HA178L00

HA178L00 Series 3-terminal Fixed Voltage Regulators REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Description The HA178L00 series three-terminal fixed output voltage regulators. Can be used not only as stabilized power sources, but also as Zener diodes because of their small outline package. Features • • • • Maximum output current: 150 mA (Tj = 25°C) Large maximum power dissipation: 800 mW Overcurrent protection Temperature protection circuit Ordering Information Application Industrial use Commercial use Standard Output Voltage Tolerance ±8% HA178L00P HA178L00 A Version Output Voltage Tolerance ±5% HA178L00PA HA178L00A HA178L00UA REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 1 of 15 HA178L00 Series Output Voltage and Part No. HA178L00PA • HA178L00P • HA178L00A • HA178L00 Output Voltage (V) 2.5 5 5.6 6 8 9 10 12 15 Part No. HA178L02 HA178L05 HA178L56 HA178L06 HA178L08 HA178L09 HA178L10 HA178L12 HA178L15 Package Name TO-92 ModV Package Code PRSS0003DC-A HA178L00UA Output Voltage (V) 2.5 5 5.6 6 8 9 10 12 15 Part No. HA178L02UA HA178L05UA HA178L56UA HA178L06UA HA178L08UA HA178L09UA HA178L10UA HA178L12UA HA178L15UA Marking 8A 8B 8C 8D 8E 8F 8G 8H 8J Package Name UPAKV Package Code PLZZ0004CA-A REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 2 of 15 HA178L00 Series Pin Arrangement • TO-92 ModV • UPAKV 4 1 2 3 1. OUT 2. GND 3. IN 1 2 3 1. OUT 2. GND 3. IN 4. GND Block Diagram (3) IN Over Current Protection (1) OUT Error Amp. Temperature Protection Vref = 2.5 V Reference Voltage (2) GND Standard Circuit Input VIN HA178Lxx CIN 0.33µF COUT 0.1µF Output VOUT REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 3 of 15 HA178L00 Series UPAKV Product (HA178L00UA) Mark Patterns The mark patterns shown below are used on UPAKV products, as the package is small. Note that the product code and mark pattern are different. The pattern is laser-printed. OUT (1) (2) GND Band mark IN (3) (4) (5) Notes: 1. Boxes (1) to (5) in the figures show the position of the letters or numerals, and are not actually marked on the package. 2. (1) and (2) show the product-specific mark pattern. Output Voltage (V) 2.5 5 5.6 6 8 9 10 12 15 Part No. HA178L02UA HA178L05UA HA178L56UA HA178L06UA HA178L08UA HA178L09UA HA178L10UA HA178L12UA HA178L15UA Mark Pattern (2 digit) 8A 8B 8C 8D 8E 8F 8G 8H 8J 3. (3) shows the production year code (the last digit of the year). 4. (4) shows the production month code. Production Month Marked Code 1 A 2 B 3 C 4 D 5 E 6 F 7 G 8 H 9 J 10 K 11 L 12 M 5. (5) shows the production week code. REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 4 of 15 HA178L00 Series Absolute Maximum Ratings (Ta = 25°C) Item Input voltage Power dissipation Operating ambient temperature Storage temperature Note: VIN PT Topr Tstg Symbol Rating 35 800 800 –40 to +85 –55 to +150 Unit V mW °C °C Note TO-92 ModV * 2 UPAKV * 1 1. Ta ≤ 25°C, If Ta >25°C, derate by 6.4 mW/°C (See figure A) 2. 15mm × 25mm × 0.7 mm alumina ceramic board, Ta ≤ 25°C (See figure B) Maximum Power Dissipation PT (mW) Maximum Power Dissipation PT (mW) 1,000 1,200 1,000 800 600 400 (1) 200 0 (2) (1) Non Board (2) 15mm × 25mm × 0.7mm Alumina Ceramic Board 800 600 416 400 200 0 −20 0 25 50 75 85 100 25 50 75 100 125 150 Ambient Temperature Ta (°C) Figure A Ambient Temperature Ta (°C) Figure B REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 5 of 15 HA178L00 Series Electrical Characteristics HA178L02 (VIN = 10 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L02P HA178L02 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 2.32 — — — — — Output voltage VOUT 2.28 2.28 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 2.48 35 30 14 9.5 4.5 — — 3.0 — — 60 +0.2 Max 2.64 125 100 — 50 25 2.68 2.68 6.0 1.5 0.2 — — HA178L02PA HA178L02A HA178L02UA Min 2.38 — — — — — 2.35 2.35 — — — — — Typ 2.48 35 30 14 9.5 4.5 — — 3.0 — — 60 +0.2 Max 2.58 95 75 — 50 25 2.61 2.61 6.0 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 7 V ≤ VIN ≤ 20 V 8 V ≤ VIN ≤ 20 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 7 V ≤ VIN ≤ 20 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 9 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 8.0 V ≤ VIN ≤ 20 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 8.0 V ≤ VIN < 18 V, Tj = 25°C IOUT = 5 mA Test Conditions HA178L05 (VIN = 10 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L05P HA178L05 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 4.68 — — — — — Output voltage VOUT 4.6 4.6 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 5.0 55 45 16 11 5.0 — — 3.0 — — 58 +0.1 Max 5.32 200 150 — 60 30 5.4 5.4 6.0 1.5 0.2 — — 4.8 — — — — — 4.75 4.75 — — — — — HA178L05PA HA178L05A HA178L05UA Min Typ 5.0 55 45 16 11 5.0 — — 3.0 — — 58 +0.1 Max 5.2 150 100 — 60 30 5.25 5.25 6.0 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 7 V ≤ VIN ≤ 20 V 8 V ≤ VIN ≤ 20 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 7 V ≤ VIN ≤ 20 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 10 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 8.0 V ≤ VIN ≤ 20 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 8.0 V ≤ VIN < 18 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 6 of 15 HA178L00 Series HA178L56 (VIN = 11 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L56P HA178L56 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 5.24 — — — — — Output voltage VOUT 5.16 5.16 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 5.6 50 45 17 11 5.0 — — 3.0 — — 58 +0.1 Max 5.96 200 150 — 60 30 6.04 6.04 6.0 1.5 0.2 — — HA178L56PA HA178L56A HA178L56UA Min 5.38 — — — — — 5.32 5.32 — — — — — Typ 5.6 50 45 17 11 5.0 — — 3.0 — — 58 +0.1 Max 5.82 150 100 — 60 30 5.88 5.88 6.0 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 7.6 V ≤ VIN ≤ 21 V 8.5 V ≤ VIN ≤ 21 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 7.6 V ≤ VIN ≤ 21 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 11 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 8.5 V ≤ VIN ≤ 2.0 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 8.5 V ≤ VIN < 18.5 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C HA178L06 (VIN = 11 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L06P HA178L06 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 5.61 — — — — — Output voltage VOUT 5.52 5.52 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 6.0 50 45 17.5 12 5.5 — — 3.0 — — 57 +0.1 Max 6.39 200 150 — 70 35 6.48 6.48 6.0 1.5 0.2 — — HA178L06PA HA178L06A HA178L06UA Min 5.76 — — — — — 5.7 5.7 — — — — — Typ 6.0 50 45 17.5 12 5.5 — — 3.0 — — 57 +0.1 Max 6.24 150 110 — 70 35 6.3 6.3 6.0 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 8.1 V ≤ VIN ≤ 21 V 9.0 V ≤ VIN ≤ 21 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 8.1 V ≤ VIN ≤ 21 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 11 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 9.0 V ≤ VIN ≤ 20 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 9.0 V ≤ VIN < 19 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 7 of 15 HA178L00 Series HA178L08 (VIN = 14 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L08P HA178L08 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 7.48 — — — — — Output voltage VOUT 7.36 7.36 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 8.0 20 12 22 15 7.0 — — 3.0 — — 55 –0.1 Max 8.52 200 150 — 80 40 8.64 8.64 6.5 1.5 0.2 — — 7.7 — — — — — 7.6 7.6 — — — — — HA178L08PA HA178L08A HA178L08UA Min Typ 8.0 20 12 22 15 7.0 — — 3.0 — — 55 –0.1 Max 8.3 175 125 — 80 40 8.4 8.4 6.5 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 10.5 V ≤ VIN ≤ 23 V 11 V ≤ VIN ≤ 23 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 10.5 V ≤ VIN ≤ 23 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 14 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 11 V ≤ VIN ≤ 23 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 12 V ≤ VIN < 23 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C HA178L09 (VIN = 15 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L09P HA178L09 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 8.42 — — — — — Output voltage VOUT 8.28 8.28 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 9.0 80 20 24.5 17 8.0 — — 3.1 — — 55 –0.15 Max 9.58 230 160 — 90 45 9.72 9.72 6.5 1.5 0.2 — — HA178L09PA HA178L09A HA178L09UA Min 8.64 — — — — — 8.55 8.55 — — — — — Typ 9.0 80 20 24.5 17 8.0 — — 3.1 — — 55 –0.15 Max 9.36 200 160 — 90 45 9.45 9.45 6.5 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 11.4 V ≤ VIN ≤ 24 V 12 V ≤ VIN ≤ 24 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 11.4 V ≤ VIN ≤ 24 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 15 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 12 V ≤ VIN ≤ 24 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 12 V ≤ V < 24 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 8 of 15 HA178L00 Series HA178L10 (VIN = 16 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L10P HA178L10 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 9.35 — — — — — Output voltage VOUT 9.2 9.2 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 10 80 30 26 18 8.5 — — 3.1 — — 54 –0.2 Max 10.65 230 170 — 90 45 10.8 10.8 6.5 1.5 0.2 — — 9.6 — — — — — 9.5 9.5 — — — — — HA178L10PA HA178L10A HA178L10UA Min Typ 10 80 30 26 18 8.5 — — 3.1 — — 54 –0.2 Max 10.4 230 170 — 90 45 10.5 10.5 6.5 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 12.5 V ≤ VIN ≤ 25 V 13 V ≤ VIN ≤ 25 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 12.5 V ≤ VIN ≤ 25 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 16 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 13 V ≤ VIN ≤ 25 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 13 V ≤ VIN < 24 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C HA178L12 (VIN = 19 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L12P HA178L12 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 11.22 — — — — — Output voltage VOUT 11.04 11.04 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 12 120 100 28.5 20 10 — — 3.1 — — 52 –0.3 Max 12.78 250 200 — 100 50 12.96 12.96 6.5 1.5 0.2 — — HA178L12PA HA178L12A HA178L12UA Min 11.5 — — — — — 11.4 11.4 — — — — — Typ 12 120 100 28.5 20 10 — — 3.1 — — 52 –0.3 Max 12.5 250 200 — 100 50 12.6 12.6 6.5 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 14.5 V ≤ VIN ≤ 27 V 16 V ≤ VIN ≤ 27 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 14.5 V ≤ VIN ≤ 27 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 19 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 16 V ≤ VIN ≤ 27 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 15 V ≤ VIN < 25 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 9 of 15 HA178L00 Series HA178L15 (VIN = 23 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 µF, COUT = 0.1 µF) HA178L15P HA178L15 Item Output voltage Line regulation Load regulation Symbol VOUT ∆VOLINE ∆VOLOAD Min 14.03 — — — — — Output voltage VOUT 13.8 13.8 Quiescent current Quiescent current change Ripple rejection ratio Temperature coefficient of output voltage Dropout voltage IQ ∆I Q RREJ ∆VOUT/∆Tj — — — — — Typ 15 130 110 36 25 12 — — 3.2 — — 49 –0.5 Max 15.97 300 250 — 150 75 16.2 16.2 6.5 1.5 0.2 — — HA178L15PA HA178L15A HA178L15UA Min 14.4 — — — — — 14.25 14.25 — — — — — Typ 15 130 110 36 25 12 — — 3.2 — — 49 –0.5 Max 15.6 300 250 — 150 75 15.75 15.75 6.5 1.5 0.1 — — dB mV/°C mA mA V mV Tj = 25°C Unit V mV Tj = 25°C Tj = 25°C 17.5 V ≤ VIN ≤ 30 V 20 V ≤ VIN ≤ 30 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA 17.5 V ≤ VIN ≤ 30 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 23 V, 1.0 mA ≤ IOUT ≤ 70 mA Tj= 25°C 20 V ≤ VIN ≤ 30 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 18.5 V ≤ VIN < 28.5 V, Tj = 25°C IOUT = 5 mA Test Conditions VDROP — 1.7 — — 1.7 — V Tj = 25°C REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 10 of 15 HA178L00 Series Characteristic Curves Output Voltage vs. Junction Temperature HA178L15 15.2 VIN = 23 V IOUT = 5 mA 15 Output Voltage VOUT (V) Voltage Drop vs. Junction Temperature HA178L05 VOUT = 5 V IOUT = 40 mA Voltage Drop VDrop (V) 14.8 5.05 5.0 4.95 2.55 2.5 2.45 –40–25 0 25 50 75 100 125 150 HA178L02 VIN = 10 V IOUT = 5 mA HA178L05 VIN = 10 V IOUT = 5 mA 2.0 1.5 1.0 –40–25 0 25 50 75 100 125 150 Junction Temperature Tj (°C) Output Voltage vs. Input Voltage (1) 2.48V 6 Output Voltage VOUT (V) Output Voltage VOUT (V) Junction Temperature Tj (°C) Output Voltage vs. Input Voltage (2) 2 5V 4 1 HA178L02 VOUT = 2.48 V RL = 62 Ω Tj = 25°C 2 6.8V 4.9V HA178L05 VOUT = 5 V RL = 125 Ω Tj = 25°C 10 0 5 Input Voltage VIN (V) 10 0 0 2 6 4 8 Input Voltage VIN (V) REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 11 of 15 HA178L00 Series Output Voltage vs. Input Voltage (3) Quiescent Current vs. Input Voltage (1) 15 15V 4 17.2V Quiescent Current IQ (mA) Output Voltage VOUT (V) 10 6.8V 3 2 5 HA178L15 VOUT = 15 V RL = 375 Ω Tj = 25°C 5 10 15 20 1 HA178L02 VOUT = 2.48 V IOUT = 40 mA Tj = 25°C 20 10 Input Voltage VIN (V) 30 0 0 Input Voltage VIN (V) Quiescent Current vs. Input Voltage (2) Quiescent Current vs. Input Voltage (3) 4 Quiescent Current IQ (mA) 4 Quiescent Current IQ (mA) 3 3 2 2 1 HA178L05 VOUT = 5 V IOUT = 40 mA Tj = 25°C 20 10 Input Voltage VIN (V) 30 1 HA178L15 VOUT = 15 V IOUT = 40 mA Tj = 25°C 20 10 Input Voltage VIN (V) 30 0 0 REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 12 of 15 HA178L00 Series Output Voltage vs. Output Current HA178L05 VIN = 10 V VOUT = 5 V Tj = 25°C Quiescent Current vs. Junction Temperature (1) 6 Output Voltage VOUT (V) 5 4 Tj = 75°C Tj = 25°C Tj = 0°C 3 2 1 0 Quiescent Current IQ (mA) 3.5 Tj = 125°C 3.0 HA178L02 VIN = 10 V VOUT = 2.48 V IOUT = 40 mA 0 50 100 150 200 250 300 2.5 –40–25 0 25 50 75 100 125 150 Output Current IOUT (mA) Quiescent Current vs. Junction Temperature (2) Junction Temperature Tj (°C) Quiescent Current vs. Junction Temperature (3) Quiescent Current IQ (mA) 3.5 3.0 2.5 –40–25 Quiescent Current IQ (mA) HA178L05 VIN = 10 V VOUT = 5 V IOUT = 40 mA 3.5 HA178L15 VIN = 23 V VOUT = 15 V IOUT = 40 mA 3.0 0 25 50 75 100 125 150 2.5 –40–25 0 25 50 75 100 125 150 Junction Temperature Tj (°C) Junction Temperature Tj (°C) REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 13 of 15 HA178L00 Series Ripple Rejection Ratio vs. Frequency (1) 70 Ripple Rejection Ratio Rrej (dB) 60 50 40 30 20 10 0 10 HA178L02 VIN = 10 V VOUT = 2.48 V Tj = 25°C 100 1k 10 k 100 k Ripple Rejection Ratio Rrej (dB) 70 60 50 40 30 20 10 0 10 Ripple Rejection Ratio vs. Frequency (2) HA178L05 VIN = 10 V VOUT = 5 V IOUT = 40 mA Tj = 25°C 100 1k 10 k 100 k Frequency f (Hz) Frequency f (Hz) Ripple Rejection Ratio vs. Frequency (3) 70 Ripple Rejection Ratio Rrej (dB) 60 50 40 30 20 10 0 10 HA178L15 VIN = 23 V VOUT = 15 V IOUT = 40 mA Tj = 25°C 100 1k 10 k 100 k Hysteresis Voltage VH (V) 3 Hysteresis Voltage vs. Output Voltage Output Voltage VO (V) HA178L02 2 VH Input Voltage VIN (V) Tj = 25°C 1 L05 L56 L06 L08 L09 L10 L12 0 5 10 15 L15 Frequency f (Hz) Output Voltage VO (V) REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 14 of 15 HA178L00 Series Package Dimensions Package Name TO-92 Mod JEITA Package Code SC-51 RENESAS Code PRSS0003DC-A Previous Code TO-92 Mod / TO-92 ModV MASS[Typ.] 0.35g Unit: mm 4.8 ± 0.4 3.8 ± 0.4 0.65 ± 0.1 0.75 Max 0.55 Max 0.60 Max 2.3 Max 0.7 10.1 Min 8.0 ± 0.5 0.5 Max 1.27 2.54 Package Name UPAK JEITA Package Code SC-62 RENESAS Code PLZZ0004CA-A Previous Code UPAK / UPAKV MASS[Typ.] 0.050g Unit: mm 4.5 ± 0.1 1.5 1.5 3.0 REJ03D0683-0300 Rev.3.00 Oct 24, 2007 Page 15 of 15 0.8 Min 0.44 Max (0.4) 0.53 Max 0.48 Max (2.5) φ1 2.5 ± 0.1 4.25 Max 0.4 1.8 Max 1.5 ± 0.1 0.44 Max (1.5) (0.2) Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: (408) 382-7500, Fax: (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: (1628) 585-100, Fax: (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: (21) 5877-1818, Fax: (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2265-6688, Fax: 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: (2) 2715-2888, Fax: (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: 6213-0200, Fax: 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: (2) 796-3115, Fax: (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: 7955-9390, Fax: 7955-9510 © 2007. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.0