SP24L1505

SP24L Series 24-Pin Single Output Passive Delay Modules Optimized for Fastest Rise times and Lowest DCR in single configuration Fast Rise Time, Low DCR Better than 10/1 Td/tr typical High Bandwidth 0.35 / tr Low Distortion LC Network Standard Impedances: 50 - 75 - 100 Ω Stable Delay vs. Temperature: 100 ppm/ OC Operating Temperature Range -55 OC to +125OC Electrical Specifications 1, 2, 3 at 25OC Delay (ns) 50 Ohm Part Number Operating Specifications - Passive Delay Lines Pulse Overshoot (Pos) ................................... 5% to 10%, typical Pulse Distortion (S) ..................................................... 3% typical Working Voltage .............................................. 25 VDC maximum Dielectric Strength ........................................... 100VDC minimum Insulation Resistance ........................ 1,000 MΩ min. @ 100VDC Temperature Coefficient ................................. 70 ppm/OC, typical Bandwidth (fC) ....................................................... 0.35/tr approx. Operating Temperature Range ............................. -55O to +125OC Storage Temperature Range ................................ -65O to +150OC Note: For SMD Package Add "G" to end of P/N in Table Below DCR max. (Ohms) 75 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 100 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) Rise Time max. (ns) 50 ± 2.50 75 ± 3.75 100 ± 5.00 150 ± 7.50 200 ± 10.0 250 ± 12.5 300 ± 15.0 400 ± 20.0 500 ± 25.0 750 ± 37.5 1000 ± 50.0 1200 ± 60.0 SP24L-505 SP24L-755 SP24L1005 SP24L1505 SP24L2005 SP24L2505 SP24L3005 SP24L4005 SP24L5005 SP24L7505 SP24L10005 SP24L12005 5.2 7.1 9.2 13.8 16.5 22.0 22.4 34.0 42.0 69.0 94.0 110.0 1.5 1.9 2.4 2.5 2.6 2.9 3.1 3.8 4.8 6.4 7.2 8.3 SP24L-507 SP24L-757 SP24L1007 SP24L1507 SP24L2007 SP24L2507 SP24L3007 SP24L4007 SP24L5007 SP24L7507 SP24L10007 SP24L12007 5.2 7.1 9.3 14.0 16.5 22.0 22.6 35.0 42.0 69.0 94.0 111.0 1.8 2.2 2.6 2.7 2.9 3.4 3.7 4.8 5.8 7.1 8.8 9.8 SP24L-501 SP24L-751 SP24L1001 SP24L1501 SP24L2001 SP24L2501 SP24L3001 SP24L4001 SP24L5001 SP24L7501 SP24L10001 SP24L12001 5.2 7.3 9.4 14.0 16.5 22.0 22.8 36.0 42.0 69.0 94.0 112.0 2.0 2.3 2.6 2.7 2.9 3.5 3.9 4.9 6.2 7.2 9.6 10.4 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% points of leading edge. 3. Output (100% Tap) terminated to ground through RL=ZO SP24L Style Single Output Schematic COM OUT 24 23 22 21 20 19 18 17 16 15 14 13 Dimensions in Inches (mm) Default Thru-hole 24-Pin Package Example: SP24L1001 1.270 (32.30) MAX. .590 (14.99) MAX. .020 .295 (0.51) (7.49) TYP. MAX. 1 N/C 2 IN 3 4 5 6 7 8 9 10 11 12 COM .120 (3.05) MIN. .010 (0.25) TYP. .018 (0.46) TYP. .040 (1.02) TYP. .100 (2.54) TYP. .600 (15.24) For similar package, alternate schematic style with only one common connection (pin 24 = N/C) at pin 12, refer to Series SP241 For 20 Tap versions in the same 24-Pin package, refer to Series SP24A & SP24A .018 (0.46) TYP. 1.270 (32.30) MAX. .590 (14.99) MAX. .295 (7.49) MAX. .040 (1.02) TYP. .100 (2.54) TYP. .022 (0.56) TYP. .080 (2.03) .737 (18.72) .010 (0.25) TYP. Gull wing SMD Package Add suffix "G" to P/N. Example: SP24L1001G 6SHFLILFDWLRQV VXEMHFW WR FKDQJH ZLWKRXW QRWLFH www.rhombus-ind.com UKRPEXV LQGXVWULHV LQF )RU RWKHU YDOXHV &XVWRP 'HVLJQV FRQWDFW IDFWRU\ sales@rhombus-ind.com 13 TEL: (714) 898-0960 FAX: (714) 896-0971 SP24L 2001-01