MCH032ANN680JK

MCH03 Ceramic capacitors Multi-layer ceramic chip capacitors MCH03 (0603 size, chip capacitor) !External dimensions (Units : mm) !Features 1) Small size (0.6 x 0.3 x 0.3 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic mounting. 3) Precise uniformity of shape and dimensions facilitates highly efficient automatic mounting. 4) Barrier layer and end terminations to improve solderability. 0.1Min. 0.17Min. 0.3±0.03 0.3±0.03 0.3±0.03 0.6±0.03 0.3±0.03 !Structure External electrode ΙΙΙ (coating layer) Internal electrode Ceramic element External electrode ΙΙ (barrier layer) External electrode Ι (thick membrane layer) !Product designation Basic ordening unit (pcs.) Code Product thickness Packaging specifications Reel K 0.3mm Paper tape (width 8 mm, pitch 2 mm) φ180mm (7in.) 15,000 Reel (φ180, φ330mm) : compatible with EIAJ ET-7200A Part No. M C H Rated voltage Code Voltage 2 25V 3 16V 5 50V Packaging style 0 3 2 F N 1 0 3 Z K Nominal Capacitance tolerance Capacitance-temperature characteristics Code Code Operating temperature (°C) Temp. coefficient or percent change capacitance Code tolerance A CG(C0G) 0±30ppm/°C −55~+125 C ± 0.25pF (0.5 ~ 5pF) CN R −55~+125 ±15% D ± 0.5pF (5.1 ~ 10pF) 3-digit designation J ± 5% (11pF or more) B −25~+85 ±10% according to IEC (X7R) (−55~+125) (±15%) K ± 10% FN F −25~+85 +30%,−80% (Y5V) (+22%,−82%) (−30~+85) Z + 80%, −20% ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 1/6 MCH03 Ceramic capacitors !Capacitance range For thermal compensation Part number Capacitance (pF) MCH03 Temperature characteristics Part number A (CG) (C0G) Rated voltage (V) Tolerance Capacitance (pF) 25V Rated voltage (V) Tolerance 0.5 0.75 1 11 12 13 1.1 1.2 1.3 15 16 18 1.5 1.6 1.8 20 22 24 2 2.2 2.4 Temperature characteristics MCH03 A (CG) (C0G) 25V J ( ± 5%) 27 30 33 C ( ± 0.25pF) 2.7 3 3.3 36 39 43 3.6 3.9 4 47 4.3 4.7 5 Product thickness (mm) 0.3±0.03 5.1 5.6 6 6.2 6.8 7 D ( ± 0.5pF) 7.5 8 8.2 9 9.1 10 High dielectric constant Part number Capacitance (pF) MCH03 Temperature characteristics CN (R) (B) (X7R) FN (F) (Y5V) Rated voltage (V) 25V 25V Tolerance K ( ±10%) Z ( +80, −20%) 100 150 200 330 470 680 1,000 1,500 2,200 4,700 10,000 Product thickness (mm) 0.3±0.03 ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 2/6 MCH03 Ceramic capacitors !Characteristics Class 1 (For thermal compensation) Temperature characteristics A (CG) (C0G) Item Operating temperature Test methods/conditions (based on JIS C 5102) −55°C ~ 125°C Nominal capacitance (C) Must be within the specified tolerance range. Based on paragraph 7.8 and paragraph 9 Measured at room temperature and standard humidity, Dissipation factor (tanδ) 100/(400+20C)% or less: Less than 30 pF 0.1% or less : 30 pF or larger 1000pF or less Measurement frequency : 1 ± 0.1MHz Measurement voltage : 1 ± 0.1Vrms. Over 1000pF Measurement frequency : 1 ± 0.1kHz Measurement voltage : 1 ± 0.1Vrms. Insulation resistance (IR) Withstanding voltage Temperature characteristics Terminal adherence Appearance Resistance to vibration Rate of capacitance change Dissipation factor (tanδ) Appearance Rate of capacitance change There must be no mechanical damage. Must be within initial tolerance. Must satisfy initial specified value. 10,000MΩ or 500MΩ ⋅ µF, whichever is smaller The temperature coefficients in table 12, paragraph 7.12 are calculated at 20°C and high temperature. Based on paragraph 8.11. 2. Apply 2N for 10 ± 1s in the direction indicated by the arrow. Chip is mounted to a board in the manner shown on the right, subjected to vibration (type A in paragraph 8.2), and measured 24 ± 2 hrs. later. Pressure (2N) Test board Capacitor Board Based on paragraph 8.13 Soldering temperature : 235 ± 5°C Soldering time : 2 ± 0.5s Based on paragraph 8.14. Soldering temperature : 260 ± 5°C Soldering time : 5 ± 0.5s Preheating : 150 ± 10°C for 1 to 2 min. The insulation must not be damaged. ± 2.5% or ± 0.25 pF, whichever is larger. Must satisfy initial specified value. Insulation resistance 10,000MΩ or 500MΩ ⋅ µF, whichever is smaller Rate of capacitance change Based on paragraph 7.1 Apply 300% of the rated voltage for 1 to 5s then measure. There must be no mechanical damage. Dissipation factor (tanδ) Appearance Based on paragraph 7.6 Measurement is made after rated voltage is applied for 60 ± 5s. There must be no mechanical damage. ± 2.5% or ± 0.25 pF, whichever is larger. Insulation resistance Rate of capacitance change Hightemperature load test No detachment or signs of detachment. Must satisfy initial specified value. Appearance Humidity load test Within 0 ± 30ppm/°C Dissipation factor (tanδ) Withstanding voltage Temperature cycling The insulation must not be damaged. At least 3/4 of the surface of the two terminals must be covered with new solder. Solderability Resistance to soldering heat 10,000MΩ or 500MΩ ⋅ µF, whichever is smaller There must be no mechanical damage. ± 7.5% or ± 0.75 pF, whichever is larger. Dissipation factor (tanδ) 0.5% or less Insulation resistance 500MΩ or 25MΩ ⋅ µF, whichever is smaller Appearance There must be no mechanical damage. Rate of capacitance change ± 3.0% or ± 0.3 pF, whichever is larger. Dissipation factor (tanδ) 0.3% or less Insulation resistance 1,000MΩ or 50MΩ ⋅ µF, whichever is smaller Based on paragraph 9.3 Number of cycles : 5 Capacitance measured after 24 ± 2 hrs. Based on paragraph 9.9 Test temperature : 40 ± 2°C Relative humidity : 90% to 95% Applied voltage : rated voltage Test time : 500 to 524 hrs. Capacitance measured after 24 ± 2 hrs. Based on paragraph 9.10 Test temperature : Max. operating temp. Applied voltage : rated voltage × 200% Test time : 1,000 to 1,048 hrs. Capacitance measured after 24 ± 2 hrs. ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 3/6 MCH03 Ceramic capacitors Class 2 (High dielectric constant) Temperature characteristics CN (R) (B) (X7R) FN (F) (Y5V) −55°C ~ +125°C −30°C ~ +85°C Item Operating temperature Nominal capacitance (C) Dissipation factor (tanδ) Insulation resistance (IR) Withstanding voltage Temperature characteristics Terminal adherence Appearance Resistance to vibration Rate of capacitance change Dissipation factor (tanδ) Solderability Rate of capacitance change Resistance to soldering heat Within ± 15% + 22, + 82% No detachment or signs of detachment There must be no mechanical damage. Must be within initial tolerance. Must satisfy initial specified value. Within ± 5.0% Within ± 20.0% 10,000MΩ or 500MΩ ⋅ µF, whichever is smaller Rate of capacitance change Within ± 7.5% Within ± 20.0% Must satisfy initial specified value. 10,000MΩ or 500MΩ ⋅ µF, whichever is smaller Insulation resistance Appearance Rate of capacitance change Dissipation factor (tanδ) Insulation resistance The temperature coefficients in paragraph 7.12, table 8, condition B, are based on measurements carried out at 20°C, with no voltage applied. Based on paragraph 8. 11. 2. Apply 2N for 10 ± 1s in the direction indicated by the arrow. Pressure (2N) Test board Capacitor Chip is mounted to a board in the manner shown on the right, subjected to vibration (type A in paragraph 8.2), and measured 48 ± 4 hrs. later. Board Based on paragraph 8. 13 Soldering temperature : 235 ± 5°C : 2 ± 0.5s Soldering time Based on paragraph 8. 14. Soldering temperature : 260 ± 5°C Soldering time : 5 ± 0.5s Preheating : 150 ± 10°C for 1 to 2 min. The insulation must not be damaged. Insulation resistance Dissipation factor (tanδ) Based on paragraph 7.1 Apply 250% of the rated voltage for 1 to 5s then measure. There must be no mechanical damage. Dissipation factor (tanδ) Appearance Based on paragraph 7.6 Measurement is made after rated voltage is applied for 60 ± 5s. There must be no mechanical damage. Insulation resistance Rate of capacitance change Hightemperature load test The insulation must not be damaged. Must satisfy initial specified value. Appearance Humidity load test 10,000MΩ or 500MΩ ⋅ µF, whichever is smaller Dissipation factor (tanδ) Withstanding voltage Temperature cycling Based on paragraph 7.8 Measured at room temperature and standard humidity, Measurement frequency: 1 ± 0.1 kHz 2.5% or less 5.0% or less (when rated voltage is 16V: 3.5% or less) (when rated voltage is 16V: 7.5% or less) Measurement voltage : 1.0 ± 0.2 Vrms. Must be within the specified tolerance range. At least 3/4 of the surface of the two terminals must be covered with new solder. Appearance Test methods/conditions (based on JIS C 5102) There must be no mechanical damage. ± 12.5% or less Within ± 30.0% 5.0% or less 7.5% or less (when rated voltage is 16V: 10.0%) 500MΩ or 25MΩ ⋅ µF, whichever is smaller Based on paragraph 9.3 Number of cycles : 5 Capacitance measured after 48 ± 4 hrs. Based on paragraph 9.9 Test temperature : 40 ± 2°C Relative humidity : 90% to 95% Applied voltage : rated voltage Test time : 500 to 524 hrs. Capacitance measured after 48 ± 4 hrs. There must be no mechanical damage. Within ± 10.0% Within ± 30.0% 5.0% or less 7.5% or less (when rated voltage is 16V: 10.0%) Based on paragraph 9.10 Test temperature : Max. operating temp. Applied voltage : rated voltage × 200% Test time : 1,000 to 1,048 hrs. Capacitance measured after 48 ± 4 hrs. 1,000MΩ or 50MΩ ⋅ µF, whichever is smaller ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 4/6 MCH03 Ceramic capacitors !Packaging specifications (Units : mm) Reel φ180 mm plastic reel φJ 9.0 ± 0.3 t A D φ13 ± 0.2 E C B 11.4 ± 1.0 φ 60 + 1 0 0 φ180 −1.5 Taping F t1 H C Symbol D E Label position Pulling direction (Paper taping) F H J t t1 8.0 3.5 1.75 2.0 4.0 φ1.5 0.37 0.5 Dimensions ±0.3 ±0.05 ±0.1 ±0.05 ±0.1 +0.1 ±0.02 MAX. 0 Symbol Size 0603 A B 0.37±0.03 0.67±0.03 ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 5/6 MCH03 Ceramic capacitors !Electrical characteristics gA (C0G) Characteristics 1000000 RATE OF CAPACITANCE CHANGE : (%) 5 4 100000 3 10000 2 1 1000 IMPEDANCE (Ω) 0 −1 −2 −3 −4 −5 −50 0 50 0.5pF 100 10pF 10 1 0.1 100 1 10 100 1000 TEMPERATURE (°C) FREQUENCY (MHz) Fig.1 Capacitance-temperature characteristics Fig.2 Impedance-frequency characteristics 10000 gCN (X7R) Characteristics 1000000 20 100000 10 0 10000 −10 −20 10 5 −80 −40 0 40 80 120 1000 IMPEDANCE (Ω) −30 Dissipation factor (%) CAPACITANCE CHANGE : (%) 30 100 10 0.1 160 1000pF 1 1 10 100 1000 10000 FREQUENCY (MHz) TEMPERATURE : (°C) Fig.4 Impedance-frequency characteristics Fig.3 Capacitance-temperature characteristics 20 10 0 −10 −20 −30 −40 −50 −60 −70 −80 60 50 40 30 20 10 −80 −40 0 40 80 120 Dissipation factor (%) CAPACITANCE CHANGE : (%) gFN (Y5V) Characteristics 160 TEMPERATURE : (°C) Fig.5 Capacitance-temperature characteristics ∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. 6/6