T225J-R10-KB

TUBULAR WIREWOUND RESISTORS 12 WATT to 1300 WATT RESISTORS CAPACITORS COILS DELAY LINES h ↓ T SERIES RoHS Term.W is RoHS compliant & 260°C compatible H D L I.D. ↑ Widest range in the industry! High performance for low cost Tolerances to ±0.1%, an RCD exclusive! Low inductance version available (specify opt.’X’) For improved stability & reliability, T Series is available with 24 hour burn-in (specify opt.’EQ’) Standard Series T: Tubular design enables high power at low cost. Specialty high-temp flame resistant silicone ceramic coating holds wire securely against ceramic core providing optimum heat transfer and precision performance (enabling resistance tolerances to 0.1%). .38” T12 .66” T20T225 OPTIONAL STYLES: .25” .25 -.75” typ M N .2 -.5” typ P .125” T12 .16” T20-50 .2” T50S-225 Opt. M: Assembled with Thru-Bolt Brackets Option G: Male Quick-Connect 1/4 x .031” thick [6 x .8mm] male tab Small models are mounted ≈1/4” above mounting plane, medium ≈1/2”, large ≈3/4”. Mounting kit (2 slotted brackets, insulators, threaded rod, nuts & washers) may be purchased separately, specify T50-BRACKET, T80-BRACKET, etc. 210987654321 210987654321 210987654321 Option J: Push-In Bracket (12W - 225W) Units are supplied with pre-assembled push-in slotted brackets. Brackets may be purchased separately, specify T50-PIB, T80-PIB, etc. (order 2 brackets for each resistor) .040 x 2” Option T: Tapped Single or multi-tapped units avail. Power rating is reduced by 10% per tap. Indicate resistance value and wattage required per section when ordering. Opt. A: Axial Lead (illustrated) Opt. R: Radial Lead Lead wires are attached to lug terminals to enable soldering direct to PCB. The resistor body can be supported by leads up to 25W size. Option L: Insulated Leads Stranded wire is soldered to lug terminals and insulated with shrink tubing. Also available ring terminal (Opt LR), quick-connect male (LM), female (LF), and various others. Option V: Adjustable Exposed winding enables adjustment of resistance value. Slider divides wattage rating proportionally. Available on edgewound and standard winding. Do not over-tighten. RCD Type T12 T20S T25 T50 T50S T75 T80 T100 T150 T175 T225 T300 T500 T600 T750 T1000 T1300 Wattage Rating 12 20 25 50 50 75 80 100 150 175 225 300 500 600 750 1K W 1.3KW Resistance Range* Standard 0.1Ω - 10K 0.1Ω - 15K 0.1Ω - 20K 0.1Ω - 40K 0.1Ω - 40K 0.1Ω - 50K 0.1Ω - 60K 0.1Ω -100K 0.1Ω -130K 0.13Ω-150K 0.16Ω-165K 0.4Ω-220K 0.5Ω-250K 0.8Ω -300K 0.8Ω -400K 1Ω - 500K 1Ω - 750K Adjustable (Opt.V) 0.1Ω - 3K 0.1Ω - 4K 0.1Ω - 6K 0.1Ω - 12K 0.1Ω - 12K 0.1Ω - 16K 0.1Ω - 18K 0.1Ω - 30K 0.1Ω -40K 0.13Ω -45K 0.16Ω -50K 0.4Ω - 66K 0.5Ω - 75K 0.8Ω - 90K 0.8Ω -120K 1Ω - 150K 1Ω - 200K L 1.76 [45] 2.0 [50] 2.0 [50] 4.0 [102] 3.55 [90] 6.0 [152.4] 4.35 [110] 6.4 [163] 7.7 {195] 8.5 [215] 10.5 [267] 10.2 [259] 13 [330] 15.7 [399] 18.1 [460] 21.3 [540] 25.6 [650] Dimensions Inch[mm], typical D .55 [14] .55 [14] .7 [18] .7 [18] 1.1 [28] .7 [18] 1.1 [28] 1.1 [28] 1.2 [30] 1.2 [30] 1.2 [30] 1.7 [43] 2.1 [53] 2.1 [53] 2.1 [53] 2.5 [63] 2.7 [69] I.D. (min) .2 [5] .2 [5] .3 [8] .3 [8] .5 [13] .3 [8] .5 [13] .5 [13] .63 [16] .63 [16] .63 [16] 0.9 [23] 1.2 [30] 1.2 [30] 1.2 [30] 1.4[35] 1.4 [35] H .4 [10] .4 [10] .48 [12] .48 [12] .67 [17] .48 [12] .67 [17] .67 [17] .75 [19] .75 [19] .75 [19] 1.0 [25] 1.0 [25] 1.0 [25] 1.0 [25] 1.15 [30] 1.15 [30] h (min) .08 [2] .08 [2] .08 [2] .08 [2] .16 [4.0] .08 [2] .16 [4.0] .16 [4.0] .16 [4.0] .16 [4.0] .16 [4.0] .18 [4.5] .18 [4.5] .18 [4.5] .18 [4.5] .22 [5.5] .22 [5.5] Option M (Mounting Bracket) M 2.15 [55] 2.6 [65] 2.68 [68] 4.72 [120] 5.12 [130] 6.69 [170] 5.90 [150] 8.00 [202] 9.25 [235] 10 [254] 12 [305] 11.8 [300] 15.0 [380] 17.7 [450] 20.1 [510] 23.4 [595] 27.6 [702] N 2.6 [65] 3.0 [76] 3.2 [80] 5.2 [132] 5.8 [147] 7.2 [182] 6.7 [171] 8.5 [216] 10 [254] 10.6 [269] 12.6 [321] 12.8 [325] 15.8 [402] 18.5 [470] 21.1 [535] 24.2 [615] 28.5 [722] P .12 [3] .12 [3] .16 [4] .16 [4] .22 [5.5] .16 [4] .22 [5.5] .22 [5.5] .22 [5.5] .24 [6] .24 [6] .31 [8] .35 [9] .35 [9] .35 [9] .35 [9] .35 [9] * Extended range available SPECIFICATIONS Standard Tolerance Temp. Coefficient (avail. to 20ppm) Dielectric Strength Overload Operating Temp. Derating Temperature Rise 1Ω and above: ±5% (avail. to ±0.1%), Below 1Ω: ±10% (avail. to ±1%) 260ppm/°C 1Ω and above, 400ppm/°C 0.1Ω to 0.99Ω 1000 VAC (terminal to mounting bracket) 10x rated power for 5 sec. -55°C to +350°C .31%/°C above 25°C ≈ 250 - 325°C @full rated W P/N DESIGNATION: RCD Type Options: X, V, T, R, M, L, J, G, EQ, A (leave blank for standard) T225 - 1R00 - F B W Resis.: 4-digit code for 0.1%-1% (3 signif. figures & multiplier), e.g. R100=0.1Ω, 1R00=1Ω, 1001=1KΩ. 3-digit code for 2%-10% (2 signif. figures & multiplier), e.g. R10=0.1Ω, 1R00=1Ω, 1000=100Ω, 1001=1K Tolerance: K=10%, J=5%, H=3%, F=1%, D=.5%, C=.25%, B=.1% Packaging: B = Bulk (standard) Termination: W= Pb-free, Q= SnPb (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA027C Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 50