OCO-M20AS

OCO-M20AS Through hole OCXO Sine wave Features     Applications: CDMA, 3G, networking, instrumentation High frequency stability vs. temperature Wide operating temperature range: -40 up to +85 °C Low aging Parameter Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability Output waveform Output load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external voltage Vcontrol (Vc) via external potentiometer Reference voltage output (Vref) Phase noise @ 10 MHz carrier frequency & Vdc = 12 V Specification OCO-M20AS5 OCO-M20AS12 8.1920 ~ 20.0000 MHz 10.00, 12.80, 13.00, 16.384 & 20.00 MHz  ±3 x 10-9 over -40 ~ +85 °C  ±2 x 10-9 over -20 ~ +70 °C  ±1 x 10-9 over -10 ~ +60 °C  ±5 x 10-10 ±5 % -10  ±5 x 10 ±5 % -8  ±3 x 10 1st year < 5 x 10-12 Allan deviation per 1 s sine wave > 300 mV (rms) 50  ±10 % +5.0 V 5 % +12 V 5 % < 400 mA < 150 mA < 3 min < 2 x 10-8 @ +25 °C > ±4 x 10-7 positive slope 0 ~ +4.5 V 0 ~ +5.0 V 20 kΩ +4.5 V +5.0 V < -130 dBc/Hz @ 10 Hz < -150 dBc/Hz @ 100 Hz < -157 dBc/Hz @ 1 kHz < -159 dBc/Hz @ 10 kHz -10 ~ +60 °C, -20 ~ +70 °C, -40 ~ +70 °C or -40 ~ +85 °C -55 ~ +85 °C Operating temperature range Storage temperature range Customer specifications on request Environmental test vibration shock acceleration: 5 g; 10 Hz up to 200 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis 75 g, half-sine, 3 ms (3 shocks each, 6 directions) Pin function #1 #2 #3 #4 #5 Vdc RF output GND Vc Vref Case height H = 12.7 mm Circuit diagram CBP = 0.01 mF Zout = 50 Ω 2002/95/EC RoHS compliant QuartzCom AG sales@quartzcom.com www.quartzcom.com QuartzCom Asia sales-asia@quartzcom.com QuartzCom USA sales-usa@quartzcom.com 12 May. 10