HVS1206-10MJ1

HVS Series High Voltage / High Temperature Thick Film Chip Resistors • • • • • • • • Resistances from 100k to 10T Ohms Power Rating 0.125 to 1.5 Watt Resistance Tolerances to ± 0.25% TCR to ±25 ppm/°C Non-Magnetic (contact PtAg) High Value Thick Film Resistance Element Sizes: 0805 / 1206 / 1210 / 2010 / 2512 / 4020 Special HT Version to 300°C SPECIFICATIONS Type 0805⁴ 1206 1210 2010 2512 4020 Power Rating - P70 ( W @ 70°C) 0.125 0.25 0.35 0.5 1.0 1.5 Trimmed 200 600 800 1500 2000 4000 Untrimmed (> 5%) 400 1000 1200 2000 3000 6000 Working Voltage ( VAC ) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C ) Voltage Coefficients Available ( ppm / V ) Resistance Range (W) 100k - 100M 0.5% to 10% 25 / 50 / 100 100ppm/V 0.5% to 10% 25 / 50 / 100 50ppm/V 0.5% to 10% 25 / 50 / 100 50ppm/V 0.5% to 10% 25 / 50 / 100 25ppm/V 0.5% to 10% 25 / 50 / 100 10ppm/V 0.25% to 10% 25 / 50 / 100 5ppm/V >100M - 1G 2% to 20% 50 / 100 / 250 250ppm/V 2% to 20% 50 / 100 / 250 100ppm/V 1% to 20% 25 / 50 / 100 50ppm/V 1% to 20% 25 / 50 / 100 50ppm/V 1% to 20% 25 / 50 / 100 25ppm/V 0.5% to 20% 25 / 50 / 100 10ppm/V >1G - 10G 5% to 20% 250 / 500 500ppm/V 5% to 20% 50 / 100 / 250 250ppm/V 2% to 20% 25 / 50 / 100 100ppm/V 2% to 20% 25 / 50 / 100 100ppm/V 2% to 20% 25 / 50 / 100 50ppm/V 1% to 20% 25 / 50 / 100 10ppm/V >10G - 100G 10% to 30% 2000 2000ppm/V 10% to 30% 250 / 500 / 1000 1000ppm/V 5% to 30% 250 / 500 / 1000 500ppm/V 5% to 30% 100 / 250 / 500 500ppm/V 5% to 30% 100 / 250 / 500 100ppm/V 2% to 30% 100 / 250 / 500 50ppm/V >100G - 1T 20% to 30% 2000 5000ppm/V 10% to 30% 1000 / 2000 2000ppm/V 5% to 30% 1000 / 2000 1000ppm/V 5% to 30% 500 / 1000 1000ppm/V 5% to 30% 250 / 500 500ppm/V 5% to 30% 250 / 500 250ppm/V >1T - 10T - 20% to 30% TCR / VCR on request 20% to 30% TCR / VCR on request 20% to 30% TCR / VCR on request 10% to 30% TCR / VCR on request 10% to 30% TCR / VCR on request 1) Solder pads must have sufficient heat conduction 2) TCR in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C 3) VCR: typical values, all negative, not for all TCR values available 4) Best tolerance for High Temp version is 2% Riedon Inc. © Riedon, Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com sales@riedon.com (626) 284-1704 Revised: 202103_001 HVS Series High Voltage / High Temperature Thick Film Chip Resistors SPECIFICATIONS Temperature Range -55°C to +155°C (Standard) -55°C to +300°C (HT Version, TCR valid +25°C to +125°C ) Climactic Cetegory 55 / 155 / 56 Solderability 250°C / 3s (up to 6 month after shipment resp. at storage in Nitrogen) Max. Soldering Temperature 260°C / 10s Max DR Long Term Stability 10 GW Load Life 70°C / 1000h / P70 ±0.25% ±0.5% ±1% Storage 125°C / 1000h ±0.5% ±1% ±2% Maximum Voltage / 1000h ±0.5% ±1% ±2% Power Derating Curve 120 80 HT n ard 40 sio nd r Ve 60 20 0 Packaging: Bulk or Tape & Reel per IEC 286-3 / EIA 481-1-A Tape width 8mm / Reel Diameter 180 or 330mm Sta Power ( % ) 100 0 50 100 150 200 250 300 350 Ambient Temperature (°C) DIMENSIONS in [mm] Type L B D C HVS 0805 0.080 +0.006 / -0.002 [ 2.0 +0.15 / -0.05 ] 0.050 +0.006 / -0.002 [ 1.25 +0.15 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] HVS 1206 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.060 +0.008 / -0.002 [ 1.5 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] HVS 1210 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.098 +0.008 / -0.002 [ 2.5 +0.2 / -0.05 ] 0.020 +0.006 / -0.002 [ 0.5 +0.15 / -0.05 ] 0.032 ±0.008 [ 0.8 ±0.2 ] HVS 2010 0.20 +0.008 / -0.002 [5.1 +0.2 / -0.05] 0.098 +0.008 / -0.002 [ 2.5 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.05 ±0.008 [ 1.2 ±0.2 ] HVS 2512 0.250 +0.006 / -0.002 [ 6.3 +0.15 / -0.05 ] 0.138 +0.008 / -0.002 [ 3.5 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.035 ±0.008 [ 0.9 ±0.2 ] HVS 4020 0.40 +0.006 / -0.002 [ 10.20 +0.15 / -0.05 ] 0.20 +0.008 / -0.002 [ 5.1 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.035 ±0.008 [ 0.9 ±0.2 ] ORDERING INFORMATION HVS0805 10M 1% 50PPM HT HT (high temp) TYPE omit for standard temperature 0805, 1206, 1210, 2010, 2512, 4020 size Resistance any value between 100K and 10T ohm 100K to 1T ohm (0805) TCR see table on first page and note below 0.5% to 10% tolerance - see table on first page 100 piece minimum per value for bulk packaging or 500 pieces per value for Tape & Reel | If no TCR is specified, the highest value will be supplied Riedon Inc. © Riedon, Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com sales@riedon.com (626) 284-1704 Revised: 202103_001