RP75H-11024SRW/P-HC

Features • 4:1 wide input range • 3kVAC reinforced insulation for 110Vin 2.25kVDC basic insulation for 24Vin & 48Vin • Efficiency up to 91% • No minimum load required • UL60950-1, EN50155 & IEC/EN60950-1 certified Regulated Converter Description DC/DC Converter RP75H-RW 75 Watt 3 Half Brick Single Output YEA R y arrant w The half-brick RP75H series DC/DC converters are designed for railway rolling stock and high voltage battery applications. Each series has three 4:1 input voltage range options to cover all input voltages from 9VDC up to 160VDC with isolated and regulated 5V to 48VDC outputs. The converters have high efficiencies and metal baseplates to permit a wide operating temperature range from -40°C to +85°C (when mounted on a suitable heatsink). The case is fitted with threaded inserts to allow secure mounting to the PCB or bulkhead for use in high shock and vibration environments. The converters are EN50155, UL60950 and IEC/EN60950 certified. The RP75H-RW series have a three year warranty. T CONVER T S S RE M R R C TS compliant PL U D IA N T PRO CO 10 from 10 O REACH compliant M C M TS CONVER C M E O E C RoHS 2 + CO Part Number Input Output Output Input(1) Output Efficiency(1) Max. Capacitive Voltage Range Voltage Current Current Power typ. Load [VDC] [VDC] [mA] [mA] [W] [%] [µF] RP75H-2405SRW 9-36 5 15000 3551 75 88 30000 RP75H-2412SRW 9-36 12 6300 3579 75 88 5250 15 5000 3551 75 88 3330 RP75H-2415SRW 9-36 RP75H-2424SRW 9-36 24 3200 3678 76 87 1330 RP75H-2448SRW 9-36 48 1600 3678 77 87 330 RP75H-4805SRW 18-75 5 15000 1736 75 90 30000 RP75H-4812SRW 18-75 12 6300 1750 75 90 5250 89 3330 RP75H-4815SRW 18-75 15 5000 1755 75 RP75H-4824SRW 18-75 24 3200 1818 76 88 1330 RP75H-4848SRW 18-75 48 1600 1839 77 87 330 RP75H-11005SRW 43-160 5 15000 749 75 91 30000 12 6300 755 75 91 5250 RP75H-11012SRW 43-160 15 5000 749 75 91 3330 RP75H-11015SRW 43-160 RP75H-11024SRW 43-160 24 3200 775 76 90 1330 RP75H-11048SRW 43-160 48 1600 775 77 90 330 RE Selection Guide PL U D IA N T PRO E196683 EN50155 certified IEC/EN60950-1 certified UL60950-1 certified Notes: Note1: Efficiency is tested by nominal Vin, full load and at 25°C Model Numbering RP75H-__ __ SRW/_ _ Input Voltage Output Voltage Package(3) CTRL Logic(2) Single Notes: Note2: Note3: https://recom-power.com/rec-s-RREF04-RIA12.html standard part is with suffix “P” for positive logic (1=ON, 0=OFF) or add suffix “N” instead for negative logic (0=ON, 1=OFF) for more details refer to “ON/OFF CTRL (4)” add suffix “-HC” for premounted Heat-sink (refer to “Dimension Drawing Heat-sink (mm)”) (compatible with all other suffixes) Ordering Examples RP75H-2405SRW/N = 24V Input, 5V Output, Single, Neg. CTRL function RP75H-11012SRW/P = 110V Input, 12V Output, Single, Pos. CTRL function RP75H-11012SRW/P-HC = 110V Input, 12V Output, Single, Pos. CTRL function, with premounted Heat-sink www.recom-power.com REF DESIGN available REV.: 4/2020 SURGE PROTECTOR available https://recom-power.com/rec-sRSPxxx-168.html PB-1 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) BASIC CHARACTERISTICS Parameter Condition Min. Typ. nom Vin = 24V nom Vin = 48V nom Vin = 110V Vin = 24V, 1s max. Vin = 48V, 1s max. Vin = 110V, 1s max. 9VDC 18VDC 43VDC 24VDC 48VDC 110VDC Max. Internal Input Filter Input Voltage Range Input Surge Voltage Under Voltage Lockout (UVLO) Vin = 24V DC-DC ON DC-DC OFF 7.5VDC Vin = 48V DC-DC ON DC-DC OFF 16VDC Vin = 110V DC-DC ON DC-DC OFF 36VDC 18VDC 43VDC Output Voltage Trimming 185mA 90mA 85mA 50mA Vin = 24V Vin = 48V Vin = 110V refer to “OUTPUT VOLTAGE TRIMMING” Quiescent Current Pi-Type 36VDC 75VDC 160VDC 50VDC 100VDC 185VDC 9VDC 10mA -20% Minimum Load +10% 0% Power up Vin = 110V Vin = 24V, Vin = 48V 60ms 25ms Remote ON/OFF Vin = 110V Vin = 24V, Vin = 48V 60ms 25ms Start-up time Positive Logic DC-DC ON DC-DC OFF Open or 3.0VDC < VCRTL < 12VDC Short or 0VDC < VCRTL < 1.2VDC Negative Logic DC-DC ON DC-DC OFF Short or 0VDC < VCRTL < 1.2VDC Open or 3.0VDC < VCRTL < 12VDC Input Current of CTRL pin drive current ICTRL Standby Current DC-DC OFF IIn ON/OFF CTRL (4) refer to “ON/OFF CTRL” -0.5mA 1mA 3mA Internal Operating Frequency 270kHz Output Ripple and Noise 5 Vout 12, 15Vout 24Vout 48Vout with a 4.7µF/50V X7R MLCC with a 4.7µF/50V X7R MLCC with a 4.7µF/50V X7R MLCC with a 2.2µF/100V X7R MLCC measured by 20MHz BW 300kHz 330kHz 75mVp-p 100mVp-p 200mVp-p 300mVp-p 100mVp-p 125mVp-p 250mVp-p 350mVp-p % of set Vout (refer to „REMOTE SENSE“) Remote Sense 10% Notes: Note4: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin RP75H-2405SRW Efficiency vs. Output Current Efficiency vs. Input Voltage 100 100 90 90 80 70 Efficiency [%] Efficiency [%] 80 60 50 40 30 9Vin 24Vin 36Vin 20 10 0 10 20 30 40 50 60 70 Output Current [%] www.recom-power.com 80 90 70 60 50 40 100% Load 50% Load 25% Load 30 20 10 100 9 continued on next page REV.: 4/2020 12 15 18 21 24 27 30 33 36 Input Voltage [V] PB-2 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) RP75H-2405SRW Power Dissipation vs. Output Current Power Dissipation [W] 24 Typical Output Ripple and Noise/full load 20 16 12 8 9Vin 24Vin 36Vin 4 0 10 20 30 40 50 60 70 80 90 100 Output Current [%] ON/OFF Control Start-up Rise Characteristic RP75H-4805SRW Efficiency vs. Output Current 90 90 80 80 70 60 50 40 18Vin 24Vin 48Vin 75Vin 30 20 10 0 10 20 30 40 50 60 70 Efficiency vs. Input Voltage 100 Efficiency [%] Efficiency [%] 100 Power up Start-up Characteristic 80 90 70 60 50 40 100% Load 50% Load 25% Load 30 20 100 10 18 24 30 36 42 48 54 60 66 72 75 Input Voltage [V] Output Current [%] continued on next page www.recom-power.com REV.: 4/2020 PB-3 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) RP75H-4805SRW Power Dissipation vs. Output Current Typical Output Ripple and Noise/full load 24 Power Dissipation [W] 20 16 12 8 18Vin 48Vin 75Vin 4 0 10 20 30 40 50 60 70 80 90 100 Output Current [%] ON/OFF Control Start-up Rise Characteristic Power up Start-up Characteristic RP75H-11005SRW Efficiency vs. Output Current 100 90 70 Efficiency [%] Efficiency [%] 80 60 50 40 30 20 43Vin 110Vin 160Vin 10 0 10 20 30 40 50 60 70 80 90 Efficiency vs. Input Voltage 100 95 90 85 80 75 70 65 60 55 50 45 40 100 100% Load 50% Load 25% Load 43 50 60 70 80 90 100 110 120 130 140 150 160 Input Voltage [V] Output Current [%] continued on next page www.recom-power.com REV.: 4/2020 PB-4 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) Power Dissipation [W] RP75H-11005SRW Power Dissipation vs. Output Current Typical Output Ripple and Noise/full load 12 11 10 9 8 7 6 5 4 3 2 43Vin 110Vin 160Vin 1 0 10 20 30 40 50 60 70 80 90 100 Output Current [%] ON/OFF Control Start-up Rise Characteristic Power up Start-up Characteristic ON/OFF CTRL +Vin VCTRL -Vin IIN ICTRL +Vin +Vout +Vout Positve Logic DC-DC ON DC-DC OFF Open or 3.0VDC < VCTRL < 12VDC Short or 0VDC < VCTRL < 1.2VDC Negativ Logic DC-DC ON DC-DC OFF Short or 0VDC < VCTRL < 1.2VDC Open or 3.0VDC < VCTRL < 12VDC CTRL -Vin -Vout -Vout REMOTE SENSE +Vin RW2 +Vout The output voltage can be adjusted by both trim and remote sense. The maximum combined adjustment range ±10%. Derate the maximum output power if using the trim or sense function. +Sense R1 -Vin www.recom-power.com -Sense -Vout (GND) Load Trim R2 RW2 RW1 ... wire losses + RW2 ... wire losses R1 ... trim up resistor R2 ... trim down resistor REV.: 4/2020 PB-5 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) OUTPUT VOLTAGE TRIMMING Output Voltage Trimming RP75H-RW converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. The values for trim resistors shown in trim tables below are according to standard E96 values; therefore, the specified voltage may slightly vary; they also can be calculated with below shown equation. TRIM UP TRIM DOWN TRIM -Sense R1 R2 +Sense TRIM Trim Calculation R1 = R2 = 100*Vout+DVout * Vout) - 1.225*DVout 100 DVout - 2 kΩ (100+2DVout) DVout kΩ Vout = Output Voltage DVout = Output Voltage Trim in % R1 = trim up resistor R2 = trim down resistor Practical Example: Trim Up: Vout = 5V, DVout = 10% (5.5V) R1 = 100*Vout+DVout * Vout) - 1.225*DVout (100+2DVout) DVout kΩ = 100*5 +10*5 1.225*10 - 100+2*10 10 = 44.89 - 12 = 32.9kΩ Trim down: Vout = 5V, DVout = -10% (4.5V) R2 = 100 DVout - 2 kΩ = 100 10 - 2 = 8.06kΩ RP75H-xx05SRW Trim up 1 2 3 4 5 6 7 8 9 10 % Vout = 5.05 5.10 5.15 5.20 5.25 5.30 5.35 5.4 5.45 5.50 Volts R1 = 309 158 105 78.7 63.4 53.6 46.4 40.2 36.5 33.2 KOhms RP75H-xx12SRW Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 12.12 12.24 12.36 12.48 12.60 12.72 12.84 12.96 13.08 13.20 Volts 887 453 301 226 182 154 133 118 105 95.3 KOhms R1 = % continued on next page www.recom-power.com REV.: 4/2020 PB-6 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) OUTPUT VOLTAGE TRIMMING RP75H-xx15SRW Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 15.15 15.30 15.45 15.60 15.75 15.90 16.05 16.20 16.35 16.50 % R1 = 1130 576 383 294 237 196 169 150 137 124 KOhms % Volts RP75H-xx24SRW Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 24.24 24.48 24.72 24.96 25.20 25.44 25.68 25.92 26.16 26.40 R1 = 1870 953 634 487 392 324 280 249 226 205 KOhms % Volts RP75H-xx48SRW Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 48.48 48.96 49.44 49.92 50.40 50.88 51.36 51.84 52.32 52.80 R1 = 3830 1960 1300 1000 806 681 576 511 464 422 KOhms 1 2 3 4 5 6 7 8 9 10 % 97.6 47.5 31.6 23.2 17.8 14.7 12.1 10.5 9.09 8.06 Volts Trim Down all Vout‘s Trim down R2 = Trim down R2 = 11 12 13 14 15 16 17 18 19 20 7.15 6.34 5.76 5.11 4.64 4.22 3.92 3.57 3.24 3.01 KOhms % KOhms REGULATIONS Parameter Condition Value Output Accuracy ±1.0% Line Regulation low line to high line at full load ±0.1% Load Regulation 0% to 100% load 0.1% Transient Response 25% load step change 200µs typ.; 250μs max. Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load at nom.Vin RP75H-2405SRW RP75H-4805SRW continued on next page www.recom-power.com REV.: 4/2020 PB-7 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) RP75H-11005SRW PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) below 100mΩ continuous, automatic recovery Over Voltage Protection (OVP) % of nom. Vout 115%-130%, Hiccup Mode Over Load Protection (OLP) 24Vin, 48Vin 110Vin % Iout rated 120%-150%, Hiccup Mode 150% typ. , Hiccup Mode Over Temperature Protection (OTP) +115°C 110Vin I/P to O/P I/P or O/P to Baseplate 3kVAC/1minute 1.5kVAC/1minute 24Vin, 48Vin I/P to O/P I/P or O/P to Baseplate 2.25kVDC/1minute 1.6kVDC/1minute Isolation Voltage Isolation Resistance 500 VDC 1GΩ min. Isolation Capacitance 2500pF max. 24Vin, 48 Vin 110Vin Isolation Grade basic Insulation reinforced Insulation Notes: Note5: Refer to local wiring regulations if input over-current protection is also required. Recommended fuse: T30A slow blow ENVIRONMENTAL Parameter Condition Value Operating Case Temperature Range Baseplate refer to derating graph Maximum Case Temperature 105°C Temperature Coefficient Thermal Impedance ±0.02%/°C max. vertical direction by natural convection (0.1m/s) without Heat-sink vertical direction by natural convection (0.1m/s) with Heat-sink Operating Humidity Pollution Degree 5% - 95% RH 24Vin, 48Vin 110Vin PD1 PD2 Shock according to EN61373 standard Thermal Shock according to MIL-STD-810F standard Vibration according to EN61373 standard Fire protection on railway vehicles MTBF 6.7°C/W 4.7°C/W according to EN45545-2, 2013 standard according to MIL-HDBK-217F, G.B. +25°C 336.2 x 103 hours continued on next page www.recom-power.com REV.: 4/2020 PB-8 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) Thermal Calculation Rthcase-ambient = 6.7°C/W (vertical) Tcase = Case Temperature Rthcase-ambientHC = 4.7°C/W (vertical) Tambient = Environment Temperature Pdissipation = Internal losses T -T Rthcase-ambient =  case ambient PIN = Input Power Pdissipation POUT = Output Power h = Efficiency under given Operating Conditions P Pdissipation = PIN - POUT =  OUTapp P R = Thermal Impedance OUTapp thcase-ambient h Practical Example: Take the RP75H-2405SRW with 9V input Voltage and 50% load. What is the maximum ambient operating temperature? Use converter vertical in application without airflow. Effmin = 90% @ Vnom without Heat-sink with Heat-sink Tcasemax - Tamb 105-Tamb T 105-Tamb -T Rth = --> 6.7°C/W = RthHC = casemax amb --> 4.7°C/W = 3.26W Pdissipation Pdissipation 3.26W Tamb = 83°C TambHC = 89°C POUT = 75W POUTapp = 75 x 0.5 = 37.5W h = 92% (Efficiency vs. Load Graph) 37.5 Pdissipation = - 37.5 = 3.26W 0.92 Derating Graph(6) (@ Chamber and natural convection 0.1m/s) RP75H-2405SRW-HC 100 100 80 80 Output Power [%] Output Power [%] RP75H-2405SRW 60 40 0.5m/s 1m/s 1.5m/s 2m/s 2.5m/s 20 0 -40 -20 0 20 40 60 47 80 60 40 natural convection 0.5m/s 1m/s 1.5m/s 2m/s 2.5m/s 20 0 -40 100 120 -20 100 100 80 80 60 0 -40 0.5m/s 1m/s 1.5m/s 2m/s 2.5m/s -20 0 40 57 60 58 60 80 100 120 60 40 natural convection 0.5m/s 1m/s 1.5m/s 2m/s 2.5m/s 20 20 40 RP75H-4805SRW-HC Output Power [%] Output Power [%] RP75H-4805SRW 20 20 Ambient Temperature [°C] Ambient Temperature [°C] 40 0 80 0 -40 100 120 -20 0 20 40 60 65 80 100 120 Ambient Temperature [°C] Ambient Temperature [°C] continued on next page www.recom-power.com REV.: 4/2020 PB-9 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) RP75H-11005SRW RP75H-11005SRW-HC 80 80 Output Power [%] 100 Output Power [%] 100 60 40 0.5m/s 1m/s 1.5m/s 2m/s 2.5m/s 20 0 -40 -20 0 60 40 natural convection 0.5m/s 1m/s 1.5m/s 2m/s 2.5m/s 20 20 40 57 60 80 0 -40 100 120 -20 0 20 40 60 65 80 100 120 Ambient Temperature [°C] Ambient Temperature [°C] Notes: Note6: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E196683 Information Technology Equipment - General Requirements for Safety TW1608034-001, TW1608035-001 Standard UL60950-1, 2nd Edition, 2014 CSA C22.2 No. 60950-1-07, 2nd Edition, 2014 IEC60950-1, 2nd Edition, 2005 EN60950-1, 2006 Railway Applications - Electrical Equipment used on rolling stock 16A081501E-C EN50155, 2007 EAC RU-AT.49.09571 TP TC 004/2011 RoHS 2+ RoHS 2011/65/EU EMI Compliance Condition Information technology equipment - Radio disturbance characteristics Limits and methods of measurement Industrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods of measurement Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) 110Vin with external components Standard / Criterion EN55022, Class A and Class B EN55011, Class A and Class B 24Vin, 48Vin with external components ESD Electrostatic discharge immunity test Air ±8kV and Contact ±6kV Radiated, radio-frequency, electromagnetic field immunity test 20V/m (110Vin), 10V/m (24Vin,48Vin) Fast Transient and Burst Immunity(7) ±2kV EN55024 & EN50155 ±2kV (±1kV, 24Vin, 48Vin) Surge Immunity(7) 10 Vr.m.s Immunity to conducted disturbances, induced by radio-frequency fields Notes: Note7: EN61204-3, Class B EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A An external input filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. The 24Vin and 48Vin version recommend 2pcs of aluminium elecrolytic capacitor to connect in parallel. Recom suggest: 220µF/100V. The 110Vin version recommend 2pcs of aluminium electrolytic capacitor to connect in parallel. Recom suggest: 150µF/200V continued on next page www.recom-power.com REV.: 4/2020 PB-10 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) EMI Filtering RP75H-24/48xxSRW Class A according to EN61204-3 Class A and EN50121-1 (24Vin and 48Vin) C6 L1 C1 C2 C3 C5 C4 LOAD Fuse +VIN Case -VIN C9 C8 C7 C11 C10 Shield Plane MODEL +VIN Fuse C1 C1, C3 C6 to C11 L1 RP75H-24xxSRW L1 100µF, 50V Al Cap. Chemi-con KY Series 4.7µF, 50V 1812 MLCC 1000pF, 3kV 1808 MLCC 156µH CMC RP75H-48xxSRW 100µF, 100V C8 Chemi-con C9 C10 KY Series Al Cap. 2.2µF, 100V 1812 MLCC 1000pF, 3kV 1808 MLCC 620µH CMC C2 C3 RP75H-2405SRW Case Conducted Emission EN55032 Class A -VIN C7 C2, C4, C5C14 LOAD RP75H-100xxSRW Class A C5 C6 C4 C12 C11 C13 C16 C15 C13 C12 continued on next page Shield Plane RP75H-24/48xxSRW Class B C8 L2 L1 Fuse C1 C3 C2 C4 C5 RP75H-4805SRW C7 C6 LOAD +VIN Case Conducted Emission EN55032 Class A -VIN C15 C14 C11 C10 C9 Shield Plane RP75H-100xxSRW Class B C15 L2 L1 Fuse C1 C3 C2 C4 C10 C11 C12 LOAD +VIN Case continued on next page -VIN www.recom-power.com C5 C9 REV.: 4/2020 C8 C7 C6 C14 C13 PB-11 C16 C18 C17 C2 C3 C5 C4 LOAD C1 Case RP75H-RW -VIN DC/DC Converter C9 C8 Series C7 C11 C10 Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) EMI Filtering according to EN55032/11 Class A and EN50121-1 (110Vin) Shield Plane RP75H-100xxSRW Class A C14 L1 Fuse C1 C2 C3 C8 C10 C9 LOAD +VIN Case -VIN C7 C6 C5 C4 C12 C11 C13 C16 C15 Shield Plane MODEL C1, C8 C10 150µF, 200V Al Capacitor (lie down) Chemi-con KXJ L2 L1 C2, C3, C4, C6, C7, C9, C11, C12: N/A 1µF, 250V 1812 MLCC RP75H-110xxSRW +VIN Fuse C1 C3 C2 C4 C5 C13, C14 C6 1000pF, 400VAC C8 TDK CD Series C5, C15, C16 L1 1000pF, 5kV 1808 MLCC 521µH CMC C7 LOAD RP75H-24/48xxSRW Class B Case -VIN C15 C14 C11 C10 C9 C13 C12 RP75H-11005SRW Conducted Emission EN55032 Class A Shield Plane RP75H-100xxSRW Class B C15 L2 L1 Fuse C1 C3 C2 C4 C10 C11 C12 LOAD +VIN Case -VIN C5 C9 C8 C7 C6 C14 C13 C16 C18 C17 continued on next page www.recom-power.com REV.: 4/2020 Shield Plane PB-12 C7 C5 C6 C4 C12 C11 C13 C16 C15 RP75H-RW Shield Plane DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) RP75H-24/48xxSRW Class B EMI Filtering according to EN61204-3 Class B (24Vin and 48Vin) L2 L1 Fuse C1 C3 C2 C4 C5 C6 C7 LOAD +VIN C8 Case -VIN C15 C14 C11 C10 C9 C13 C12 Shield Plane C1, C5 C2, C3, C4, C6, C7 C8, C14, C15 100µF, 50V 4.7µF, 50V Al Cap. (lie down) Chemi-con KY 1812 MLCC L2 2.2µF, 100V L1 100µF, 100V Fuse RP75H-48xxSRW Al Cap. (lie down) Chemi-con KY 1812 MLCC RP75H-24xxSRW +VIN C3 C1 C2 RP75H-2405SRW C4 C10 C11 C9 C10 to C13 L1 L2 1000pF, 3kV 1808 MLCC 1000pF, 3kV C15 10nF, 2kV 1808 MLCC 1812 MLCC 305µH CMC 305µH CMC 1000pF, 3kV 1808 MLCC 4700pF, 3kV 1812 MLCC 1186µH CMC 156µH CMC 10nF, 2kV 1812 MLCC C12 LOAD RP75H-100xxSRW Class B MODEL Conducted Emission EN55032 Class B Case -VIN C5 C9 C8 C7 C6 C14 C13 C16 C18 C17 Shield Plane RP75H-4805SRW Conducted Emission EN55032 Class B continued on next page www.recom-power.com REV.: 4/2020 PB-13 -VIN C15 C14 C11 RP75H-RW C10 C9 C13 DC/DC Converter Series Shield Plane Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) C12 RP75H-100xxSRW Class B EMI Filtering according to EN55032/11 Class B (110Vin) C15 L2 C1 C3 C2 C4 C10 C11 C12 LOAD L1 Fuse +VIN Case -VIN C5 C9 C8 C7 C6 C14 C16 C13 C18 C17 Shield Plane MODEL RP75H-110xxSRW C1, C3, C10 C11, C12 C13 C15, C16 C6, C7, C8, C9, C17, C18 L1 L2 150µF, 200V Al Cap. (lie down) Chemi-con KXJ 1µF, 250V 1812 MLCC 330pF, 5kV 1808 MLCC 1000pF, 400VAC TDK CD Series 1000pF, 5kV 1808MLCC 305µH CMC 806µH CMC C2, C4, C5, C14: N/A RP75H-11005SRW Conducted Emission EN55032 Class B DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Material Type Value case 24Vin, 48Vin 110Vin Metal Plastic baseplate 24Vin, 48Vin 110Vin FR4 PCB Aluminium potting Silicone (UL94 V-0) Dimensions (LxWxH) without Heat-sink with Heat-sink 61.0 x 57.9 x 12.7mm 61.0 x 57.9 x 24.13mm Weight without Heat-sink with Heat-sink 105g 157g continued on next page www.recom-power.com REV.: 4/2020 PB-14 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) Dimension Drawing (mm) 24Vout, 48Vout: 24Vin, 48Vin 61.0 0.6 5.08 12.1 57.9 Ø2.0±0.1 Ø1.0±0.1 M3 12.7 4.8 5 3 6 Bottom View 7 2 8 1 9 FC 50.80 10.16 17.78 25.40 35.56 4 Pin Connections Pin # 5.1 4xM3 FC 48.26 Single 1 +Vin 2 CTRL 3 Case 4 -Vin 5 -Vout 6 -Sense 7 Trim 8 +Sense 9 +Vout FC= Fixing Centers for Heat-sink Pin Pitch Tolerance ±0.25mm Pin Dimension Tolerance ±0.1mm XX.X ± 0.5mm XX.XX ± 0.25mm 110Vout: 110Vin 61.0 Ø2.0±0.1 Ø1.0±0.1 5.08 12.7 57.9 M3 4 5 3 6 Bottom View 7 2 8 1 9 FC 50.80 10.16 17.78 25.40 35.56 12.7 4.8 5.1 4xM3 FC 48.26 continued on next page www.recom-power.com REV.: 4/2020 PB-15 RP75H-RW DC/DC Converter Series Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted) Dimension Drawing Heat-sink (mm) 110Vin 57.9 Notes: Note8: Max. tightening torque for Heat-sink: 0.34Nm 50.80 61.0 48.26 24.13 11.43 4xM3 Ø2.0±0.1 Ø1.0±0.1 PACKAGING INFORMATION Parameter Packaging Dimension Type Tray Value without Heat-sink with Heat-sink Packaging Quantity 157.0 x 88.0 x 23.0mm 157.0 x 88.0 x 35.0mm 2pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 4/2020 PB-16