OCO-M36BS5

OCO-M36BS Through hole OCXO Sine wave Features     Applications: PLL, VSAT, frequency synthesizers High frequency: up to 120 MHz Short warm-up time: < 2 min. Low phase noise – floor of < -165 dBc/Hz Parameter Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Output waveform Output Load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external voltage Reference voltage output (Vref) Phase noise Phase noise @ 100 MHz carrier frequency & for Vdc = 12 V Specification OCO-M36BS5 OCO-M36BS12 48.0000 ~ 120.0000 MHz 48.00, 56.00, 60.00, 80.00 & 100.00 MHz  ±1.0 x 10-7 over -40 ~ +70 °C -8  ±7.5 x 10 over -20 ~ +70 °C  ±5.0 x 10-8 over -10 ~ +60 °C  ±1 x 10-7 ±5 % -8  ±5 x 10 ±5 %  ±3 x 10-7 1st year Sine wave > 300 mV (rms) Sine wave > 400 mV (rms) 50 Ω ±5 % +5.0 V 5 % +12 V 5 % < 300 mA < 150 mA < 2 min < 1 x 10-7 @ +25 °C > ±3 x 10-6 positive slope 0 ~ +4 V 0 ~ +8 V +4.0 V +8.0 V < -98 dBc/Hz @ 10 Hz < -128 dBc/Hz @ 100 Hz < -150 dBc/Hz @ 1 kHz < -165 dBc/Hz @ 10 kHz Harmonics Operating temperature range Storage temperature range -10 ~ +60 °C, < -30 dBc -20 ~ +70 °C, or -40 ~ +70 °C -55 ~ +85 °C Case height Environmental test vibration shock 16.0 mm acceleration: 5 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis 100 g, half-sine, 3 ms (3 shocks each, 6 directions) Pin function #1 #2 #3 #4 #5 Vc Vref Vdc RF output GND Circuit diagram CBP = 0.01 mF Zout = 50 Ω 2002/95/EC RoHS compliant QuartzCom AG sales@quartzcom.com www.quartzcom.com QuartzCom Asia sales-asia@quartzcom.com QuartzCom USA sales-usa@quartzcom.com 12 May. 10