RJK1526DPJ

RJK1526DPJ, RJK1526DPE, RJK1526DPF Silicon N Channel MOS FET High Speed Power Switching REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Features • Low on-resistance RDS(on) = 0.036 Ω typ. (at ID = 25 A, VGS = 10 V, Ta = 25°C) • Low leakage current • High speed switching Outline RENESAS Package code: PRSS0004AE-A (Package name: LDPAK(L) 4 : PRSS0004AE-B LDPAK(S)-(1) 4 : PRSS0004AE-C LDPAK(S)-(2) ) 4 D G 1 1 2 3 1 1. Gate 2. Drain 3. Source 4. Drain S 2 3 2 3 RJK1526DPJ RJK1526DPE RJK1526DPF Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Body-drain diode reverse drain peak current Avalanche current Avalanche energy Channel dissipation Channel to case thermal impedance Channel temperature Storage temperature Notes: 1. PW ≤ 10 μs, duty cycle ≤ 1% 2. Value at Tc = 25°C 3. STch = 25°C, Tch ≤ 150°C Symbol VDSS VGSS ID ID (pulse)Note1 IDR IDR (pulse)Note1 IAPNote3 EARNote3 Pch Note2 θch-c Tch Tstg Ratings 150 ±30 50 120 50 120 25 46.8 100 1.25 150 –55 to +150 Unit V V A A A A A mJ W °C/W °C °C REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 1 of 7 RJK1526DPJ, RJK1526DPE, RJK1526DPF Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Zero gate voltage drain current Gate to source leak current Gate to source cutoff voltage Static drain to source on state resistance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate to source charge Gate to drain charge Body-drain diode forward voltage Body-drain diode reverse recovery time Notes: 4. Pulse test Symbol V(BR)DSS IDSS IGSS VGS(off) RDS(on) Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VDF trr Min 150 — — 3.0 — — — — — — — — — — — — — Typ — — — — 0.036 1800 380 56 35 141 86 15 46 12 21 1.0 120 Max — 1 ±0.1 4.5 0.042 — — — — — — — — — — 1.5 — Unit V μA μA V Ω pF pF pF ns ns ns ns nC nC nC V ns Test conditions ID = 10 mA, VGS = 0 VDS = 150 V, VGS = 0 VGS = ±30 V, VDS = 0 VDS = 10 V, ID = 1 mA ID = 25 A, VGS = 10 V Note4 VDS = 25 V VGS = 0 f = 1 MHz ID = 25 A VGS = 10 V RL = 3 Ω Rg = 10 Ω VDD = 120 V VGS = 10 V ID = 50 A IF = 50 A, VGS = 0 Note4 IF = 50 A, VGS = 0 diF/dt = 100 A/μs REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 2 of 7 RJK1526DPJ, RJK1526DPE, RJK1526DPF Main Characteristics Maximum Safe Operation Area 1000 100 Typical Output Characteristics 8.5 V 9V 80 10 V 60 Pulse Test Ta = 25°C 8V Drain Current ID (A) Drain Current ID (A) 100 PW 10 = 10 0 7.5V 7V μs 10 Operation in this area is limited by RDS(on) μs 6.5 V 6V 1 40 0.1 Tc = 25°C 1 shot 0.01 0.1 1 20 5.5 V VGS = 5 V 0 10 100 1000 0 4 8 12 16 20 Drain to Source Voltage VDS (V) Drain to Source Voltage VDS (V) Static Drain to Source on State Resistance vs. Drain Current (Typical) Typical Transfer Characteristics Drain to Source on State Resistance RDS(on) (mΩ) 100 Drain Current ID (A) 80 Tc = −25°C 25°C 1000 VGS = 10 V Ta = 25°C Pulse Test 75°C 60 100 40 20 VDS = 10 V Pulse Test 0 2 4 6 8 10 10 10 100 1000 Gate to Source Voltage VGS (V) Static Drain to Source on State Resistance vs. Temperature (Typical) VGS = 10 V Pulse Test 0.08 ID = 50 A 0.06 10 A 25 A Drain Current ID (A) Static Drain to Source on State Resistance RDS(on) (Ω) Body-Drain Diode Reverse Recovery Time (Typical) Reverse Recovery Time trr (ns) 0.10 1000 100 0.04 0.02 di / dt = 100 A / μs VGS = 0, Ta = 25°C 10 1 10 100 1000 0 -25 0 25 50 75 100 125 150 Case Temperature Tc (°C) Reverse Drain Current IDR (A) REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 3 of 7 RJK1526DPJ, RJK1526DPE, RJK1526DPF Typical Capacitance vs. Drain to Source Voltage Ta = 25°C Ciss 1000 Dynamic Input Characteristics (Typical) Drain to Source Voltage VDS (V) ID = 50 A Ta = 25 °C VGS 180 VDS VDD = 120 V 60 V 30 V 12 Coss 100 Crss VGS = 0 f = 1 MHz 0 20 40 60 80 100 120 8 60 VDD = 120 V 60 V 30 V 0 20 40 60 80 4 10 0 0 100 Drain to Source Voltage VDS (V) Gate Charge Qg (nC) 100 Gate to Source Cutoff Voltage VGS(off) (V) Reverse Drain Current vs. Source to Drain Voltage (Typical) Reverse Drain Current IDR (A) VGS = 0 V Ta = 25 °C Pulse Test Gate to Source Cutoff Voltage vs. Case Temperature (Typical) 5 VDS = 10 V 80 4 60 3 ID = 10 mA 1 mA 0.1 mA 40 20 0 0 0.4 0.8 1.2 1.6 2.0 2 1 0 -25 0 25 50 75 100 125 150 Source to Drain Voltage VSD (V) Case Temperature Tc (°C) REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 4 of 7 Gate to Source Voltage VGS (V) 10000 240 16 Capacitance C (pF) RJK1526DPJ, RJK1526DPE, RJK1526DPF Normalized Transient Thermal Impedance vs. Pulse Width 3 Normalized Transient Thermal Impedance γ s (t) Tc = 25°C 1 D=1 0.5 0.3 0.2 0.1 0.1 0.05 θch – c(t) = γs (t) • θch – c θch – c = 1.25°C/W, Tc = 25°C PDM PW T 0.03 0.02 1 e 0.0 puls t ho 1s 100 μ 1m 10 m Pulse Width D= PW T 0.01 10 μ 100 m PW (s) 1 10 Switching Time Test Circuit Vin Monitor D.U.T. RL 10 Ω Vin 10 V V DD = 75 V Vin Vout 10% 10% Vout Monitor Waveform 90% 10% 90% td(off) tf 90% td(on) tr REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 5 of 7 RJK1526DPJ, RJK1526DPE, RJK1526DPF Package Dimensions • RJK1526DPJ Package Name LDPAK(L) JEITA Package Code ⎯ RENESAS Code PRSS0004AE-A Previous Code LDPAK(L) / LDPAK(L)V MASS[Typ.] 1.40g Unit: mm (1.4) 4.44 ± 0.2 10.2 ± 0.3 1.3 ± 0.15 11.3 ± 0.5 0.3 10.0 + 0.5 – 8.6 ± 0.3 1.3 ± 0.2 1.37 ± 0.2 0.76 ± 0.1 2.54 ± 0.5 2.54 ± 0.5 11.0 ± 0.5 0.2 0.86 + 0.1 – 2.49 ± 0.2 0.4 ± 0.1 • RJK1526DPE Package Name LDPAK(S)-(1) JEITA Package Code SC-83 RENESAS Code PRSS0004AE-B Previous Code LDPAK(S)-(1) / LDPAK(S)-(1)V MASS[Typ.] 1.30g Unit: mm 4.44 ± 0.2 10.2 ± 0.3 (1.4) 8.6 ± 0.3 + 0.3 – 0.5 10.0 (1.5) (1.5) 2.49 ± 0.2 0.2 0.1 + 0.1 – 7.8 7.0 2.2 1.37 ± 0.2 1.3 ± 0.2 2.54 ± 0.5 0.3 3.0 + 0.5 – 0.2 0.86 + 0.1 – 0.4 ± 0.1 2.54 ± 0.5 REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 6 of 7 1.7 1.3 ± 0.15 7.8 6.6 RJK1526DPJ, RJK1526DPE, RJK1526DPF • RJK1526DPF Package Name LDPAK(S)-(2) JEITA Package Code ⎯ RENESAS Code PRSS0004AE-C Previous Code LDPAK(S)-(2) / LDPAK(S)-(2)V MASS[Typ.] 1.35g Unit: mm 4.44 ± 0.2 10.2 ± 0.3 (1.4) 8.6 ± 0.3 + 0.3 – 0.5 2.49 ± 0.2 10.0 (1.5) (2.3) 0.2 0.1 + 0.1 – 7.8 7.0 2.2 1.37 ± 0.2 1.3 ± 0.2 2.54 ± 0.5 0.4 ± 0.1 0.3 5.0 + 0.5 – 0.2 0.86 + 0.1 – 2.54 ± 0.5 Ordering Information Part Name RJK1526DPE-J3 Quantity 1000 pcs Taping Shipping Container REJ03G1859-0100 Rev.1.00 Nov 06, 2009 Page 7 of 7 1.7 1.3 ± 0.15 7.8 6.6 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: (408) 382-7500, Fax: (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: (1628) 585-100, Fax: (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: (21) 5877-1818, Fax: (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2265-6688, Fax: 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: (2) 2715-2888, Fax: (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: 6213-0200, Fax: 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: (2) 796-3115, Fax: (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: 7955-9390, Fax: 7955-9510 © 2009. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2