RQRA-0060-0110

RQRA VCO SERIES Page 1 of 4 RQRA-0060-0110 ELECTRICAL SPECIFICATIONS PARAMETER CONDITION SYMBOL VALUE Min. Lower Frequency 1.2 Tuning Voltage:0.5V fo(Vt) Upper Frequency 1.2 Tuning Voltage:10.0V fo(Vt) 110 Tuning Voltage Vt 0.5 Supply Voltage Vcc 4.75 Supply Current Vcc=5.0V Tuning Sensitivity Over Tuning Range, 0.5-10.0V df/dVt Pushing Over Supply Variation df/dVcc Vcc=5.0 a(n*fo) Pulling 1.3 2nd Harmonic Typ. Max. 60 CIN Operating Temperature Range Ta Storage Temperature Range Tstor 5.0 Moisture Sensitivity Level MSL HBM Human body model JESD22A114 Termination Finish 10.0 VDC 5.25 VDC 25 mA 8 MHz/V 0.5 MHz/V 0.5 MHz pk-pk -10 dBc 330 pF -40 +85 °C -45 +90 °C 6.0 V Vcc(abs) JEDEC JSTD-2 MHz MHz df/dZl Input Capacitance Maximum Voltage UNIT 1 Glass-reinforced laminate base and nickel-silver cover ESD Sensitivity kV 3 OUTPUT CHARACTERISTICS SINE-WAVE VALUE PARAMETER SYMBOL CONDITION Sine Output Voltage Level Pw Output termination 50 Supply Current Is Vcc, ±5% Output Load OCL Min Typ. Max UNIT +5.0 +8.5 +12.0 dBm 25 mA 50 RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com Ω RQRA VCO SERIES Page 2 of 4 RQRA-0060-0110 MECHANICAL DIMENSIONS AND PIN FUNCTIONING H=0.15/3.81 ◼ Marking: RQRA 0060-0110 ◼ Date code Top View. RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com RQRA VCO SERIES Page 3 of 4 RQRA-0060-0110 PHASE NOISE VALUE PARAMETER SYMBOL SSB Phase noise (f) CONDITION Min Typ f=10kHz -114 f=100 kHz -135 Max UNIT dBc COMMON SPECIFICATIONS 1.1 -Load impedance is 50 Ohms. 1.2- The frequency range is defined between the (max) lower frequency and (min) upper frequency. 1.3 -Pulling is measured with 12dB return loss, all phases. 1.4- Package outline tolerances are typ. ±0.30mm / ±0.012inch if not stated differently on the drawing. 1.5 -It is recommended to provide two bypass-capacitors (ceramic), from Vcc to Gnd, 1nF || 100pF. 1.6- Solder temperature (peak) is 260°C for 10-20s. RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com RQRA VCO SERIES Page 4 of 4 RQRA-0060-0110 REFLOW PROFILE tP TP Critical Zone TL to TP Ramp-up TL tL TSMAX Temp. [°C] TSMIN Ramp-down tS Preheat t[25°C] to Peak Temperature Min Preheat Temperature Max Preheat Time (TSMIN to TSMAX) Temperature Peak Temperature Ramp-up rate Ramp-down rate Time within 5°C of Peak Temperature Time t[25°C] to Peak Temperature Time Time [sec] Recommended Solder Reflow Profile TSMIN TSMAX tS TL TP RUP RDOWN tP t[25°C] to Peak tL 150°C 175°C 60-180 sec. 217°C 260°C 3°C/sec max. 6°C/sec max. 10-20 sec max. 480 sec. 60-150 sec. APPROVALS Eng. approval, date: CP 06/16/2021 Created by, date: AR 06/16/2021 Revision: A RALTRON ELECTRONICS ▪ 10400 N.W. 33rd Street ▪ Miami, Florida 33172 ▪ U.S.A. Telephone: +1-305-593-6033 ▪ Fax:1+ 305-594-3973 ▪ e-mail: sales@raltron.com ▪ web: www.raltron.com