RH100-20.000-12-1010-EXT-TR

SURFACE MOUNT MICROPROCESSOR CRYSTAL Page 1 of 3 SERIES RH100 • • FEATURES • • • COMPACT DESIGN HIGH ACCURACY EXCELLENT FOR HIGH DENSITY SURFACE MOUNTING SPECIFICATIONS PARAMETER VALUE FREQUENCY RANGE MODE OF OSCILLATION FUNDAMENTAL THIRD OVERTONE FREQUENCY TOLERANCE AT 25°C FREQUENCY STABILITY OVER TEMPERATURE OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE AGING LOAD CAPACITANCE EQUIVALENT SERIES RESISTANCE SHUNT CAPACITANCE DRIVE LEVEL SHOCK RESISTANCE REFLOW CONDITIONS FREQUENCY (MHz) 8.000 to 9.999 10.000 to 10.999 11.000 to 11.999 12.000 to 12.999 13.000 to 15.999 16.000 to 20.999 21.000 to 29.999 30.000 to 80.000 60.000 to 156.250 ◼ TABLE 1 MODE FUND FUND FUND FUND FUND FUND FUND FUND 3OT 8.000 MHz to 156.250 MHz 8.000 MHz to 80.000 MHz 60.000 MHz to 156.250 MHz ±100 ppm max (±10 ppm, ±20 ppm and ±50 ppm available) ±100 ppm max (±10 ppm, ±20 ppm and ±50 ppm available) -20°C to +70°C Standard -40°C to +85°C Extended -40°C to +85°C ±2 ppm 1st year max 6 pF to 32 pF or Series See Table 1 3.5 pF max 300 µW max ±5 ppm max 75 cm drop test in 3 axes onto a hard wood surface 260°C ±5°C for 10s max MAXIMUM ESR (Ω) 500 250 150 100 80 70 60 50 100 PART NUMBERING SYSTEM TYPE - FREQUENCY - LOAD CAPACITANCE - RH100 - IN MHz - 6 TO 32 pF FOR PARALLEL S FOR SERIES - TOLERANCE/STABLITY (PPM/PPM) Blank FOR MAXIMUM PPMPPM Example: 1020, 2050 MODE Blank FOR < 24.576 MHz F FOR ≥ 24.576 MHz 3OT THIRD OVERTONE - OPERATING TEMPERATURE - TAPE & REEL - Blank FOR STANDARD EXT FOR EXTENDED - TR - EXAMPLE: RH100-24.000-18-TR Surface Mount Microprocessor Crystal, 3.2 x 2.5 mm, 24.000 MHz, Fundamental mode, 18 pF load, ±100 ppm Tolerance, ±100 ppm Stability, from -20°C to +70°C, Tape and reel packaging RALTRON ELECTRONICS ▪ 10400 N.W. 33rd STREET ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax: +1-305-594-3973 ▪ e-mail: sales@raltron.com ▪ web site: http://www.raltron.com SURFACE MOUNT MICROPROCESSOR CRYSTAL Page 2 of 3 SERIES RH100 • CARRIER TAPE DIMENSIONS 4.0 ± 0.1 .157 ± .004 2.8 ± 0.1 .110 ± .004 3.5 ± 0.1 .138 ± .008 2.0 ± 0.05 .079 ± .002 8.0 ± 0.2 1.75 ± 0.1 3.5 ± 0.05 ø 1.15 ø .045 0.25 ± 0.05 .010 ± .002 4.0 ± 0.1 .157 ± .004 .315 ± .008 ø 1.5 ø .059 .069 ± .004 MECHANICAL SPECIFICATION .138 ± .002 • 1.0 ± 0.1 .039 ± .004 NOTE: REFER TO EIA-481 FOR NON-SPECIFIED DIMENSIONS • PACKAGING 180 mm REEL DIAMETER 8 mm TAPE WIDTH, 4 mm PITCH QUANTITY: 3000 PIECES PER REEL Notes: • Pins 2 and 4 are connected-together and to the metal cover for Case GND. • According to ceramic base availability the Chamfer location could be on a different pin. However, the Chamfer’s location does not influence the electrical performance of the crystal. • RALTRON ELECTRONICS ▪ 10400 N.W. 33rd STREET ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax: +1-305-594-3973 ▪ e-mail: sales@raltron.com ▪ web site: http://www.raltron.com SURFACE MOUNT MICROPROCESSOR CRYSTAL Page 3 of 3 SERIES RH100 • REFLOW PROFILE tP TP Critical Zone TL to TP Ramp-up TL tL TSMAX Temp. [°C] TSMIN Ramp-down tS Preheat Time [sec] t[25°C] to Peak Reflow profile Temperature Min Preheat Temperature Max Preheat Time (TSMIN to TSMAX) Temperature Peak Temperature Ramp-up rate Ramp-down rate Time within 5°C of Peak Temperature Time t[25°C] to Peak Temperature Time • TSMIN TSMAX tS TL TP RUP RDOWN tP t[25°C] to Peak tL 150°C 200°C 60-180 sec. 217°C 260°C 3°C/sec max. 6°C/sec max. 10 sec. 480 sec. 60-150 sec. ENVIRONMENTAL PARAMETER MOISTURE SENSITIVITY LEVEL RoHS REACH SVHC HALOGEN-FREE ESD CLASSIFICATION LEVEL TERMINATION FINISH UNIT WEIGHT (GRAMS) VALUE 1 COMPLIANT COMPLIANT COMPLIANT N/A Au 0.01945 October 2021 RALTRON ELECTRONICS ▪ 10400 N.W. 33rd STREET ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax: +1-305-594-3973 ▪ e-mail: sales@raltron.com ▪ web site: http://www.raltron.com