RS406L

RS401L THRU RS407L SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes FEATURES * * * * * Tin-plated copper leads Surge overload rating: 150 amperes peak Low leakage Mounting position: Any Low forward voltage RS-4L .768 (19.5) .728 (18.5) MECHANICAL DATA .580(14.7) * Epoxy: Device has UL flammability classification 94V-O * Epoxy: UL listed the recognized component,file #94233 .640 (16.3) .600 (15.2) .540 (13.7) DIA. .052 (1.3) .048 (1.2) .669 (17.0) MIN. .220 (5.6) .083 (2.1) .180 (4.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .237 (6.0) o Ratings at 25 C ambient temperature unless otherwise specified. .217(5.5) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RS401L RS402L RS403L RS404L RS405L RS406L RS407L UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T A = 50 C IO 4.0 Amps 150 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM Typical Current Squarad Time I t 2 93.37 A2Sec Volts Insulation voltage Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 3) Operating and Storage Temperature Range Viso 3000 R θ JC 10 R θ JA 28 CJ 40 T J, T STG 0 C/ W pF 0 -55 to + 150 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 4.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25o C @T A = 150o C SYMBOL VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant". 3. Measureed at 1MHz and applied reverse voltage of 4.0 volts. RS401L RS402L RS403L RS404L 1.05 RS405L RS406L RS407L UNITS Volts 2.0 500 uAmps 2021-07 REV: H AVERAGE FORWARD CURRENT, (A) 4.0 3.2 2.4 1.6 Single Phase Half Wave 60 Hz Inductive or Resistive Load 0.8 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES (RS401L THRU RS407L) 40 10 4 1 0.4 0.1 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 O AMBIENT TEMPERATURE, ( C) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (μA) 1000 100 TA = 150 OC 10 1.0 TA = 25 OC 0 20 40 60 80 100 1.0 1.5 2.0 2.5 3.0 3.5 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 0.1 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 180 8.3mS Single Half Sine-Wave JEDEC Method 150 120 90 60 30 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT " " " "" " " Marking Description Rectron Logo RS407L Part No. Voltage-code UL Logo Year – code: (Y: Last digit of year & A:2010,B:2011......) + V Y WW AC - Week – code: (WW:01~52) 7---for all Voltage range PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE RS-4L -C EA PER BOX 1,012 INNER BOX SIZE CARTON SIZE (mm) (mm) 491*145*133 495*323*157 EA PER CARTON WEIGHT(Kg) 2,024 14.5 BULK PACK PACKAGE PACKING CODE RS-4L -B EA PER BOX 500 INNER BOX SIZE CARTON SIZE (mm) (mm) 225*227*45 475*245*168 EA PER CARTON 3,000 GROSS WEIGHT(Kg) 15.0 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.