869-20/042

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C D 1. PHYSICAL DIMENSIONS DESCRIPTION 80.0 ± 1.0 65.0 ± 0.5 38.0 ± 0.5 34.0 ± 0.5 3.5 ± 0.5 1-2. CURRENT RATING A. @ 125 VAC..........................................20 A RMS MAX B. @ 250 VAC.........................................16 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 125 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 6.3X0.8 0.8~1.6 0.5 0 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 2 5 8 10 15 25 30 35 DIF. MODE dB / 0 2 2 10 15 40 35 40 26.0 ± 0.5 26.5 ± 0.5 0 FREQ. MHz R4.0MAX APPROVED DP DP LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................125/250VAC 30.0 ± 0.5 36.0 ± DATE 06-01-06 11-28-07 03-31-11 RoHS Compliancy Updated Specifications Updated Dimensions and Specifications PANEL CUTOUT 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. RoHS COMPLIANT 2. ELECTRICAL SCHEMATIC L: 0.3mH C1: 0.1uF C2: 2200pF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 869-20/042 EMI FILTER UNIT: mm REV. D 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 08-16-04 08-16-04 JJH / 08-16-04