QSB-60-01

EMI Filter Shields Material: Material Thickness: High-grade steel (spring V2a) / Material No. 1.4310 0.2mm The filter guard EMI-shield sheet is required to avoid intake of the filter into the fan should there be only one large air intake opening. It also protects against EMI/RFI transmissions if needed. The EMI filter shield can be mounted on the inside or the outside of the panel housing. A E ØD A B E hole removed (free cross-section: ca. 75%) C F B Ordering Information: Part Number QSB 40 01 Series Fan Size A Type Code A B C D E F Inch / mm Inch / mm Inch / mm Inch / mm Inch / mm Inch / mm QSB-30-01 1.260 / 32.0 0.945 / 24.0 R .082 / 2.1 .078 / 2.0 .098 / 2.5 .008 / 0.2 QSB-40-01 1.654 / 42.0 1.260 / 32.0 R .094 / 2.4 .098 / 2.5 .118 / 3.0 .008 / 0.2 QSB-50-01 2.047 / 52.0 1.575 / 40.0 R .094 / 2.4 .118 / 3.0 .138 / 3.5 .008 / 0.2 QSB-60-01 2.441 / 62.0 1.969 / 50.0 R .106 / 2.7 .138 / 3.5 .157 / 4.0 .008 / 0.2 QSB-80-01 3.228 / 82.0 2.815 / 71.5 R .126 / 3.2 .138 / 3.5 .157 / 4.0 .008 / 0.2 QSB-92-01 3.700 / 94.0 3.248 / 82.5 R .126 / 3.2 .157 / 4.0 .177 / 4.5 .008 / 0.2 QSB-119-01 4.764 / 121.0 4.133 / 105.0 R .165 / 4.2 .197 / 5.0 .217 / 5.5 .008 / 0.2 7610 Jenther Drive, Mentor, OH 44060 Phone: 1-440-951-3300, Fax: 1-440-951-7252 E-Mail: mailbox@qualtekusa.com Web: www.qualtekusa.com REV. QSB004