SIP4-251

SIP4 Series 5-Tap High Performance Passive Delay Modules Fast Rise Time, Low DCR High Bandwidth 5 Equal Delay Taps Standard Impedances: 50 - 75 - 100 - 200 Ω Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC 0.35 / tr Low Distortion LC Network Operating Specifications - Passive Delay Lines Pulse Overshoot (Pos) .................................... 5% to 10%, typical Pulse Distortion (S) ...................................................... 3% typical Working Voltage ............................................. 25 VDC maximum Dielectric Strength .......................................... 100VDC minimum Insulation Resistance ......................... 1,000 MΩ min. @ 100VDC Temperature Coefficient ............................... 100 ppm/ OC, typical Bandwidth (fC) ....................................................... 0.35/tr approx. Operating Temperature Range ............................ -55O to +125OC Storage Temperature Range ............................... -65 O to +150OC Low-profile DIP/SMD versions refer to AMZ Series !!! Electrical Specifications at 25OC Delay Tolerances Total (ns) Tap-to-Tap (ns) 50 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 75 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 100 Ohm Part Number Rise Time (ns) DCR max. (Ohms) 200 Ohm Part Number Rise Time (ns) DCR max. (Ohms) SIP4-55 5 ± 0.5 1.0 ± 0.4 10 ± 1.0 2.0 ± 0.5 SIP4-105 15 ± 1.0 3.0 ± 0.6 SIP4-155 20 ± 1.0 4.0 ± 0.8 SIP4-205 25 ± 1.25 5.0 ± 1.0 SIP4-255 30 ± 1.5 6.0 ± 1.5 SIP4-305 35 ± 1.75 7.0 ± 1.5 SIP4-355 40 ± 2.0 8.0 ± 2.0 SIP4-405 45 ± 2.25 9.0 ± 2.0 SIP4-455 50 ± 2.5 10.0 ± 2.0 SIP4-505 75 ± 3.75 15.0 ± 3.5 SIP4-755 100 ± 5.0 20.0 ± 4.0 SIP4-1005 2.0 4.0 5.5 6.4 8.0 9.0 10.0 11.0 12.0 14.0 23.0 33.0 0.7 0.7 1.0 1.2 1.3 1.6 1.7 1.9 2.0 2.1 2.2 2.4 SIP4-57 SIP4-107 SIP4-157 SIP4-207 SIP4-257 SIP4-307 SIP4-357 SIP4-407 SIP4-457 SIP4-507 SIP4-757 SIP4-1007 2.7 4.4 5.8 7.3 8.0 8.5 12.3 15.5 16.2 17.8 25.7 34.0 0.8 1.3 1.6 1.7 1.9 2.2 2.5 2.7 2.8 2.9 3.3 3.6 SIP4-51 SIP4-101 SIP4-151 SIP4-201 SIP4-251 SIP4-301 SIP4-351 SIP4-401 SIP4-451 SIP4-501 SIP4-751 SIP4-1001 3.0 4.6 5.8 7.5 8.0 8.5 12.7 15.5 16.5 18.0 26.0 34.0 0.8 1.3 1.6 1.7 1.9 2.2 2.5 2.8 3.0 3.1 3.4 3.7 SIP4-52 SIP4-102 SIP4-152 SIP4-202 SIP4-252 SIP4-302 SIP4-352 SIP4-402 SIP4-452 SIP4-502 − − 3.0 6.3 7.7 9.8 15.5 16.0 17.0 17.0 18.0 19.0 − − 0.9 1.5 2.0 2.2 2.4 2.8 3.1 3.4 3.7 4.0 − − 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% points of leading edge. 3. Output (100% Tap) terminated to ground through RL=ZO 5-Tap SIP4 Style Schematic 1 COM 2 IN 3 20% 4 40% 5 60% 6 7 80% 100% Dimensions in inches (mm) .800 (20.32) MAX. .275 (6.99) MAX. .030 (0.76) TYP. .020 (0.51) TYP. Specifications subject to change without notice. .200 (5.08) MAX. .010 (0.25) TYP. . .100 (2.54) TYP. .120 (3.05) MIN. For other values & Custom Designs, contact factory. SIP4 9901 Rhombus Industries Inc. 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: sales@rhombus-ind.com