RUP15100-10

Preliminary GaN-SiC Broadband Amplifier Product Features • Solid-state linear amplifier design • GaN on SiC HEMT • Small and light weight • Wide Band Operation 500~2500MHz • 50 Ohm Input/Output impedance matched • Highly reliable and rugged design • Harsh environmental condition • High efficiency • 50W typical Psat RUP15100-10 Application • Broadband communication • Broadcasting • General purpose RF amplifier • Linear applications in the L/S Frequency Bands Description The RUP15050-10 is designed for RF system application frequencies from 500MHz to 2.5GHz. This Pallet Amplifier uses GaN on SiC HEMT technology which performs high breakdown voltage, high linearity, wide bandwidth and high efficiency. Electrical Specifications @ VDD=+28VDC, T=25°C, 50Ω System PARAMETER Frequency Range Output Power CW Output Power @ P3dB G.C.P Small Signal Gain Small Signal Gain Flatness Input VSWR Harmonics @ P1dB G.C.P Spurious Signals Operating Voltage Supply Current @ Pout = 50W CW Supply Current @ Pout = 25W CW Symbol BW Psat P3dB SSG ΔG S11 H Spur VDC IDD IDD Min 500 70 50 10.5 Typ Max 2500 Unit MHz Watt Watt 100 63 11.5 ± 1.5 2.0:1 12.5 ± 2.0 2.5:1 -10 -70 -60 30 10.0 7.0 dB dB dBc dBc Volt Amp Amp 27 28 9.0 6.0 * Please DO NOT ENTER RF INPUT POWER OVER +43dBm. (to prevent the main from damaging) Environmental Characteristics PARAMETER Operating Case Temperature Storage Temperature Symbol Tc Ts Min 0 -40 Typ Max +70 +85 Unit °C °C Mechanical Specifications PARAMETER Dimensions ( L x W x H ) RF Connectors In/Out Cooling Value 107.0 x 50.0 x 5.8 SMA Female External Heat sink + airflow Units mm Limits Max ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 0.1 Preliminary GaN-SiC Broadband Amplifier Interface Connectors Pin # 1 2,3 4 +Vdd Vgs GND Description RUP15100-10 Specifications +28 Drain to Source Voltage Gate to Source Voltage Ground Outline Drawing 6- 3 THRU RF_OUT +Vds -Vgs1 -Vgs2 GND RF_IN RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 0.1