PS-M05D05S

DC-AC INVERTER UNIT PS-M05D05(S) (5 W DUAL OUTPUTS) DESCRIPTION : This DC/AC Inverter is developed for alternative Backlight Inverter to Endicot ESerie. The Inverter has PCB mounting pins. The nominal input voltage is 5.0 Vdc regulated. Please contact us for confirmation regarding compatibility with your display. APPLICABLE LCD: Lamp Voltage 500 Vrms Lamp Current 2 x 5.0 mArms Lamp Start Up Voltage 1.500 Vrms (Vin : 5.0 Vdc) FEATURES : min. 75% Efficiency Input Voltage, must be regulated Ext. PWM (TTL) Dimming Function 250 Hz RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxBxH (STANDARD) -10°C ~ +60°C -20°C ~ +85°C 95 %RH max 32 x 40 x 15 mm 17.7 8 7.62 Bottom View PCB mounting pins 0.64 square. Unit : mm Weight :12 (g) typ 39.70 7.62 6.10 2 6 27.94 1 32.0 3 15.24 5.60 10.16 5 4 20.23 Pin Terminal: Pin No. 1 2 3 4 5 6 Symbols Vin GND Vlow Vhigh1 Vhigh2 Ext. PWM Ratings 4.75 ~ 5.25 Vdc (GND) 500 Vrm s (5.0 m Arm s ) 500 Vrm s (5.0 m Arm s ) High Activ (250 Hz) Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.3 , 12th February 2010 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-M05D05(S) (5 W DUAL OUTPUTS) ELECTRICAL CHARACTERISTICS : Conditions Ext. Tu (°C) PW M (%) 100 -10 ~ +60 10 -10 ~ +60 100 -10 ~ +60 100 -10 ~ +60 100 -10 ~ +60 Specification Min. 4.0 27 Typ. 5.0 10 0.4 32 1.500 Max. 6.0 37 Unit m Arm s % Adc kHz Vrm s Note (STANDARD) Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage Symbols Iout Iout Iin F Vopen Vin (V) 5±0.25 5±0.12 5±0.25 5±0.25 5±0.25 Note 1 : Note 2: Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. The external PWM frequency should be in a range of 100 ~ 500 Hz. For other frequency please request. The optimum is normally at 250 Hz, and minimizes the interference disturbances of the vertical sync. frequency. TEST CIRCUIT : F Iin V F 1000:1 PROBE Vopen Pin 1 Pin 5 Vin 4.75 ~ 5.25 V A V ~ Pin 2 T1 Pin 4 RL2 CL2 RL1 CL1 A ~ Iout2 Iout1 A ~ Pin 6 Ext. PWM* 0/5V Pin 3 *) Only active when Vrmt is 0 Vdc or floating Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.3 , 12th February 2010 All specifications are subject to change without notice.