BU4069UBF-E2

Standard ICs Hex inverter BU4069UB / BU4069UBF / BU4069UBFV The BU4069UB, BU4069UBF and BU4069UBFV are six-circuit inverters with no buffers. A single-stage gate configuration reduces the propagation time. •1)Features Low power dissipation. 2) Wide range of operating power supply voltages. 3) High input impedance. •Logic circuit diagram 4) High fan-out. 5) Direct drive of 2 L-TTL inputs and 1 LS-TTL input. •Block diagram I1 1 14 VDD O1 2 13 I6 I2 3 12 O6 O2 4 11 I5 I3 5 10 O5 O3 6 9 I4 VSS 7 8 O4 VDD IN OUT VSS •Absolute maximum ratings (V Parameter SS = 0V, Ta = 25°C) Symbol Limits Unit Power supply voltage VDD – 0.3 ~ + 18 V Power dissipation Pd 1000 (DIP), 450 (SOP), 350 (SSOP-B14) mW Operating temperature Topr – 40 ~ + 85 °C Storage temperature Tstg – 55 ~ + 150 °C – 0.3 ~ VDD + 0.3 V Input voltage VIN 1 Standard ICs BU4069UB / BU4069UBF / BU4069UBFV characteristics •DCElectrical characteristics (unless otherwise noted, V SS Parameter Input high level voltage Symbol Min. Typ. Max. 4.0 — — VIH 8.0 — — 12.5 — — 15 — — 1.0 5 — 2.0 Input low level voltage VIL — — — 2.5 Input high level current IIH — — Input low level current IIL Output high level voltage Output low level voltage Output high level current Output low level current Static current dissipation 2 = 0V, Ta = 25°C) VOH VOL IOH IOL IDD Unit VDD (V) Conditions Measurement circuit — Fig.1 — Fig.1 5 V 10 V 10 0.3 µA 15 VIH = 15V Fig.1 µA 15 VIL = 0V Fig.1 IO = 0mA Fig.1 IO = 0mA Fig.1 — — – 0.3 4.95 — — 9.95 — — 14.95 — — — — 0.05 — — 0.05 — 15 5 V 10 15 5 V 10 — 0.05 15 – 0.16 — — 5 – 0.4 — — 10 VOH = 9.5V – 1.2 — — 15 VOH = 13.5V 0.44 — — 5 VOL = 0.4V 1.1 — — 10 VOL = 0.5V 3.0 — — 15 VOL = 1.5V — — 1 — — 2 — — 4 mA mA VOH = 4.6V Fig.1 Fig.1 5 µA 10 15 VI = VDD or GND — Standard ICs BU4069UB / BU4069UBF / BU4069UBFV Switching characteristics (unless otherwise noted, Ta = 25°C, VSS = 0V, CL = 50pF) Parameter Output rise time Output fall time “L” to “H” Propagation delay time “H” to “L” Propagation delay time Input capacitance Symbol tTLH tTHL tPLH tPHL CIN Min. Typ. Max. — 180 — — 90 — — 65 — — 100 — — 50 — — 40 — — 90 — — 50 — Unit Measurement circuit Conditions VDD (V) 5 ns 10 — Fig.2 — Fig.2 — Fig.2 — Fig.2 — — 15 5 ns 10 15 5 ns 10 — 40 — 15 — 65 — 5 — 40 — — 30 — — 5 — ns 10 15 pF — •Measurement circuits VDD VDD 20ns 20ns VDD Input A VSS CL P.G. V GND tPHL tPLH VOH GND Output VOL tTHL Fig. 1 DC characteristics tTLH Fig. 2 Switching characteristics 3 Standard ICs BU4069UB / BU4069UBF / BU4069UBFV •Electrical characteristic curve POWER DISSIPATION: Pd (mW) 1200 1000 DIP14 800 600 SOP14 400 SSOP-B14 200 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE: Ta (°C) Fig. 3 Power dissipation vs. Ta •External dimensions (Units: mm) BU4069UB BU4069UBF 8.7 ± 0.2 1 7 1.27 0.4 ± 0.1 0.3Min. 0.5 ± 0.1 0° ~ 15° 2.54 0.15 DIP14 SOP14 BU4069UBFV 14 8 1 7 0.65 0.15 ± 0.1 4.4 ± 0.2 0.1 1.15 ± 0.1 6.4 ± 0.3 5.0 ± 0.2 0.22 ± 0.1 0.3Min. 0.1 SSOP-B14 4 8 0.15 ± 0.1 1.5 ± 0.1 0.3 ± 0.1 14 4.4 ± 0.2 0.51Min. 7 7.62 3.2 ± 0.2 4.25 ± 0.3 1 6.2 ± 0.3 8 0.11 14 6.5 ± 0.3 19.4 ± 0.3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0