EMD4S

EMD1S THRU EMD4S SINGLE-PHASE GLASS PASSIVATED MINI SUPER FAST SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE RANGE 50 to 200 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * Surge overload rating - 20 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.5 gram MD-S MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O 1 2 3 4 M D 0.028(0.9) .004(0.10) MAX. 0.020(0.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.152(3.6) 0.157(4.0) 0.145(3.6) 0.193(4.9) 0.177(4.5) 0.260(6.6) 0.092(2.34) 0.157(4.0) 2.756(7.0) 0.108(2.74) 0.106(2.7) 0.091(2.3) 0.014(0.35) Ratings at 25 o C ambient temperature unless otherwise specified. Resistive or inductive load. 0.006(0.15) 0.193(4.9) 0.177(4.5) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) SYMBOL EMD1S EMD2S EMD3S EMD4S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 105 140 Volts Maximum DC Blocking Voltage VDC 50 100 150 200 RATINGS Maximum Average Forward Output Current at T A =30 OC Volts IO 1.0 Amps I FSM 20 Amps Typical Current Square Time I 2T 1.6 A 2S Typical Junction Capacitance (Note 2) CJ 15 pF T J, T STG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range 0 C ELECTRICAL CHARACTERISTICS(At TA = 25 C unless otherwise noted) o SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per Bridge VF Element at 0.5A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Maximum Reverse Recovery Time (Note 3) Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Measure at 1MHz and applied reverse voltage of 4.0 volts. 3. Test Condition : I F=0.5A, I R= -1.0A,I RR= -0.25A. IR trr EMD1S EMD2S EMD3S 1.05 EMD4S UNITS Volts 10 uAmps 0.5 mAmps 50 nS 2017-05 REV: C RATING AND CHARACTERISTICS CURVES ( EMD1S THRU EMD4S ) trr 50 NONINDUCTIVE (+) 25 Vdc (approx) (-) +0.5A 10 NONINDUCTIVE (-) D.U.T 0 PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE -0.25A (+) OSCILLOSCOPE (NOTE 1) NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. -1.0A 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SET TIME BASE FOR 20/1 ns/cm FIG.1 TEST CIRCUIT DIAGRAM AND REVE ERSE RECOVERY TIME CHARACTERISTIC 1.5 TJ = 25 OC 100 AVERAGE FORWARD CURRENT, (A) JUNCTION CAPACITANCE, (pF) 200 60 40 20 10 6 4 2 1 0.1 0.2 0.4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.2 TYPICAL JUNCTION CAPACITANCE 100 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.3 TYPICAL FORWARD CURRENT DERAT TING CURVE 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 0 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) 60 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 NUMBER OF CYCLES AT 60Hz 0 0.5 1.0 2.0 FIG.5 MAXIMUM INSTANTANEO OUS RACTERISTICS FORWARD CHAR 100 TA = 25 OC 10 1.0 0.1 0 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( EMD1S THRU EMD4S ) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.6 TYPICAL REVERSE CHARACTERISTICS 2.5 Mounting Pad Layout .276 Max. (7.0 Max.) .105 (2.67) .095 (2.41) .035 Min. (0.90 Min.) Dimensions in inches and (millimeters) .030 Min. (0.76 Min.) Marking Description  Part No. + EMDXS Voltage-code Rectron Logo V Y W W 1-------50V 2-------100V Year – code (Y: Last digit of year) Week – code (WW: 01~52) 3-------150V 4-------200V PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX MD-S -T 500 2,000 --- --- 178 390*205*310 16,000 --- MD-S -W 3,000 6,000 --- --- 330 360*355*360 48,000 15.50 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.