USB208-LF-T7

05141 USB208 STEERING DIODE ARRAY APPLICATIONS ✔ USB Interface Ports ✔ Cellular Phones ✔ Set Top Box Interface ✔ Sensor Interface ✔ Video Interface Ports ✔ Handheld Electronics ✔ Desktop Computers ✔ Personnal Digital Assistant (PDA) IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SOT-23-6 FEATURES ✔ ✔ ✔ ✔ ✔ ✔ ESD Protection > 25 kilovolts 500 Milliwatt Continuous Power Dissipation Provides Four (4) Lines of Protection Low Leakage Current < 1.0µA Ultra Low Capacitance: 5pF per Diode RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SOT-23-6 Package Weight 16 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION I/O 1 1 2 3 6 5 4 I/O 4 REF 1 REF 2 I/O 2 I/O 3 05141.R9 2/07 1 www.protekdevices.com USB208 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature Continuous Power Dissipation Repetitive Peak Forward Current @ tp= 5µs, F=50kHz (Pin 2-3) SYMBOL TA TSTG PPC IFRM VALUE -55 to 150 -55 to 150 500 700 UNITS °C °C mW mA ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE REPETITIVE PEAK REVERSE VOLTAGE @10µA VRRM VOLTS USB208 PSB 20 @ 25°C Unless Otherwise Specified TYPICAL FORWARD VOLTAGE MAXIMUM CAPACITANCE (See Note 1) MAXIMUM REVERSE LEAKAGE CURRENT (PER DIODE) VRRM @ 5V IR µA 1 @ 50mA VF VOLTS 1.2 CJ pF 5 Note 1: Apply a 5V bias between pins 2 (REF 1) to pin 5 (REF 2). Measure Cj between any I/O pins to pin 5 (REF 2) and divide by two. 10 IF - Forward Current - A FIGURE 1 PEAK FORWARD CURRENT VS FORWARD VOLTAGE IF - Forward Current - mA 110 90 70 50 30 10 800 FIGURE 2 LOW FORWARD CURRENT VS FORWARD VOLTAGE 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 VF - Forward Voltage - V 840 880 920 960 1000 VF - Forward Voltage - mV 05141.R9 2/07 2 www.protekdevices.com USB208 SOT-23-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D E SOT-23-6 6 5 4 K 0° - 8° PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.09 2.60 0.20 TYP 0.35 3.05 1.75 1.30 0.50 1.05 2.10 1.45 0.20 3.00 0.20 TYP 0.55 3 2 1 L J B M INCHES MIN MAX 0.110 0.059 0.036 0.014 0.033 0.067 0.036 0.003 0.102 0.007 TYP 0.014 0.120 0.070 0.051 0.020 0.040 0.083 0.057 0.008 0.118 0.007 TYP 0.022 F A G C A B C D E F G J K L M NOTES MOUNTING PAD TYPICAL DIM Millimeters Inches 1 2 3 4 5 0.70 1.90 0.95 2.40 1.00 0.028 0.074 0.037 0.094 0.039 4 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 3 2 1 5 TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., USB208-T7 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., USB208-LF-T7. Outline & Dimensions: Rev 2 - 10/05, 06013 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7”) Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05141.R9 2/07 3