATION) 25Vdc (90mArms) 25Vdc (90mArms) ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Open Load Shutdown PWM Frequency Output Power Output Power Output Power Output Power Symbols Vin (V) Vbr (V) Tu (°C) 0 5 0 0 0 0 0 0 0 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 Specification Min. TBD TBD 150 TBD TBD TBD TBD Typ. 90 10 1.0 25 TBD TBD TBD TBD Max. TBD TBD 300 TBD TBD TBD TBD Unit mAdc % Adc Vdc Hz Watt Watt Watt Watt Note Dut y 100% max current , dut y cycle *By 12Vdc Iout 4.75 ~ 13.2 Imin 4.75 ~ 13.2 Iin 4.75 ~ 13.2 Vbias 4.75 ~ 13.2 f(PWM) 4.75 ~ 13.2 Pout 4.75 ~ 13.2 Pout 4.75 ~ 13.2 Pout 4.75 ~ 13.2 Pout 4.75 ~ 13.2 Tu: -20~+50degC Tu: -20~+70degC For one line For one line Note 1 : Note 2 : Note 3 : Do not use analog dimming function and external PWM for dimming at the same time. Pin terminal style converters have Molex connectors mounted. External PWM-signal is Low active. Vin 4. 75 ~ 13.2 Vdc A Iin V CN1-2 Vrmt 1. 5 / 2. 5 Vdc V CN1-1 CN3-6 CN3-5 D1 D1 TEST CIRCUIT : a b SW1 CN1-3 CN3-4 N.C. D2 D2 Ext. PWM 0. 0 ~ Vin CN1-4 SW2 Dx Dx c Connect Vbr to Ground while using ext. PWM dimming. Vbr 0. 0 ~ 5. 0 Vdc CN1-5 SW3 CN1-6 CN1-7 CN1-8 CN3-3 CN3-2 CN3-1 N.C. CABLES : For input: For output: 500 mm, stripped and tinned ends, order key < input cable # 13> For Optrex panel and Mitsubishi panel in the top: matching connectors, 200 mm, order key Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 27th November 2009 All specifications are subject to change without notice.