CAR0603-47KB1

CAR Series Thin Film Precision Chip Resistor • • • • • • Resistances from 1 Ohm to 3M Ohms Power Rating 0.06 to 0.75 Watt Resistance Tolerances to ± 0.01% TCR’s to ±1 ppm/°C Sizes: 0402 /0603 / 0805 / 1206 / 2010 / 2512 Operating Temperature: -55°C to 155°C SPECIFICATIONS - STANDARD / HIGH POWER (HP) Package Size Power Rating (W) at 70°C MAX Operating Voltage1 MAX Overload Voltage2 Resistance Range (E24/E96)* ±0.01% ±0.05% ±0.1% ±0.25% ±0.5% 49.9Ω - 4.99KΩ - 49.9Ω - 20KΩ 0402 0.0625 25V 50V - 49.9Ω - 69.8KΩ 49.9Ω - 12KΩ 10Ω - 511KΩ 0.0625 50V 100V - 4.7Ω - 332KΩ - ±1, ±2, ±3 ±5 4.7Ω - 511KΩ 4.7Ω - 1MΩ 0.100 75V ±25, ±50 - ±1, ±2 ±3 24.9Ω - 15KΩ 150V 24.9Ω - 100KΩ ±5 4.7Ω - 332KΩ 4.7Ω - 332KΩ 0.100 100V 200V ±10, ±15 4.7Ω - 1MΩ 24.9Ω - 30KΩ 0805 ±10, ±15 1Ω - 1MΩ 24.9Ω - 15KΩ 0603 HP ±25, ±50 - 24.9Ω - 150KΩ 24.9Ω - 200KΩ - 4.7Ω - 2MΩ ±10, ±15 1Ω - 2MΩ ±25, ±50 - ±1, ±2, ±3 24.9Ω - 30KΩ 24.9Ω - 30KΩ 0805 HP 0.125 150V 300V ±5 4.7Ω - 511KΩ 24.9Ω - 200KΩ 4.7Ω - 511KΩ ±10 4.7Ω - 1MΩ 4.7Ω - 1MΩ 24.9Ω - 49.9KΩ ±15 1Ω - 1MΩ ±25, ±50 - ±1, ±2, ±3 24.9Ω - 300KΩ 1206 0.125 150V 300V 24.9Ω - 499KΩ - 4.7Ω 2.49MΩ 24.9Ω - 49.9KΩ 1206 HP 0.250 200V 400V Operating Voltage = Riedon Inc. © Riedon, Inc. (P*R) ±10, ±15 1Ω - 2.49MΩ ±25, ±50 - ±1, ±2, ±3 24.9Ω - 49.9KΩ 24.9Ω - 499KΩ 1 ±5 4.7Ω - 1.5MΩ 4.7Ω - 1MΩ or MAX Listed, whichever is lower. | 2 ±1, ±2, ±3 ±5 4.7Ω - 1MΩ 4.7Ω - 1MΩ ±15 ±25. ±50 24.9Ω - 60KΩ 24.9Ω - 100KΩ ±10 4.7Ω - 511KΩ 24.9Ω - 15KΩ 0603 ±1, ±2, ±3 ±5 49.9Ω - 100KΩ 49.9Ω - 20KΩ ±1% TCR PPM/°C 4.7Ω - 1MΩ ±5 ±10, ±15, ±25, ±50 Overload Voltage = 2.5 * ( P * R ) or MAX Listed, whichever is lower. | * E24/E96 Consult Factory for available values 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com sales@riedon.com (626) 284-1704 Revised: 201804_003 CAR Series Thin Film Precision Chip Resistor SPECIFICATIONS - STANDARD / HIGH POWER (HP) continued Power Rating (W) at 70°C Package Size MAX Operating Voltage1 MAX Overload Voltage2 Resistance Range (E24/E96)* ±0.01% ±0.05% ±0.1% ±0.25% 24.9Ω - 100KΩ 2010 0.250 150V 300V 200V ±5 4.7Ω - 1MΩ 4.7Ω - 1MΩ 4.7Ω - 3MΩ 400V 150V 300V 1 0.750 Operating Voltage = (P*R) 200V 400V ±25, ±50 - ±1, ±2, ±3 ±5 ±10, ±15, ±25, ±50 - ±1, ±2, ±3 24.9Ω - 300KΩ 24.9Ω - 499KΩ - 2512 HP 1Ω - 3MΩ 4.7Ω - 1MΩ 24.9Ω - 100KΩ 0.500 ±10, ±15 24.9Ω - 49.9KΩ 24.9Ω - 499KΩ 2512 ±1, ±2, ±3 24.9Ω - 300KΩ 24.9Ω - 49.9KΩ 0.333 ±1% - 24.9Ω - 499KΩ - 2010 HP ±0.5% TCR PPM/°C 4.7Ω - 1MΩ 4.7Ω - 1MΩ 24.9Ω - 2KΩ or MAX Listed, whichever is lower. | 2 ±5 4.7Ω - 3MΩ 4.7Ω - 2KΩ ±10, ±15 1Ω - 3MΩ ±25, ±50 1Ω - 2KΩ ±10, ±15, ±25, ±50 Overload Voltage = 2.5 * ( P * R ) or MAX Listed, whichever is lower. | * E24/E96 Consult Factory for available values Environmental Characteristics Requirement Test Tol. < 0.05% TCR Tol. >0.05% As Spec. Short Time Overload ΔR±0.05% +25/-55/+25/+125/+25°C ΔR±0.2% ΔR±0.2% for high power rating Insulation Resistance >1000 MΩ ΔR±0.05% Load Life ΔR±0.5% for high power rating Bending Strength Solderability Terminal Finish = Nickel Tin ΔR±0.05% ΔR±0.3% ΔR±0.5% for high power rating ΔR±0.05% RCWV*2.5 or Max. overload voltage for 5 seconds Apply 100VDC for 1 minute ΔR±0.2% >7kΩ ΔR±0.5% Damp Heat with Load Conditions ΔR±0.2% 95% min. coverage 70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” 40±2°C, 90~95% R.H. Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” Bending amplitude 3 mm for 10 seconds 245±5°C for 3 seconds Resistance to Soldering Heat ΔR±0.05% ΔR±0.2% 260±5°C for 10 seconds Thermal Shock ΔR±0.05% ΔR±0.25% -55°C~150°C, 100 cycles ΔR±0.05% ΔR±0.2% Low Temperature Operation Terminal Finish Riedon Inc. © Riedon, Inc. ΔR±0.5% for high power rating 1 hour, -65°C, followed by 45 minutes of RCWV Tin/Nickel 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com sales@riedon.com (626) 284-1704 Revised: 201804_003 CAR Series Thin Film Precision Chip Resistor Pow er Derating Curve 100 80 60 40 20 0 0 20 40 60 70 80 100 120 140 155 Am bient Tem perature (°C) Dimensions (mm) Type L B D C Mass (grams/1k) CAR0402 1.00 ± 0.05 0.50 ± 0.05 0.30 ± 0.05 0.20 ± 0.10 0.54 CAR0603 1.55 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 1.83 CAR0805 2.00 ± 0.15 1.25 ± 0.15 0.55 ± 0.10 0.30 ± 0.20 4.71 CAR1206 3.05 ± 0.15 1.55 ± 0.15 0.55 ± 0.10 0.42 ± 0.20 9.02 CAR2010 4.90 ± 0.15 2.40 ± 0.15 0.55 ± 0.10 0.60 ± 0.30 23.61 CAR2512 6.30 ± 0.15 3.10 ± 0.15 0.55 ± 0.10 0.6 ± 0.30 38.06 Recommended Land Pattern (mm) C B A Type A B C CAR0402 0.50 0.50 0.60 ± 0.2 CAR0603 0.80 0.80 0.90 ± 0.2 CAR0805 1.00 1.00 1.35 ± 0.2 CAR1206 2.00 1.15 1.70 ± 0.2 CAR2010 3.60 1.40 2.50 ± 0.2 CAR2512 4.90 1.60 3.10 ± 0.2 Ordering Information Part Description: Part Type - Package Size- Resistance - Tolerance - TCR - HP option Example: CAR0402 50 Ohms 0.05% 25ppm HP (Note: if no TCR is specified: The highest value will be supplied) Riedon Inc. © Riedon, Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com sales@riedon.com (626) 284-1704 Revised: 201804_003