DATASHEET
ISL35111
FN6975
Rev 2.00
Jul 12, 2012
11.1Gb/s Driver
The ISL35111 is a de-emphasis driver with extended
functionality for advanced protocols operating with line rates
up to 11.1Gbps such as 10G Ethernet. The ISL35111 is a
high-speed driver/limiting amplifier with built-in de-emphasis
to drive twin-axial copper cables and compensate for the
frequency dependent attenuation of PCB traces, such as the
SFI channel in the 10G SFP+ specification (SFF-8431).
Features
Used in conjunction with Intersil’s ISL36111 receive-side
equalizer, ISL35111 enables active copper cable assemblies
that support 10G serial data transmission over >15m of
twin-axial copper cables.
• Single channel driver in a 3mmx3mm QFN package for
straight route-through architecture and simplified routing
Operating on a single 1.2V power supply, the ISL35111
enables channel throughputs of 10Gbps to 11.1Gbps while
supporting lower data rates including 8.5, 6.25, 5, 4.25, 3.125,
2.5 and 1Gb/s. The ISL35111 uses current mode logic (CML)
input/output and is packaged in a 3mmx3mm 16 lead QFN.
• 1.2V supply voltage
• Supports data rates up to 11.1Gbps
• Low power (85mW typical)
• Low latency (
很抱歉,暂时无法提供与“ISL35111DRZ-T7”相匹配的价格&库存,您可以联系我们找货
免费人工找货