OCO-M36ADS

OCO-M36ADS Double oven through hole OCXO Sine wave Features Applications: GPS, CDMA, 3G, 4G High frequency stability vs. temperature (up to ±2 x 10-10) Low phase noise: < -160 dBc/Hz @ 10 kHz Parameter Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability Output waveform Output load Supply voltage Peak current consumption during warm-up time Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external voltage Reference voltage output (Vref) Phase noise @ 10 MHz carrier frequency Specification 5.0000 ~ 10.0000 MHz 5.000, 8.1920 & 10.000 MHz ≤ ±5 x 10-10 over -40 ~ +70 °C ≤ ±3 x 10-10 over -20 ~ +70 °C ≤ ±2 x 10-10 over 0 ~ +55 °C ±5 % ≤ ±1 x 10-10 -10 ±5 % ≤ ±1 x 10 1st year ≤ ±2 x 10-8 -12 < 5 x 10 Allan deviation per 1 s sine wave > 400 mV (rms) 50 Ω ±5 % +12 V ±5 % < 700 mA < 150 mA < 10 min < ±5 x 10-8 @ +25 °C > ±0.4 ppm positive slope 0 ~ +5.0 V +5.0 V < -100 dBc/Hz @ 1 Hz < -130 dBc/Hz @ 10 Hz < -148 dBc/Hz @ 100 Hz < -155 dBc/Hz @ 1 kHz < -160 dBc/Hz @ 10 kHz > 30 dBc 0 ~ +55 °C, -20 ~ +70 °C or -40 ~ +70 °C -55 ~ +85 °C 19 mm Pin function #1 #2 #3 #4 #5 Vc Vref Vdc RF output GND Harmonics Operating temperature range Storage temperature range Case height /H) Circuit diagram CBP = 0.01 mF ZOUT = 50 Ω 2002/95/EC RoHS compliant QuartzCom AG sales@quartzcom.com www.quartzcom.com QuartzCom Asia sales-asia@quartzcom.com QuartzCom USA sales-usa@quartzcom.com 12 Dec. 10