RLA075A

SIDACTOR RLA058A THRU RLA320A FEATURES * * * * * * Low switching noise L ow forward voltage drop H igh current capability High s witching capability H igh surge capabitity High r eliability DO-214AC MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 9 4V-O Lead: MIL-STD-202E method 208C guaranteed Metallurgically bonded construction Mounting position: Any Weight: 0.057 gram 0.067 (1.70 ) 0.051 (1.29 ) 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 0.059 ( 1.50 ) 0.035 ( 0.89 ) 0.008 ( 0.203 ) 0.004 ( 0.102 ) 0.209 ( 5.31 ) 0.185 ( 4.70 ) Dimensions in inches and (millimeters) MAXIMUM RAT INGS (@ TA=25 OC unless otherwise noted) R ATINGS Off-state Capacitance (Note 1) Peak One-Cycle Surge Current (Note 2) SYMBOL CO I TSM RLA058A RLA065A RLA075A RLA160A RLA190A RLA220A RLA275A RLA320A UNITS 85 50 38 35 pF Amps E LECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Peak Off-state Voltage @I DRM = 5uA Switching Voltage @I S = 800mA (Note 3) Minimum On-state Voltage at 1.0A Holding Current NOTES : 1. 2. 3. 4. SYMBOL RLA058A RLA065A RLA075A VDRM VS VT IH 58 77 65 88 75 98 RLA160A RLA190A RLA220A RLA275A RLA320A UNITS 160 220 4 190 260 150 220 300 275 350 320 400 V V Volts mA 2007-09 Off-state capacitance is measured at 10KHz @0.3V with a DC48V bias. Surge rating test standard : 10/100uS. Vs is measured at 100V/uS. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. RATING AND CHARACTERISTICS CURVES ( RLA058A THRU RLA320A ) +I IPP, PEAK PULSE CURRENT, (% IPP) IT IS IH -V IDRM VT VDRM VS +V 100 50 -I 0 tr td t, TIME, (uS) FIG.1 V-I CHARACTERISTICS 14 PERCENT OF VS CHANGE, (%) FIG.2 PULSE WAVE-FORM 12 8 6 4 2 0 -2 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 RATIO OF I (T =25OC) HC 10 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 25 OC 25 C O IH TJ, JUNCTION TEMPERATURE, (OC) CASE TEMPERATURE, (OC) FIG.3 NORMALIZED VS CHANGE vs. JUNCTION TEMPERATURE FIG.4 NORMALIZED DC HOLDING CURRENT vs. CASE TEMPERATURE Mounting Pad Layout 0.094 MAX. (2.38 MAX.) 0.060MIN. ( 1.52 MIN.) 0.052 MAX. (1.32 MAX.) 0.220 (5.58) REF Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.