PIP208

05027 Only One Name Means ProTek’Tion™ PHP8.4 - PIP500 ac PoweR bus voltage suPPRessoR DescRIPtIon The PHP and PIP Series of devices are designed in accordance with DOD-STD-1399, section 300 interface standard and MIL-STD704A for shipboard systems, electrical power and alternating current. When large voltage transients endanger voltage sensitive components, this series provides reliable protection against power interruptions and shore power switch-over. This series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable tests). PHP & PIP Package FeatuRes • DOD-STD-1399, MIL-STD-704, MIL-STD-2036 & MIL-PRF-19500/507 Compliant • 7,500 & 15,000 kilowatts Peak Pulse Power per Line (tp = 10/1000µs) • Each Device 100% Tested • Available in Multiple Voltages aPPlIcatIons • Secondary AC Power Supply • Aircraft & Shipboard AC Power Bus • Heavy Duty AC Switching Power MecHanIcal cHaRacteRIstIcs • • • • • PHP: Hermetically Sealed Glass to Metal Sub-Assemblies PIP: Molded Epoxy Case Sub-Assemblies Approximate Weight: 46 grams Flammability Rating UL 94V-0 Screening Available Upon Request: H1 - Submodule Screening (Test Plans 05231 & 05232) H2 - Submodule & Module Screening (Test Plan 05233) H3 - Submodule & Module Screening with Group B & C Lot Testing (Test Plans 05234 & 05235) 05027.R7 1/11 Page 1 www.protekdevices.com 05027 Only One Name Means ProTek’Tion™ PHP8.4 - PIP500 tyPIcal DevIce cHaRacteRIstIcs MaXIMuM RatIngs @ 25°c unless otherwise specified PaRaMeteR Peak Pulse Power (tp = 10/1000µs) - See Figure 1 Operating Temperature Storage Temperature Steady State Power Dissipation @ 50°C syMbol PPP TL TSTG TA value 7.5 & 15 -55 to 150 -55 to 150 7.5 unIts kilowatts °C °C Watts electRIcal cHaRacteRIstIcs PeR lIne @ 25°c unless otherwise specified PaRt nuMbeR aveRage RMs voltage RateD stanD-oFF voltage MInIMuM bReakDown voltage (note 1) @1ma v(bR) volts 14 14 40 40 50 50 100 100 200 200 347 347 418 418 735 735 835 835 MaXIMuM claMPIng voltage (Fig. 2) @ IPPM vc volts 22 22 67 67 84 84 167 167 319 319 536 536 652 652 1138 1138 1292 1292 MaXIMuM leakage cuRRent @v wM ID µa 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 MaXIMuM Peak Pulse cuRRent MaXIMuM Peak Pulse PoweR @ 1ms P PP kIlowatts 7.5 7.5 7.5 7.5 7.5 7.5 15 15 15 15 15 15 15 15 15 15 15 15 vRMs volts PHP8.4 PIP8.4 PHP24 PIP24 PHP30 PIP30 PHP60 PIP60 PHP120* PIP120* PHP208 PIP208 PHP250* PIP250* PHP440 PIP440 PHP500* PIP500* note 8.4 8.4 24.0 24.0 30.0 30.0 60.0 60.0 120.0 120.0 208.0 208.0 250.0 250.0 440.0 440.0 500.0 500.0 vwM volts 12.0 12.0 34.0 34.0 42.5 42.5 85.0 85.0 170.0 170.0 295.0 295.0 354.0 354.0 623.0 623.0 708.0 708.0 I PPM aMPs 341 341 112 112 90 90 90 90 47 47 28 28 23 23 13.2 13.2 11.6 11.6 1. A * indicates that this series is recommended for marine applications. For military and aerospace applications, use the PHP Series, for industrial applications, use the PIP Series. 2. The following voltages have a peak pulse power rating of 7,500 Watts for an 10/1000µs waveshape (see Figure 1): 8.4V, 24V and 30V. 05027.R7 1/11 Page 2 www.protekdevices.com 05027 Only One Name Means ProTek’Tion™ PHP8.4 - PIP500 tyPIcal DevIce cHaRacteRIstIcs FIguRe 1 Peak Pulse PoweR vs Pulse tIMe 1,000 PPP - Peak Pulse Power - kilowatts 100 15kW, 10/1000µs Waveform 10 7.5kW, 10/1000µs Waveform 1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 100,000 FIguRe 2 Pulse waveFoRM tf IPP - Peak Pulse current - % of IPP 100 100 FIguRe 3 PoweR DeRatIng cuRve TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs Peak Pulse Power 10/1000µs 80 % of Rated Power Peak Value IPP td = t/(IPP/2) 50 60 40 20 e 0 0 1 -t 2 t - time - ms 3 0 0 25 50 75 100 125 150 tl - lead temperature - °c 05027.R7 1/11 Page 3 www.protekdevices.com 05027 Only One Name Means ProTek’Tion™ PHP8.4 - PIP500 Package InFoRMatIon outlIne DIMensIons DIM A B C D E F G H I J notes 11.94 8.26 3.18 DIA. 16.76 34.16 6.35 13.46 0.47 18.29 35.69 MIllIMeteRs MIn 56.38 49.02 3.43 20.32 9.27 IncHes MIn 2.22 1.93 0.135 0.800 0.325 0.365 MaX 57.91 50.03 4.17 MaX 2.28 1.87 0.165 0.125 DIA. 0.660 1.345 0.250 0.53 0.720 1.405 1. Dimensions “D”, “F” and “I” are nominal. A B C D G H E F J I oRDeRIng InFoRMatIon base PaRt nuMbeR (xx = voltage) PHPxxx PIPxxx 1. Marking on Part - logo , date code and part number. Package outline per document number 06033.R1 9/09 subMoDule scReenIng H1 H1 subMoDule & MoDule scReenIng H2 H2 subMoDule & MoDule scReenIng, gRouP b & c lot testIng H3 H2 notes 05027.R7 1/11 Page 4 www.protekdevices.com 05027 Only One Name Means ProTek’Tion™ PHP8.4 - PIP500 coMPany InFoRMatIon coMPany PRoFIle ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. contact us corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA by telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 by Fax General: 602-431-2288 by e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05027.R7 1/11 Page 5 www.protekdevices.com