FSDM-6

FSDM Series FAST / TTL Buffered Single Output Delay Lines 14-Pin Package Commercial and Mil-Grade Versions FAST/TTL Logic Buffered Operating Temperature Ranges 0OC to +70OC, or -55OC to +125OC 8-pin DIP/SMD Versions: FAMDL Series 14-pin DIP/SMD Versions: FAIDL Series Electrical Specifications at 25OC 14 Pin DIL TTL Buffered Delay Triple Independent Delays Tolerance Commercial MIL-Grade (ns) Part Number Part Number FSDM-5 FSDM3-5M 5 ± 1.00 FSDM-6 FSDM3-6M 6 ± 1.00 FSDM-7 FSDM3-7M 7 ± 1.00 FSDM-8 FSDM3-8M 8 ± 1.00 FSDM-9 FSDM3-9M 9 ± 1.00 FSDM-10 FSDM3-10M 10 ± 1.50 FSDM-15 FSDM3-15M 15 ± 2.00 FSDM-20 FSDM3-20M 20 ± 2.00 FSDM-25 FSDM3-25M 25 ± 2.00 FSDM-30 FSDM3-30M 30 ± 2.00 FSDM-35 FSDM3-35M 35 ± 2.00 FSDM-40 FSDM3-40M 40 ± 2.00 FSDM-50 FSDM3-50M 50 ± 2.50 FSDM-60 FSDM3-60M 60 ± 3.00 FSDM-70 FSDM3-70M 70 ± 3.50 FSDM-75 FSDM3-75M 75 ± 3.75 FSDM-80 FSDM3-80M 80 ± 4.00 FSDM-100 FSDM3-100M 100 ± 5.0 FSDM-125 FSDM3-125M 125 ± 6.25 FSDM-250 FSDM3-250M 250 ± 12.5 FSDM-500 FSDM3-500M 500 ± 25.0 FSDM-1000 FSDM3-1000 1000 ± 50.0 FSDM 14-Pin Schematic Vcc 14 OUT 8 1 IN 7 GND TEST CONDITIONS -- FAST / TTL VCC Supply Voltage ................................................ 5.00VDC Input Pulse Voltage ................................................... 3.20V Input Pulse Rise Time ....................................... 3.0 ns max. Input Pulse Width / Period ........................... 1000 / 2000 ns 1. Measurements made at 25OC 2. Delay Times measured at 1.50V level of leading edge. 3. Rise Times measured from 0.75V to 2.40V. 4. 10pf probe and fixture load on output under test. Dimensions in Inches (mm) Commercial Grade 14-Pin Package with Unused Leads Removed as per Schematic. (For Mil-Grade FSDM3 the Height is 0.335") .810 (20.57) MAX. .400 (10.16) MAX. OPERATING SPECIFICATIONS VCC Supply Voltage ................................... 5.00 ± 0.25 VDC ICC Supply Current ......................... 25 mA typ, 48 mA max. Logic “1” Input: VIH ........................ 2.00 V min., 5.50 V max. IIH ............................... 20 µA max. @ 2.70V Logic “0” Input: VIL .......................................... 0.80 V max. IIL ............................................ -0.6 mA mA VOH Logic “1” Voltage Out .................................. 2.40 V min. VOL Logic “0” Voltage Out ............................... 0.50 V max. PWI Input Pulse Width ............................. 40% of Delay min. Operating Temperature Range ............................ 0O to 70OC Storage Temperature Range ...................... -65O to +150OC .245 .275 (6.22) (6.99) TYP. MAX. .120 (3.05) MIN. .050 (1.27) TYP. .020 (0.51) TYP. .010 (0.25) TYP. .300 (7.62) .600 (15.24) TYP. P/N Description FSDM - XXX X MIL-GRADE: FSDM3 Military Grade delay lines use integrated circuits screened to MIL-STD-883B with an operating temperature range of -55 to +125OC. These devices have a package height of .335" Buffered Triple Delays: 14-pin Com'l: FSDM 14-pin MIL: FSDM3 Total Delay in nanoseconds (ns) Temp. Range Blank = Commercial M = Mil-Grade Examples: FSDM-25 = 25ns Delay 74F, 14-Pin Thru-hole FSDM3-50M = 50ns Delay 74F, 14-Pin, Mil-Grade Auto-Insertable DIP and Surface Mount Versions: Refer to FAIDL Series, same 14-pin footprint. For space saving, refer to FAMDL 8-pin Series FSDM 9901 Specifications subject to change without notice. For other values & Custom Designs, contact factory. Rhombus Industries Inc. 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: sales@rhombus-ind.com