Declaration of Conformity to EU RoHS Directive 2011/65/EU
Pulse Electronics manufactures products at Pulse Operations or with selected
Manufacturing Partners
Pulse Electronics
15255 Innovation Drive #100
San Diego, CA 92128
Tel: 858-674-8100
Part number: HMU2103NL
This is to certify that the parts/products listed above meet the requirements of the RoHS Directive
2011/65/EU. The following table lists the restricted materials and their respective allowable limits:
RoHS Restricted Substance
Cadmium and its compounds*
Mercury and its compounds
Hexavalent chromium and its
compounds
Lead and its compounds **
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
Phthalate (2 - ethyl hexyl ester (DEHP)
Butyl Benzyl Phthalate (BBP)
dibutyl phthalate (DBP)
Di Iso Butyl Ortho Phthalate (DIBP)
Allowable Limit
100 ppm (0.01 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
1000 ppm (0.1 weight %)
If parts/products take advantage of any exceptions, please check which exemption(s):
1. Mercury in single capped (compact) fluorescent lamps not exceeding (per burner):
(a) For general lighting purposes < 30 Watts
(b) For general lighting purposes ≥ 30 Watts and < 50 Watts
(c) For general lighting purposes ≥ 50 Watts and < 150 Watts
(d) For general lighting purposes ≥150 Watts: 15 mg
(e) For general lighting purposes with circular or square structural shape and tube diameter ≤17
mm
(f) For special purposes: 5 mg
2a. Mercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding
(per lamp):
(1) Tri-band phosphor with normal lifetime and a tube diameter < 9 mm (e.g. T2)
(2) Tri-band phosphor with normal lifetime and a tube diameter ≥ 9 mm and ≤ 17 mm
(e.g. T5)
(3) Tri-band phosphor with normal lifetime and a tube diameter > 17 mm and ≤ 28 mm
(e.g. T8)
(4) Tri-band phosphor with normal lifetime and a tube diameter > 28 mm (e.g. T12)
(5) Tri-band phosphor with long lifetime (≥ 25,000h)
2b. Mercury in other fluorescent lamps not exceeding (per lamp):
(1) Linear halophosphate lamps with tube diameter > 28mm (e.g. T10 and T12): 10 mg
(2) Non-linear halophoshate lamps (all diameters): 15mg
(3) Non-linear tri-band phosphor lamps with tube diameter > 17 mm (e.g. T9)
(4) Lamps for other general lighting and special purposes (e.g. induction lamps)
3. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and
EEFL) for special purposes not exceeding (per lamp):
(a) Short length (≤500 mm)
(b) Medium length (> 500 mm and ≤1500 mm)
(c) Long length (> 1500 mm)
4a. Mercury in other low pressure discharge lamps (per lamp)
4b. Mercury in High Pressure Sodium (vapor) lamps for general lighting purposes not exceeding
(per burner) in lamps with improved color rendering index Ra > 60:
(I) P ≤ 155 W
(II) 155 < P ≤ 405 W
(III) P > 405 W
4c. Mercury in other High Pressure Sodium (vapor) lamps for general lighting purposes not
exceeding (per burner):
(I) P ≤ 155 W
(II) 155 < P ≤405 W
(III) P > 405 W
4d. Mercury in High Pressure Mercury (vapor) lamps (HMPV)
4e. Mercury in metal halide lamps (MH)
4f. Mercury in other discharge lamps for special purposes not specifically mentioned in Annex
5a. Lead in glass of cathode ray tubes
5b. Lead in glass of fluorescent tubes not exceeding 0.2% by weight
6a. Lead as an alloying element in steel for machining purposes and in galvanized steel
containing up to 0.35% lead by weight
6b. Lead as an alloying element in aluminium containing up to 0.4% lead by weight
6c. Copper alloy containing up to 4% lead by weight
7a. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead)
7b. Lead in solders for servers, storage and storage array systems, network infrastructure
equipment for switching, signaling, transmission, and network management for telecommunications
7c-I. Electrical and electronic components containing lead in a glass or ceramic other than
dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix
compound
7c-II. Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or
higher
7c-III. Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or
250 V DC
8a. Cadmium and its compounds in one shot pellet type thermal cut-offs
8b. Cadmium and its compounds in electrical contacts
9. Hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in
absorption refrigerators up to 0.75% by weight in the cooling solution
9b. Lead in bearing shells and bushes for refrigerant-containing compressors for heating,
ventilation, air conditioning and refrigeration (HVACR) applications
11a. Lead used in C-press compliant pin connector systems
11b. Lead used in other than C-press compliant pin connector systems
12. Lead as a coating material for the thermal conduction module C-ring
13a. Lead in white glasses used for optical applications
13b. Cadmium and lead in filter glasses and glasses used for reflectance standards
14. Lead in solders consisting of more than two elements for the connection between the pins and
the package of microprocessors with a lead content of more than 80% and less than 85% by weight
15. Lead in solders to complete a viable electrical connection between semiconductor die and
carrier within integrated circuit Flip Chip packages
16. Lead in linear incandescent lamps with silicate coated tubes
17. Lead halide as radiant agent in High Intensity Discharge (HID) lamps used for professional
reprography applications
18a. Lead as activator in the fluorescent powder (1% lead by weight or less) of discharge lamps
when used as specialty lamps for diazoprinting reprography, lithography, insect traps,
photochemical and curing processes containing phosphors such as SMS ((Sr,Ba) 2MgSi2O7:Pb)
18b. Lead as activator in the fluorescent powder (1% lead by weight or less) of discharge lamps
when used as sun tanning lamps containing phosphors such as BSP (BaSi2O5:Pb)
19. Lead with PbBiSn-Hg and PbInSn-Hg in specific compositions as main amalgam and with
PbSn-Hg as auxiliary amalgam in very compact Energy Saving Lamps (ESL)
20. Lead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used
for Liquid Crystal Displays (LCDs)
21. Lead and cadmium in printing inks for the application of enamels on glasses, such as
borosilicate and soda lime glasses
23. Lead in finishes of fine pitch components other than connectors with a pitch of 0.65 mm and less
24. Lead in solders for the soldering to machined through hole discoidal and planar array
ceramic multilayer capacitors
25. Lead oxide in surface conduction electron emitter displays (SED) used in structural elements,
notably in the seal frit and frit ring
26. Lead oxide in the glass envelope of Black Light Blue lamps
27. Lead alloys as solder for transducers used in high-powered (designated to operate for several
hours at acoustic power levels of 125dB SPL and above) loudspeakers
29. Lead bound in crystal glass as defined in Annex I (Categories 1, 2, 3 and 4) of Council
Directive 69/493/EEC
30. Cadmium alloys as electrical/mechanical solder joints to electrical conductors located
directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure
levels of 100 dB (A) and more
31. Lead in soldering materials in mercury free flat fluorescent lamps (which e.g. are used for
liquid crystal displays, design or industrial lighting)
32. Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser
tubes
33. Lead in solders for the soldering of thin copper wires of 100 µm diameters and less in power
transformers
34. Lead in cermet-based trimmer potentiometer elements
36. Mercury used as a cathode sputtering inhibitor in DC plasma displays with a content up
to 30 mg per display until 1 July 2010
37. Lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body
38. Cadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium
oxide
39. Cadmium in color converting II-VI LEDs (< 10 μg Cd per mm2 of light-emitting area) for
use in solid state illumination or display systems until 1 July 2014
Signature:
Name: Kevin Zhou
Title: Manager
Date: 09/21/2017
Phone: 86-769-85538871
Email: kevinzhou@pulseelectronic.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Pulse:
HMU2103NL
很抱歉,暂时无法提供与“HMU2103NL”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+4.10230
- 100+3.94450
- 300+3.71910
- 700+3.55010