1SMAF2EZ33

1SMAF2EZ3.6 THRU SURFACE MOUNT SILICON ZENER DIODE 1SMAF2EZ200 VOLTAGE 3.6~200 Volts POWER2 Watts SMAF FEATURES • For surface mounted applications in order to optimize board space • Built-in strain relief • Glass passivated junction   • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O 3.50   • High temperature soldering : 260°C /10 seconds at terminals • Lead free in comply with EU RoHS 2002/95/EC directives • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case : SMAF Molded Plastic • Terminals : Solderable per MIL-STD-750, Method 2026 • Polarity : Color band denotes cathode end • Standard packaging : 12mm tape (EIA-481) • Weight : 0.0011 ounces, 0.0328 grams • Marking : Marking Code 1 Cathode 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating Ratings at 25°C ambient temperature unless otherwise specified. Symbol Value Unit DC Power Dissipation at T L = 75 °C (Note1) PD 2.0 W Maximum Forward Voltage at IF = 200 mA VF 1.2 V Junction Temperature Range TJ - 55 to + 175 °C Storage Temperature Range TSTG - 55 to + 175 °C 2018-11/88 REV:O ELECTRICAL CHARACTERISTICS Rating at = 25 q C ambient temperature unless otherwise specified TYPE 1SMAF2EZ3.6 1SMAF2EZ3.9 1SMAF2EZ4.3 1SMAF2EZ4.7 1SMAF2EZ5.1 1SMAF2EZ5.6 1SMAF2EZ6.2 1SMAF2EZ6.8 1SMAF2EZ7.5 1SMAF2EZ8.2 1SMAF2EZ9.1 1SMAF2EZ10 1SMAF2EZ11 1SMAF2EZ12 1SMAF2EZ13 1SMAF2EZ14 1SMAF2EZ15 1SMAF2EZ16 1SMAF2EZ17 1SMAF2EZ18 1SMAF2EZ19 1SMAF2EZ20 1SMAF2EZ22 1SMAF2EZ24 1SMAF2EZ27 1SMAF2EZ30 1SMAF2EZ33 1SMAF2EZ36 1SMAF2EZ39 1SMAF2EZ43 1SMAF2EZ47 1SMAF2EZ51 1SMAF2EZ56 1SMAF2EZ62 1SMAF2EZ68 1SMAF2EZ75 1SMAF2EZ82 1SMAF2EZ91 1SMAF2EZ100 1SMAF2EZ110 1SMAF2EZ120 1SMAF2EZ130 1SMAF2EZ140 1SMAF2EZ150 1SMAF2EZ160 1SMAF2EZ170 1SMAF2EZ180 1SMAF2EZ190 1SMAF2EZ200 Nominal Zener Voltage Marking VZ @ IZT IZT (V) (mA) 2000 20A0 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2022 2024 2027 2030 2033 2036 2039 2043 2047 2051 2056 2062 2068 2075 2082 2091 2100 2110 2120 2130 2140 2150 2160 2170 2180 2190 2200 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 140 150 160 170 180 190 200 139 128 116 106 98.0 89.5 80.5 73.5 66.5 61.0 55.0 50.0 45.5 41.5 38.5 35.7 33.4 31.2 29.4 27.8 26.3 25.0 22.8 20.8 18.5 16.6 15.1 13.9 12.8 11.6 10.6 9.8 9.0 8.1 7.4 6.7 6.1 5.5 5.0 4.5 4.2 3.8 3.6 3.3 3.1 2.9 2.8 2.6 2.5 Note : ( 1 ) " EZ " will be omitted in marking on the diode ZZT @ IZT (:) Maximum Zener Impedance ZZK @ IZK (:) IZK (mA) Maximum Reverse Leakage Current IR @ VR (V) (P A) 5.0 5.0 4.5 4.5 3.5 2.5 1.5 2.0 2.0 2.3 2.5 3.5 4.0 4.5 5.0 5.5 7.0 8.0 9.0 10 11 11 12 13 18 20 23 25 30 35 40 48 55 60 75 90 100 125 175 250 325 400 500 575 650 675 725 825 900 400 400 400 550 600 500 700 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 4000 4500 5000 5500 6000 6500 7000 7000 8000 8000 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 80 30 20 5.0 5.0 5.0 5.0 5.0 50 50 50 50 50 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 7.6 8.4 9.1 9.9 10.6 11.4 12.2 13.0 13.7 14.4 15.2 16.7 18.2 20.6 22.5 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 62.2 69.2 76.0 83.6 91.2 98.8 106.4 114.0 121.6 130.4 136.8 144.8 152.0 Maximum DC Zener Current IZM (mA) 504 468 434 386 356 324 292 266 242 220 200 182 166 152 138 130 122 114 107 100 95 90 82 76 68 60 55 50 47 43 39 36 32 29 27 24 22 20 18 17 15 14 13 12 11 11 10 10 9.0 PD, MAXIMUM DISSIPATION (WATTS) RATING AND CHARACTERISTICS CURVES ( 1SMAF2EZ3.6 THRU 1SMAF2EZ200 ) 2.5 L = 3/8" (9.5mm) 2.0 1.5 1.0 0.5 0 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE (qC) Fig. 1 POWER TEMPERATURE DERATING CURVE b-RAMGE FPRIMOTSTP 12 TO 51 VOLTS o Fig. 2 TEMPERATURE COEFICIENTS (-55 C TO 150 o C TEMPERATURE RANGE;90% OF THE UNITS ARE IN THE RANGES INDICATED ) Fig. 3 TYPICAL THERMAL RESISTANCE VERSUS LEAD LENGT Fig. 4 EFFECT OF ZENER CURRENT RATING AND CHARACTERISTICS CURVES ( 1SMAF2EZ3.6 THRU 1SMAF2EZ200 ) Fig. 5 MAXIMUM SURGE POWER Fig. 6 EFFECT OF ZENER CURRENT ON ZENER IMPEDANCE Fig. 7 EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE Fig. 8 TYPICAL CAPACAITANCE VERSUS Vz Fig. 10 TYPICAL FORWARD CHARACTERISTICS Fig. 9 TYPICAL LEAKAGE CURRENT Marking Description 2000 Code for Part No. V Y W W Cathode Band Year – code (Y:Last digit of year& A:2010,B:2011……) Week – code (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMAF PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 3,000 12,000 --- --- 178 390*205*310 96,000 --- DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.