8PM-11-0009-02-131191

SPRING - LOADED CONNECTORS SPRING–LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS TEL +41 32 421 04 00 2 mm 2.54 mm 34 35, 36 35, 36 Surface mount perpendicular with positioning pins 37 37 Surface mount parallel 38 SINGLE ROW 34 SINGLE ROW DOUBLE ROW 1.25 mm SINGLE ROW GRID SALES@PRECIDIP.COM SLC CONNECTORS SEE PAGE Straight solder tail 32 Right angle solder tail 32 Surface mount perpendicular DOUBLE ROW WWW.PRECIDIP.COM 33 33 SIM card socket 38 PAD CONNECTORS Surface mount perpendicular 39 Surface mount parallel 39 30 39 Due to technical progress, all information provided is subject to change without prior notice. SPRING-LOADED CONNECTORS PAD CONNECTORS TEL +41 32 421 04 00 GENERAL SPECIFICATIONS SALES@PRECIDIP.COM The values listed below are general specs applying for PRECI-DIP spring-loaded connectors. Please see individual catalog page for additional and product specific technical data. OPERATING TEMPERATURE RANGE CLIMATIC CATEGORY (IEC) OPERATING HUMIDIT Y RANGE MA X. WORKING VOLTAGE -55 ... +125 °C (-55 °… +85 °C with music wire spring) 55/85/21 Annual mean 75% 100 VRMS /150 VDC (2.54 mm grid) PRECI-DIP connectors designated « Series Preci-Dip Connector » are recognized by UL LLC and listed under « Connectors for Use in Data, Signal, Control and Power Applications », File Nr. E174442. PACKAGING MECHANICAL CHARACTERISTICS MIN. INITIAL HEIGHT STROKE/HEIGHT RATIO MA X STROKE MIN. INITIAL SPRING FORCE BASIC LOW RESISTANCE LOW RESISTANCE HOLLOW PISTON T YPE SHAPED PISTON T YPE CLIP IN-LINE DESIGN T YPE 3 mm Max. 0.3 2 mm 0.2 N 6 mm Max. 0.2 2 mm 0.2 N 10 mm Max. 0.15 1.5 mm 0.2 N • Standard connector packaging is card box. • SMD mount connectors available on request with Tape & Reel packaging acc. to EIA Standard 481. These products are marked with the symbol: T & R Packaging ELECTRICAL CHARACTERISTICS INSUL ATION RESISTANCE BETWEEN ANY TWO ADJACENT CONTACTS CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS Min. 10’000 M: at 500 VAC Max. 1 pF Please consult www.precidip.com for availability, size of tape, size of reel, number of components per reel, packing units and part numbers. ENVIRONMENTAL CHARACTERISTICS The sockets withstand the following environmental tests without mechanical and electrical defects: • Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h • Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH, 1 cycle of 24 h • Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h • Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min • Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis • Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis During the above two tests, no contact interruption >50 ns does appear. • Solderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7 • Resistance to soldering heat J-STD-020C, 260 °C, 20 s • Moisture sensitivity J-STD-020C level 1 Due to technical progress, all information provided is subject to change without prior notice. 31 SPRING–LOADED CONNECTORS WWW.PRECIDIP.COM SPRING-LOADED CONNECTORS 1.25 mm GRID / SINGLE ROW / SOLDER TAIL WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM Fine pitch connectors with spring-loaded contacts (SLC), solder tail. High-rel contacts with clip, patented in-line design. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) INSUL ATOR FL AMMABILIT Y PISTON AND BARREL CONTACT CLIP SPRING MA X. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT CONTACT RESISTANCE Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) Beryllium copper (C17200) Stainless steel X12 CrNi177, DIN 17224 1.4 mm 0.2 N initial 0.36 N at 1/2 stroke 40'000 cycles Max. 2 A 20 m: (static measurement, halfway position) ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE PIN PISTON 28 Tin 0.3 μm min. gold See page 178 for plating specs. Surface mount miniature SLC connectors available on request. Please consult. 8PD-28-0014-01-812 Straight SLC connector, solder tail, single row Standard number of contacts: 14 Please consult for other pin number or partially equipped connectors 8PC-28-0014-01-828 Right angle SLC connector, solder tail, single row Standard number of contacts: 14 Please consult for other pin number or partially equipped connectors 32 Due to technical progress, all information provided is subject to change without prior notice. SPRING-LOADED CONNECTORS 2 mm GRID / SINGLE ROW / DOUBLE ROW /SURFACE MOUNT TEL +41 32 421 04 00 SALES@PRECIDIP.COM SPRING–LOADED CONNECTORS WWW.PRECIDIP.COM Basic modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with shaped piston design for low profile. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) CONTACT RESISTANCE Black glass filled polyester LCP-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) Stainless steel X12 CrNi177, DIN 17224 1.1 / 1.4 mm according to total height 0.25 N initial 0.7 N at 0.7 mm stroke 50'000 cycles Max. 3.5 A / 7A peak 10 m: (static measurement, halfway position) COPL ANARIT Y SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) INSUL ATOR FL AMMABILIT Y PISTON AND BARREL SPRING MA X. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE BARREL PISTON S1 0.25 μm gold 0.5 μm gold Bulk : T & R Packaging with pick & place cap* : 821-S1-NNN-30-XXX101 821-S1-NNN-30-XXX191 See page 178 for plating specs. NNN number of poles. Replace NNN with the requested number of poles, e.g. 821-SS-NNN-30-012101 for a single row version with 16 pins becomes 821-SS-016-30-012101. Surface mount SLC connector, low profile, single row AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging with pick & place cap* : 823-S1-NNN-30-XXX101 823-S1-NNN-30-XXX191 Surface mount SLC connector, low profile, double row AVAIL ABILIT Y FROM 4 to 20 contacts (standard number of contacts: 20) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. AVAILABLE CONNECTOR HEIGHTS INITIAL HEIGHT A (mm) STROKE S (mm) X X X CODE 5 5.5 6 6.5 1.1 1.1 1.4 1.4 012 013 014 015 Due to technical progress, all information provided is subject to change without prior notice. 33 SPRING-LOADED CONNECTORS 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SOLDER TAIL WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM Low resistance modular connectors with spring-loaded contacts (SLC), solder tail. Contacts with improved, shaped piston design. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) INSUL ATOR FL AMMABILIT Y PISTON AND BARREL SPRING MA X. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT CONTACT RESISTANCE Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) Music wire DIN 17223, gold plated 1.4 mm 0.25 N initial 0.85 N at 1/2 stroke 50'000 cycles Max. 3.5 A 10 m: (static measurement, halfway position) ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE BARREL PISTON S1 SS 0.25 μm gold 0.5 μm gold 0.5 μm gold 0.5 μm gold See page 178 for plating specs. NNN number of poles: Replace NNN with the requested number of poles, e.g. 813-S1-NNN-10-014101 for a double row version with 16 pins becomes 813-S1-016-10-014101. 811-S1-NNN-10-XXX101 Straight SLC connector, low profile, solder tail, single row AVAIL ABILIT Y FROM 2 to 64 contacts (standard number of contacts: 64) 813-S1-NNN-10-XXX101 Straight SLC connector, low profile, solder tail, double row AVAIL ABILIT Y FROM 4 to 72 contacts (standard number of contacts: 72) 813-SS-NNN-10-474101 Straight SLC connector, solder tail, double row AVAIL ABILIT Y FROM 4 to 64 contacts (standard number of contacts: 64) AVAILABLE CONNECTOR HEIGHTS 34 INITIAL HEIGHT A (mm) PL ASTIC BODY HEIGHT B (mm) X X X CODE 6 6.5 7 7.5 4 4 4 4 014 015 016 017 Due to technical progress, all information provided is subject to change without prior notice. SPRING-LOADED CONNECTORS 2.54 mm GRID / SINGLE ROW / DOUBLE ROW /SURFACE MOUNT TEL +41 32 421 04 00 SALES@PRECIDIP.COM SPRING–LOADED CONNECTORS WWW.PRECIDIP.COM Basic modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with hollow piston design for low profile. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) CONTACT RESISTANCE Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) Stainless steel X12 CrNi177, DIN 17224 (Music wire DIN 17223, gold plated for 811...008101) 1.4 mm (1 mm for 811-...-008101 and 1.15 mm for 811/813-...-001101) 0.25 N initial 0.6 N at 1/2 stroke 100'000 cycles Max. 3.5 A 15 m: (static measurement, halfway position) COPL ANARIT Y SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) INSUL ATOR FL AMMABILIT Y PISTON AND BARREL SPRING MA X. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE BARREL PISTON SS 0.5 μm gold 0.5 μm gold Bulk : T & R Packaging with pick & place cap* : 811-SS-NNN-30-008101 811-SS-NNN-30-008191 See page 178 for plating specs. NNN number of poles. Replace NNN with the requested number of poles, e.g. 811-SS-NNN-30-002101 for a single row version with 16 pins becomes 811-SS-016-30-002101. Surface mount SLC connector, very low profile, single row AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging with pick & place cap* : 811-SS-NNN-30-XXX101 811-SS-NNN-30-XXX191 Surface mount SLC connector, low profile, single row AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging with pick & place cap* : 813-SS-NNN-30-XXX101 811-SS-NNN-30-XXX191 Surface mount SLC connector, low profile, double row AVAIL ABILIT Y FROM 4 to 20 contacts (standard number of contacts: 20) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. AVAILABLE CONNECTOR HEIGHTS INITIAL HEIGHT A (mm) STROKE S (mm) PL ASTIC BODY HEIGHT B (mm) X X X CODE 4.5 5 5.5 6 6.5 7 7.5 1.15 1.4 1.4 1.4 1.4 1.4 1.4 2.95 2.95 2.95 4 4 4 4 001 002 003 004 005 006 007 Due to technical progress, all information provided is subject to change without prior notice. 35 SPRING-LOADED CONNECTORS 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM Low resistance modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with improved shaped piston design. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) CONTACT RESISTANCE Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) Music wire DIN 17223, gold plated 1.4 mm 0.25 N initial 0.85 N at 1/2 stroke 50'000 cycles Max. 3.5 A 10 m: (static measurement, halfway position) COPL ANARIT Y SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) INSUL ATOR FL AMMABILIT Y PISTON AND BARREL SPRING MA X. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE BARREL PISTON S1 0.25 μm gold 0.5 μm gold Bulk : T & R Packaging with pick & place cap* : 811-S1-NNN-30-XXX101 811-S1-NNN-30-XXX191 See page 178 for plating specs. NNN number of poles. Replace NNN with the requested number of poles, e.g. 813-S1-NNN-30-014101 for a double row version with 16 pins becomes 813-S1-016-30-014101. Surface mount SLC connector, low profile, single row AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging with pick & place cap* : 813-S1-NNN-30-XXX101 813-S1-NNN-30-XXX191 Surface mount SLC connector, low profile, double row AVAIL ABILIT Y FROM 4 to 20 contacts (standard number of contacts: 20) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. AVAILABLE CONNECTOR HEIGHTS 36 INITIAL HEIGHT A (mm) PL ASTIC BODY HEIGHT B (mm) X X X CODE 6 6.5 7 7.5 4 4 4 4 014 015 016 017 Due to technical progress, all information provided is subject to change without prior notice. SPRING-LOADED CONNECTORS 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT TEL +41 32 421 04 00 SALES@PRECIDIP.COM Basic modular connectors with spring-loaded contacts (SLC), surface mount with positioning pins. Contacts with hollow piston design for low profile. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) CONTACT RESISTANCE Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) Stainless steel X12 CrNi177, DIN 17224 1.4 mm (1.15 mm for 811/813-...-021101) 0.25 N initial 0.6 N at 1/2 stroke 100'000 cycles Max. 3.5 A 15 m: (static measurement, halfway position) COPL ANARIT Y SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) INSUL ATOR FL AMMABILIT Y PISTON AND BARREL SPRING MA X. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE BARREL PISTON SS 0.5 μm gold 0.5 μm gold See page 178 for plating specs. NNN number of poles. Replace NNN with the requested number of poles, e.g. 813-SS-NNN-30-021101 for a double row version with 16 pins becomes 813-SS-016-30-021101. 811-SS-NNN-30-XXX101 Surface mount SLC connector, low profile, single row, with 2 positioning pins AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) 813-SS-NNN-30-XXX101 Surface mount SLC connector, double row, with 4 positioning pins AVAIL ABILIT Y FROM 4 to 20 contacts (standard number of contacts: 20) AVAILABLE CONNECTOR HEIGHTS INITIAL HEIGHT A (mm) STROKE S (mm) PL ASTIC BODY HEIGHT B (mm) X X X CODE 4.5 5 5.5 6 6.5 7 7.5 1.15 1.4 1.4 1.4 1.4 1.4 1.4 2.95 2.95 2.95 4 4 4 4 021 022 023 024 025 026 027 Due to technical progress, all information provided is subject to change without prior notice. 37 SPRING–LOADED CONNECTORS WWW.PRECIDIP.COM SPRING-LOADED CONNECTORS 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM Connectors with spring-loaded contacts (SLC), surface mount. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) INSULATOR FLAMMABILITY PISTON AND BARREL SPRING MAX. STROKE FORCES MECHANICAL LIFE OPERATING CURRENT Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) 8PM...131 8PM...260 Music wire Stainless steel X12 DIN 17723, CrNi177, gold plated DIN 17224 1.5 mm 1.5 mm 0.2 N initial 0.25 N initial 0.9 N at 1/2 stroke 0.95 N at 1/2 stroke 8PM...219 Stainless steel X12 CrNi177, DIN 17224 1 mm 0.25 N initial 0.6 N at 1/2 stroke 50'000 cycles 100‘000 cycles 50'000 cycles CONTACT RESISTANCE Max. 3 A Max. 3 A Max. 3 A 10 m: 10 m: 15 m: (static measurement, halfway position) COPLANARITY SMD TERMINATIONS Max 0.1 mm (measured on 25 mm long connectors) Other plating on request (see page 178 for plating specs). NN number of poles. Replace NN with the requested number of poles, e.g. 8PM-11-00NN-02-131 with 5 pins becomes 8PM-11-0005-02-131. ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE BARREL PISTON 11 SS 0.25 μm gold 0.5 μm gold 0.25 μm gold 0.5 μm gold Bulk : T & R Packaging* : 8PM-11-00NN-02-260 8PM-11-00NN-02-260191 Parallel surface mount SLC connector for pick & place automatic assembly AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging* : 8PM-11-00NN-02-131 8PM-11-00NN-02-131191 Parallel surface mount SLC connector for pick & place automatic assembly AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging* : 8PM-SS-0006-02-219 8PM-SS-0006-02-219191 SLC connector for chipcards with contacting pads acc. to ISO 7816 Standard number of contacts: 6 *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. 38 Due to technical progress, all information provided is subject to change without prior notice. PAD CONNECTORS SINGLE ROW / DOUBLE ROW / SURFACE MOUNT TEL +41 32 421 04 00 SALES@PRECIDIP.COM SPRING–LOADED CONNECTORS WWW.PRECIDIP.COM Pad connectors with fixed contacts, counterparts for spring- loaded connectors. TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31) DIELECTRIC STRENGTH Black glass filled polyester PCT-GF30-FR UL 94V-O Brass CuZn36Pb3 (C36000) 1.5 mm Max. 3.5 A Min. 1'000 VRMS COPL ANARIT Y SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) INSUL ATOR FL AMMABILIT Y CONTACT CONTACTING AREA Ø OPERATING CURRENT ORDERING INFORMATION ROHS COMPLIANT PARTS PL ATING CODE TERMINATION CONTACTING AREA 10, 11 0.25 μm gold 0.25 μm gold See page 178 for plating specs. NNN / NN number of poles. Replace NNN or NN with the requested number of poles, e.g. 802-10-NNN-30-507101 for a double row version with 20 pins becomes 802-10-020-30-507101. Bulk : T & R Packaging* : 800-10-NNN-30-507101 800-10-NNN-30-507191 SMD pad connector, single row, perpendicular mount AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging* : 802-10-NNN-30-507101 802-10-NNN-30-507191 SMD pad connector, double row, perpendicular mount AVAIL ABILIT Y FROM 4 to 20 contacts (standard number of contacts: 20) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Bulk : T & R Packaging* : 8MM-11-00NN-02-131 8MM-11-00NN-02-131191 SMD pad connector, single row, parallel mount AVAIL ABILIT Y FROM 2 to 10 contacts (standard number of contacts: 10) *Please consult www.precidip.com for availability size of tape, size of reel, number of components per reel and packing units. Due to technical progress, all information provided is subject to change without prior notice. 39 www.preci-dip.com PHONE PRECI- DIP SA Rue Saint-Maurice 34 P.O.Box 341 CH-2800 Delémont / Switzerland +41 (0)32 421 04 00 FA X +41 (0)32 421 04 01 E - M A I L sales@precidip.com www.precidip.com