PSBZ36

ECO-PACTM 1 Single Phase Half Controlled PSBZ 36 IdAV = 36 A Rectifier Bridge Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Type VRRM = 600-1600 V PSBZ PSBZ PSBZ PSBZ PSBZ 36/06 36/08 36/12 36/14 36/16 Symbol I*dAV ITRMS ITAVM ITSM Test Conditions TC = 85 °C, TVJ = TVJM TC = 85 °C, TVJ = 45 °C VR = 0 TVJ = TVJM VR = 0 TVJ = 45 °C VR = 0 TVJ = TVJM VR = 0 (per module) Maximum Ratings 36 31 40 320 350 280 310 500 520 390 400 150 A A A A A A A A²s A²s A²s A²s A/µs Features 180° sine, per thyristor t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine repetitive, IT = 50 A • • • • • • Package with DCB ceramic base plate Isolation voltage 3600 V∼ Planar glass passivated chips Low forward voltage drop ∫ i2 dt Leads suitable for PC board soldering UL registered, E 148688 Applications (di/dt)cr TVJ = TVJM VD=2/3VDRM IG=0.15 A f=50Hz, tP=200µs non repetitive, IT =1/2 . IdAV VD=2/3VDRM tP=30µs tP=500µs tP= 10ms ≤ ≤ ≤ 500 1000 10 5 1 0.5 10 -40... + 125 125 -40... + 125 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Md Mounting torque typ. t=1s (M4) 2500 3000 1.5 - 1.8 14 - 16 16 A/µs V/µs W W W W V °C °C °C V∼ V∼ Nm lb.in. g • • • • Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors diG/dt=0.15 A/µs Advantages (dv/dt)cr PGM TVJ = TVJM TVJ = TVJM IT = ITAVM RGK= ∞, method 1 (linear voltage rise) • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight PGAVM VRGM TVJ TVJM Tstg VISOL Weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated *for resistive load at bridge output  2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Symbol ID,IR VT VTO rT VGT IGT Test Conditions TVJ = TVJM, VR = VRRM, VD=VDRM TVJ = 25°C IT = 45 A, TVJ = 25 °C Characteristic Value ≤ ≤ ≤ 5 0.3 1.45 0.85 13 1.0 1.2 65 80 50 0.2 5 150 200 100 100 2 1.4 0.35 2.0 0.5 12.6 6.3 50 mA mA V V mΩ V V mA mA mA V mA mA mA mA mA µs K/W K/W K/W K/W mm mm m/s² For power-loss calculations only (TVJ = TVJM) VD = 6V VD = 6V TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C TVJ =125°C ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ VGD IGD IL TVJ= TVJM TVJ= TVJM VD=2/3VDRM VD=2/3VDRM TVJ = -40 °C TVJ = 125°C TG=30µs, IG=0.3A, TVJ = 25°C diG/dt=0.1A/µs IH tgd RthJC RthJK ds dA a TVJ= 25°C, VD=6V, RGK= ∞ TVJ= 25°C, VD=1/2VDRM IG = 0.3 A, diG/dt= 0.3 A/µs per thyristor; DC per module per thyristor; DC per module Creeping distance on surface Creeping distance in air Max. allowable acceleration Package style and outline Dimensions in mm (1mm = 0.0394“)  2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20