BP5512A

Data Sheet 5V/200mA Output Isolated DC/DC converter BP5512A (Ta=25°C) 105 °C Maximum output current Withstand voltage Iomax VI 200 AC2300 mA V Ambient temperature + the module self-heating≤Tcmax 21.4MAX Refer to derating curve ∗1 Between input and output, 1 minute Electrical Characteristics BP5512A 1 2 Vi + 5 7 C2 st GND + Vo (5V/200mA) Pin No. Pin Name 1 Vi 2 GND 3 Non pin 4 Non pin 5 COM 6 Non pin 7 Vo Function Input terminal GND terminal Non pin Non pin Output common terminal Non pin Output terminal COM 0.75±0.1 1.3±0.2 0.5±0.05 11.05MAX. 6.15MAX. (Vi=5V) Output current Io(mA) 300 250 200 150 OPERATION RANGE 100 50 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta(°C) Conversion Efficiency (Vi=5.0V, Ta=25°C) 80 70 60 50 40 30 20 10 0 50 100 150 200 Output Current Io(mA) F1: Fuse Use a fuse for safety. C2: Output capacitor 220μF / 25V Low impedance type for power supply La 220μF / 25V Low impedance type for power supply www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 7 0 External Components Settings C2: Output capacitor 5 Derating Curve Conversion Efficiency η(%) im e BP5512 Use a fuse for safety. C1 Unit Conditions V DC V mA V Vi=4.5 to 6.5V V Io=50 to 200mA mVp-p % T Test Circuit Max. 6.5 5.5 200 0.1 0.2 200 − 2 9.13MAX. 2.54X6=15.24TYP. (Unless otherwise noted, Vi=5.0V, Io=200mA, Ta=25°C) Typ. 5.0 5.0 − 0.05 0.05 50 62 1 P=2.54±0.2 ∗1 The load should be reduced according to the surrounding temperature, input voltage. Parameter Symbol Min. Vi 4.5 Input voltage Vo 4.5 Output voltage Io 0 Output current Vr − Line regulation Vl − Load regulation Vp − Output ripple voltage η 57 Power conversion efficiency 17.2MAX MARKING SIDE Tcmax 28.2MAX B Allowable maximum surface temperature Conditions DC +0.5 Unit V °C °C 3.5 −1.0 Limits Parameter Symbol Input voltage Vi 8 Operating temperature range Topr −20 to +85 Storage temperature range Tstg −40 to +85 Dimensions (Unit : mm) uy Absolute Maximum Ratings 1/1 2012.06 - Rev. A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. B uy The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. e The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. im The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. T Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. st The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. La If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1120A