SP24-602

SP24 Series 20-Tap High Performance Passive Delay Modules Fast Rise Time, Low DCR High Bandwidth 0.35 / tr Low Distortion LC Network 20 Equal Delay Taps Standard Impedances: 50 - 75 - 100 - 200 Ω Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC Operating Specifications - Passive Delay Lines Pulse Overshoot (Pos) .................................... 5% to 10%, typical Pulse Distortion (S) ...................................................... 3% typical Working Voltage ............................................. 25 VDC maximum Dielectric Strength .......................................... 100VDC minimum Insulation Resistance ......................... 1,000 MΩ min. @ 100VDC Temperature Coefficient ................................. 70 ppm/OC, typical Bandwidth (fC) ....................................................... 0.35/tr approx. Operating Temperature Range ............................ -55O to +125OC Storage Temperature Range ............................... -65 O to +150OC Electrical Specifications 1, 2, 3 at 25OC Total (ns) Tap-to-Tap (ns) 50 Ohm Part Number Note: For SMD Package Add "G" to end of P/N in Table Below Rise Time max. (ns) DCR max. (Ohms) 75 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 100 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 200 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 10 ± 0.50 20 ± 1.00 25 ± 1.25 30 ± 1.50 40 ± 2.00 50 ± 2.50 60 ± 3.00 70 ± 3.50 75 ± 3.75 80 ± 4.00 100 ± 5.00 150 ± 7.50 200 ± 10.0 250 ± 12.5 300 ± 15.0 0.5 ± 0.2 1.0 ± 0.4 1.25 ± 0.5 1.5 ± 0.5 2.0 ± 0.5 2.5 ± 0.5 3.0 ± 0.6 3.5 ± 0.8 3.75 ± 0.8 4.0 ± 1.0 5.0 ± 1.0 7.5 ± 2.0 10.0 ± 2.0 12.5 ± 3.0 15.0 ± 3.0 SP24-105 SP24-205 SP24-255 SP24-305 SP24-405 SP24-505 SP24-605 SP24-705 SP24-755 SP24-805 SP24-1005 SP24-1505 SP24-2005 SP24-2505 SP24-3005 2.5 3.7 4.0 4.8 5.5 6.0 7.0 7.9 8.7 9.4 11.8 15.5 20.0 26.0 32.0 1.0 1.7 1.8 1.9 2.1 2.2 2.4 2.6 2.6 2.8 3.0 3.4 3.6 3.8 4.4 SP24-107 SP24-207 SP24-257 SP24-307 SP24-407 SP24-507 SP24-607 SP24-707 SP24-757 SP24-807 SP24-1007 SP24-1507 SP24-2007 SP24-2507 SP24-3007 2.5 3.7 4.0 4.8 5.5 6.0 7.0 7.9 8.8 9.4 12.2 15.8 20.6 26.9 32.4 1.0 1.7 1.8 1.9 2.1 2.2 2.4 2.6 2.6 2.8 3.2 3.4 3.6 3.8 4.4 SP24-101 SP24-201 SP24-251 SP24-301 SP24-401 SP24-501 SP24-601 SP24-701 SP24-751 SP24-801 SP24-1001 SP24-1501 SP24-2001 SP24-2501 SP24-3001 2.8 3.7 4.0 4.8 5.5 6.2 7.1 8.1 8.8 9.5 12.8 16.0 21.0 28.0 32.5 1.3 1.8 2.1 2.3 2.4 2.6 2.7 2.8 2.9 3.0 3.3 3.7 4.1 4.4 5.2 SP24-102 SP24-202 SP24-252 SP24-302 SP24-402 SP24-502 SP24-602 SP24-702 SP24-752 SP24-802 SP24-1002 SP24-1502 SP24-2002 SP24-2502 SP24-3002 3.5 4.0 4.5 5.0 7.5 9.0 10.0 11.0 11.5 12.0 15.0 23.0 31.0 38.0 46.0 2.5 3.9 4.4 4.8 5.0 5.2 5.3 5.4 5.5 5.7 6.0 7.0 8.1 9.2 9.9 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% points of leading edge. 3. Output (100% Tap) terminated to ground through RL=ZO Dimensions in Inches (mm) SP24 Style 20-Tap Schematic COM 100% 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% 24 23 22 21 20 19 18 17 16 15 14 13 Default Thru-hole 24-Pin Package. Example: SP24-105 1.270 (32.30) MAX. .590 (14.99) MAX. .020 .295 (0.51) (7.49) TYP. MAX. .120 (3.05) MIN. .010 (0.25) TYP. 1 N/C 2 IN 3 4 5 6 7 8 9 10 11 12 5% 10% 15% 20% 25% 30% 35% 40% 45% COM .018 (0.46) TYP. .040 (1.02) TYP. .100 (2.54) TYP. .600 (15.24) 1.270 (32.30) MAX. .590 (14.99) MAX. Alternate Pinout, Similar 20 Tap Electricals, refer to Series SP24A Also, for same 24-Pin package and Single Output refer to Series SP241 .018 (0.46) TYP. .295 (7.49) MAX. .040 (1.02) TYP. .100 (2.54) TYP. .022 (0.56) TYP. .080 (2.03) .737 (18.72) .010 (0.25) TYP. Gull wing SMD Package Add suffix "G" to P/N. Example: SP24-105G Specifications subject to change without notice. For other values & Custom Designs, contact factory. SP24 9901 Rhombus Industries Inc. 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: sales@rhombus-ind.com