HM2B120W-10R-J-250

HIGH POWER WIRE WOUND RESISTOR HM Series: Metal-Clad, High Wattage FEATURES • Non-Flammable • High Wattage • Metal-Clad PART NUMBER EXAMPLE HM 2 A 80W-10R-J-250 Series Mounting Slots Type Wattage Wire Length (mm) Tolerance J=5%, K=10% Resistance A Type Low profile B Type Narrow base H (14AWG) Mounting Slot E = 5.2mm SPECIFICATIONS Part # Watts 60 80 100 120 150 200 300 400 500 600 800 1,000 1,000 A+2 B+2 115 140 165 190 215 165 215 265 240 335 400 400 400 100 125 150 175 200 150 200 250 225 320 385 385 385 Type A Type B C+1 D+1 F+1 G+2 H+1 C+1 D+1 F+1 G+2 H+1 20 40 75 40 20 80 20 40 100 40 20 105 ÿ° 20 40 45° 125 40 20 130 20 40 150 60 30 65 ÿ° 20 40 175 40 20 68° 180 30 60 130 60 30 115 30 60 180 60 30 165 30 60 230 60 30 215 ° 195 ° 200 40 80 60ÿ° 80 40 75ÿ° ÿ° 30 60 300 60 30 68° 285 ÿ° 40 80 355 80 40 75° 360 ° 360 50 100 345 50 100 78ÿ° ÿ° 50 100 345 80 50 100 78° 360 30 Resistance Range ¿ 0.1 ~ 10k 0.1 ~ 10k 0.1 ~ 10k 0.15 ~ 15k 0.15 ~ 15k 0.3 ~ 20k 0.5 ~ 30k 0.5 ~ 30k 0.5 ~ 30k 1 ~ 50k 1 ~ 50k 1 ~ 100k 1 ~ 100k C2E04 REV 2007.04.12 HM1_ HM2_ RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com H HIGH POWER WIRE WOUND RESISTOR HM Series: Metal-Clad, High Wattage ELECTRICAL SPECIFICATION Characteristics Resistance and Tolerance Resistance nominal 1 R Limits Resistance Tolerance ±5% (J) ±10% (K) Temperature coefficient Power rating load Short-time overload Insulation resistance Dielectric withstanding voltage ±200ppm/°C max. R/R