ICS672M-01

DATASHEET ICS672-01/02 QUADRACLOCK QUADRATURE DELAY BUFFER Description Features The ICS672-01/02 are zero delay buffers that generate four output clocks whose phases are spaced at 90° intervals. Based on IDT’s proprietary low jitter Phase-Locked Loop (PLL) techniques, each device provides five low-skew outputs, with clock rates up to 84 MHz for the ICS672-01 and up to 135 MHz for the ICS672-02. By providing outputs delayed one quarter clock cycle, the device is useful for systems requiring early or late clocks. The ICS672-01/02 include multiplier selections of x0.5, x1, x2, x3, x4, x5, or x6. They also offer a mode to power-down all internal circuitry and tri-state the outputs. In normal operation, output clock FBCLK is tied to the FBIN pin. • Packaged in 16-pin SOIC • Available in Pb (lead) free package • Input clock range from 5 MHz to 150 MHz (depends on multiplier) • Clock outputs from up to 84 MHz (ICS672-01) and up to 135 MHz (ICS672-02) • Zero input-output delay • Integrated x0.5, x1, x2, x3, x4, x5, or x6 selections • Four accurate ( 60 MHz. Note 5: Rising edge of ICLK compared with rising edge of CLk0, with FBCLK connected to FBIN, 15 pF load on CLK0, and CLK0 > 60 MHz. Note 6: Commercial grade. Note 7: Industrial grade. Thermal Characteristics Parameter Symbol Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case Conditions Typ. Max. Units θJA Still air 120 ° C/W θJA 1 m/s air flow 115 ° C/W θJA 3 m/s air flow 105 ° C/W 58 ° C/W θJC IDT™ / ICS™ QUADRACLOCK QUADRATURE DELAY BUFFER Min. 5 ICS672-01/02 REV J 110409 ICS672-01/02 QUADRACLOCK QUADRATURE DELAY BUFFER ZERO DELAY BUFFER Package Outline and Package Dimensions (16-pin SOIC, 150 Mil. Narrow Body) Package dimensions are kept current with JEDEC Publication No. 95 Millimeters 16 Symbol E Min A A1 B C D E e H h L α H INDEX AREA 1 2 D A Inches Max Min 1.35 1.75 0.10 0.25 0.33 0.51 0.19 0.25 9.80 10.00 3.80 4.00 1.27 BASIC 5.80 6.20 0.25 0.50 0.40 1.27 0° 8° Max .0532 .0688 .0040 .0098 .013 .020 .0075 .0098 .3859 .3937 .1497 .1574 0.050 BASIC .2284 .2440 .010 .020 .016 .050 0° 8° h x 45 A1 C -Ce B SEATING PLANE L .10 (.004) IDT™ / ICS™ QUADRACLOCK QUADRATURE DELAY BUFFER C 6 ICS672-01/02 REV J 110409 ICS672-01/02 QUADRACLOCK QUADRATURE DELAY BUFFER ZERO DELAY BUFFER Ordering Information Part / Order Number Marking Shipping Packaging Package Temperature 672M-01* 672M-01T* 672M-01LF 672M-01LFT 672M-02* 672M-02T* 672M-02LF 672M-02LFT 672M-02I* 672M-02IT* 672M-02ILF 672M-02ILFT ICS672M-01 ICS672M-01 ICS672M-01LF ICS672M-01LF ICS672M-02 ICS672M-02 ICS672M-02LF ICS672M-02LF ICS672M-02I ICS672M-02I 672M-02ILF 672M-02ILF Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 “LF” denotes Pb (lead) free package. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT™ / ICS™ QUADRACLOCK QUADRATURE DELAY BUFFER 7 ICS672-01/02 REV J 110409 ICS672-01/02 QUADRACLOCK QUADRATURE DELAY BUFFER ZERO DELAY BUFFER Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales For Tech Support 800-345-7015 408-284-8200 Fax: 408-284-2775 www.idt.com/go/clockhelp Corporate Headquarters Integrated Device Technology, Inc. www.idt.com © 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA