1N4007G

1N4001G THRU 1N4007G GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * High reliability Low cost Low leakage Low forward voltage drop High current capability Glass passivated junction MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 gram .034 (0.9) DIA. .028 (0.7) 1.0 (25.4) MIN. .205 (5.2) .166 (4.2) .107 (2.7) .080 (2.0) DIA. 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) SYMBOL RATINGS 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time IO Amps I FSM 30 Amps 2 3.74 AS IT Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range Volts 1.0 CJ 15 RQJA T J , T STG 50 -65 to + 175 2 pF 0 C/ W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC @T A = 25 o C Maximum DC Reverse Current at Rated DC Blocking Voltage @T A= 150 o C NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF IR 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS 1.0 Volts 0.2 uAmps 400 2020-11 REV:E 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.5 0 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT, (PA) AVERAGE FORWARD CURRENT, (A) 2.0 10000 1000 TA = 150 OC 100 10 TA = 100 OC 0.1 TA = 25 OC 0.01 0 20 O AMBIENT TEMPERATURE, ( C) CJ, JUNCTION CAPACITANCE, (pF) INSTANTANEOUS REVERSE CURRENT, (A) 10 TJ = 150 OC TJ = 25 OC 0.1 Pulse width=300PS 1% Duty Cycle 0.01 0.8 1.0 1.2 1.4 1.6 1.8 10 8 6 4 2 0.4 0.1 25 20 15 10 8 10 20 40 1.0 4 10 40 80 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.4 TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE(℃/W) 8.3mS Single Half Sine-Wave JEDEC Method 6 140 REVERSE VOLTAGE, (V) 30 4 120 TJ = 25 OC FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 2 100 20 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 1 80 40 1 0.6 60 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 100 1 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) 1 RATING AND CHARACTERISTIC CURVES ( 1N4001G THRU 1N4007G ) 100 10 1 0.1 0.01 0.1 1 10 100 t - PULSE DURATION(s) FIG.6 TYPICAL TRANSIENT THERMAL IMPEDANCE AXIAL LEAD TAPING SPECIFICATIONS FOR RECTIFIERS Axial lead devices are packed in accordance with EIA standard RS-296-D and specifications given below. COMPNENT OUTLINE R-1 A-405 A-405 DO-41 DO-41 DO-15 R-3 DO-201AD R-6 COMPONENT PITCH A 0.5mm (.020") 5.0mm 5.0mm 5.0mm 5.0mm 5.0mm 5.0mm 5.0mm 10.0mm 10.0mm INNER TAPE PITCH B 0.5mm (.020") 1.5mm (.059") 26.0mm 26.0mm 52.4mm 26.0mm 52.4mm 52.4mm 52.4mm 52.4mm 52.4mm O Z CUMULATIVE PITCH TOLERANCE 2.0mm/20pitch 2.0mm/20pitch 2.0mm/20pitch 2.0mm/20pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch O 90 5 DO A E W L1 D1 B L2 D T E Fig.: Configuration of AXIAL LEAD TAPING ITEM Component alignment Tape width Exposed adhesive Body eccentricity Reel outside diameter Reel inner diameter Feed hole diameter Reel width Notes : SYMBOL Z T E IL1-L2I D D1 D0 W SPECIFICATIONS (mm) 1.2 Max. 6.0 0.4 0.8 Max. 1.0 Max. 330.0 85.7 0.3 30.5 0.4 79.0 1.0 1.Each component lead shall be sandwiched between tapes for a minimum of 3.2mm (0.126"). 2.The reel width "W" for 26mm taping is 50.0 1.0mm (1.97" 0.040"). SPECIFICATIONS (inch) 0.047 Max. 0.236 0.016 0.032 Max. 0.039 Max. 13.0 3.374 0.012 1.201 0.016 3.110 0.039 PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE DO-41 -B EA PER BOX INNER BOX SIZE (mm) 1,000 194*75*21 CARTON SIZE EA PER CARTON (mm) 415*220*255 50,000 GROSS WEIGHT(Kg) 16.2 eg(TYPE):1N4007G-B REEL PACK PACKAGE DO-41 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 5,000 5,000 5.0 52 330 355*350*335 20,000 10.49 AMMO PACK PACKAGE PACKING CODE REEL ( EA ) COMPONENT TAPE SPACE SPACE(mm) (mm) DO-41 -F 3,000 5.0 52 DO-41 -E 3,000 5.0 26 BOX SIZE (mm) CARTON SIZE(mm) CARTON ( EA ) GROSS WEIGHT (Kg) 255*73*100 400*268*225 30,000 13.0 256*48*94 42,000 12.41 365*270*217 RECTRON Attachment information about 1N400XG 1. Internal Circuit Anode Cathode 2. Marking on the body Cathode Band Plant - code Rectron Logo Part No. V X X 1N 4 0 0 X G Year – code (Y: Last digit of year & A:2010,B:2011……) Month – code (M:0~9,O,N,D) Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.