KDZ10B

KDZ4.3B Diodes Zener diode KDZ4.3B Applications Voltage regulation Dimensions (Unit : mm) 1.6±0.1 0.1±0.1 　　　 0.05 Land size figure (Unit : mm) 1.2 0.85 Features 1) Small power mold type. (PMDU) 2) High ESD tolerance 2.6±0.1 3.5±0.2 ① PMDU Construction Silicon epitaxial planar 0.9±0.1 Structure 　 0.8±0.1 ROHM : PMDU JEDEC :SOD-123 Manufacture Date EX. KDZ10B Taping dimensions (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 1.75±0.1 0.25±0.05 3.5±0.05 8.0±0.2 1.81±0.1 4.0±0.1 φ1.0±0.1 3.71±0.1 1.5MAX Absolute maximum ratings (Ta=25°C) Parameter Power dissipation Junction temperature Storage temperature Symbol P Tj Tstg Limits 1000 150 -55 to +150 Unit mW ℃ ℃ Rev.B 3.05 1/4 KDZ4.3B Diodes Electrical characteristics (Ta=25°C) Symbol TYP. KDZ 3.6B KDZ 3.9B KDZ 4.3B KDZ 4.7B KDZ 5.1B KDZ 5.6B KDZ 6.2B KDZ 6.8B KDZ 7.5B KDZ 8.2B KDZ 9.1B KDZ 10B KDZ 11B KDZ 12B KDZ 13B KDZ 15B KDZ 16B KDZ 18B KDZ 20B KDZ 22B KDZ 24B KDZ 27B KDZ 30B KDZ 33B KDZ 36B MIN. 3.600 3.900 4.300 4.700 5.100 5.600 6.200 6.800 7.500 8.200 9.100 10.000 11.000 12.000 13.300 14.700 16.200 18.000 20.000 22.000 24.000 27.000 30.000 33.000 36.000 Zener voltage：Vz(V) Reverse current：IR(μA) TYP. 3.813 4.136 4.572 4.924 5.368 5.856 6.509 7.280 7.889 8.655 9.747 10.310 11.510 12.500 13.820 15.350 16.860 19.000 20.820 23.850 25.310 28.700 31.570 34.950 39.240 MAX. 4.000 4.400 4.800 5.200 5.700 6.300 7.000 7.700 8.400 9.300 10.200 11.200 12.300 13.500 15.000 16.500 18.300 20.300 22.400 24.500 27.600 30.800 34.000 37.000 40.000 Iz(mA) 40 40 40 40 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 MAX. 60 40 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 VR(V) 1.0 1.0 1.0 1.0 1.5 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 15.0 17.0 19.0 21.0 23.0 25.0 27.0 (1)The Zener voltage (Vz) is measured 40ms after power is supplied. (2)The operating resistances (Zz､Zzk) are measured by superimposing a minute alternating current on the regulated current (Iz). Marking (TYPE NO.) TYPE KDZ　3.6B KDZ　3.9B KDZ　4.3B KDZ　4.7B KDZ　5.1B KDZ　5.6B KDZ　6.2B KDZ　6.8B KDZ　7.5B KDZ　8.2B KDZ　9.1B KDZ　10B KDZ　11B TYPE　NO. GB HB JB KB LB MB NB PB QB RB SB TB UB TYPE KDZ　12B KDZ　13B KDZ　15B KDZ　16B KDZ　18B KDZ　20B KDZ　22B KDZ　24B KDZ　27B KDZ　30B KDZ　33B KDZ　36B TYPE　NO. VB WB XB YB ZB AD BD CD DD ED FD GD Rev.B 2/4 KDZ4.3B Diodes 100 5.1 4.7 4.3 10 3.9 3.6 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 ZENER CURRENT:Iz(mA) 1 0.1 0.01 0.001 0 5 10 15 20 25 30 35 40 45 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 1200 POWER DISSIPATION:Pd(mW) 1000 800 600 400 200 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta(℃) Pd-Ta　CHARACTERISTICS 0.12 0.1 TEMP.COEFFICIENCE:γz(％/℃) 0.08 0.06 0.04 0.02 0 -0.02 -0.04 -0.06 -0.08 0 10 20 30 ZENER VOLTAGE：Vz(V) γz-Vz CHARACTERISTICS 40 15 10 5 0 -5 40 35 30 25 20 10000 PRSM t REVERSE SURGE MAXIMUM POWER:PRSM(W) 1000 100 10 1 0.001 0.01 0.1 1 10 100 TIME:t(ms) PRSM-TIME CHARACTERISTICS 1000 Mounted on epoxy board IM=10mA IF=100mA TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) TEMP.COEFFICIENCE:γz(mV/℃) 100 1ms time Rth(j-a) 300us 10 Rth(j-c) 1 0.1 0.001 0.01 0.1 1 10 100 1000 TIME:t(s) Rth-t CHARACTERISTICS Rev.B 3/4 KDZ4.3B Diodes Electrical characteristic curves (Ta=25°C) 100 REVERSE CURRENT:IR(nA) Ta=75℃ Ta=125℃ Ta=25℃ 1 Ta=150℃ Ta=-25℃ Ta=150℃ Ta=125℃ Ta=75℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) 10000 f=1MHｚ 1000 100 10 1 ZENER CURRENT:Iz(mA) 10 Ta=25℃ 0.1 0.01 0.001 Ta=-25℃ 1000 0.1 0.01 0.001 1 2 3 4 ZENER VOLTAGE：Vz(V) Vz-Iz CHARACTERISTICS 5 0.0001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 1 100 0 0.2 0.4 0.6 0.8 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 1 4.8 REVERSE CURRENT:IR(nA) 1 Ta=25℃ IZ=40mA n=30pcs 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 AVE:0.0979nA Ta=25℃ VR=1.0V n=30pcs 1300 1250 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 1200 1150 1100 1050 1000 AVE:1164.0pF Ta=25℃ f=1MHz VR=0V n=10pcs ZENER VOLTAGE:Vz(V) 4.7 4.6 4.5 4.4 4.3 AVE:4.572V 0 Vz DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 10000 ELECTROSTATIC DISCHARGE TEST ESD(KV) DYNAMIC IMPEDANCE:Zz(Ω) 30 25 20 15 10 5 No break at 30kV 1000 100 10 0.1 1 ZENER CURRENT:Iz(mA) Zz-Iz CHARACTERISTICS 10 0 C=200pF R=0Ω C=100pF R=1.5kΩ C=150pF R=330Ω ESD DISPERSION MAP Rev.B 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1