RB550EA_11

Schottky Barrier Diode RB550EA  Applications Low current rectification  Dimensions (Unit : mm)  Land size figure (Unit : mm) 0.8MIN. 2.9±0.1 0.4　－0.05 各リードとも同寸法 Each lead has same (5) (4) ＋0.1 dimension 0.16±0.1 0.06  Features 1)Small mold type.（TSMD5） 2)Low VF, Low IR 3)High reliability (1) 0.95 (2) 0.95 (3) 1.0MIN. 0.45 0.35 2.8±0.2 ＋0.2 －0.1 0.35 0.45 0.6 1.6 0～0.1 0.33±0.03 0.7±0.1 0.85±0.1 1.0Max 0.3～0.6 0.95 0.95 TSMD5 1.9  Construction Silicon Epitaxial Planer 1.9±0.2  Structure ROHM : TSMD5 dot(year week factory) + day  Taping specifications (Unit : mm) 4.0±0.1 2.0±0.05 φ1.55±0.05 0.3±0.1 1.75±0.1 3.5±0.05 3.2±0.08 8.0±0.2 3.2±0.08 4.0±0.1 φ1.1±0.1 0～0.5 5.5±0.2 3.2±0.08 1.1±0.08  Absolute maximum ratings (Ta=25°C) Parameter Symbol VR Reverse voltage (DC) Average rectified forwarfd current (*1) Io IFSM Forward current surge peak (t=1msec) Junction temperature Tj Storage temperature Tstg (*1)Rating of per diode. Limits 30 0.7 12 150 40 to 150 Unit V A A °C °C  Electrical characteristics (Ta=25°C, Rating of per diode.) Parameter Symbol Min. VF 1 Forward voltage 0.39 Reverse current ESD break down voltage IR1 IR2 ESD - Typ. 0.45 1 5.0 - Max. 0.49 30.00 50 - Unit V μA μA KV Conditions IF=0.7A VR=10V VR=30V C=100PF,R=1.5KΩ Forward and reverse : 1 times 15 www.rohm.com ©2011 ROHM Co., Ltd. All rights reserved. 1/3 2011.05 - Rev.A 2.4 RB550EA Data Sheet 1 Ta=75℃ REVERSE CURRENT:IR(uA) Ta=125℃ 100000 Ta=150℃ 10000 1000 100 10 1 0.1 0.01 Ta=-25℃ Ta=75℃ Ta=25℃ Ta=125℃ 1000 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 30 FORWARD CURRENT:IF(mA) 0.1 Ta=150℃ Ta=25℃ Ta=-25℃ 100 0.01 10 0.001 0 100 200 300 400 500 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 600 0 5 10 15 20 25 1 0 5 10 15 20 25 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 30 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 490 FORWARD VOLTAGE:VF(mV) 480 REVERSE CURRENT:IR(nA) Ta=25℃ IF=0.7A n=30pcs 30 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 25 20 15 10 AVE:3.141uA 5 0 Ta=25℃ VR=30V n=30pcs 200 190 180 170 160 150 140 130 120 110 100 IR DISPERSION MAP Ct DISPERSION MAP AVE:149.9pF Ta=25℃ f=1MHz VR=0V n=10pcs 470 460 450 AVE:459.6mV 440 VF DISPERSION MAP 30 REVERSE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) 25 20 15 10 5 0 IFSM DISPERSION MAP AVE:15.1A Ifsm 1cyc 8.3ms 30 25 20 15 10 5 0 trr DISPERSION MAP AVE:8.3ns PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 20 Ifsm Ifsm 15 8.3ms 8.3ms 8.3ms 8.3ms 1cyc 1cyc 10 5 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 30 PEAK SURGE FORWARD CURRENT:IFSM(A) 25 20 15 10 5 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 Ifsm TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) 1000 Mounted on epoxy board IM=10mA IF=0.2A 1 0.8 t 1ms time Rth(j-a) FORWARD POWER DISSIPATION:Pf(W) 300us 0.6 Sin(θ＝180) 0.4 0.2 0 D=1/2 100 Rth(j-c) DC 10 0.001 0.1 10 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 0.5 1 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 1.5 www.rohm.com ©2011 ROHM Co., Ltd. All rights reserved. 2/3 2011.05 - Rev.A RB550EA Data Sheet 1 0.8 REVERSE POWER DISSIPATION:PR (W) 0.6 0.4 0.2 0 0 10 20 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 30 Sin(θ＝180) D=1/2 DC 1.5 DC AVERAGE RECTIFIDE FORWARD CURRENT:Io(A) 0A 0V Io t T VR D=t/T VR=15V Tj=150℃ 1.5 D=1/2 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 1 DC Sin(θ＝180) 1 D=1/2 0.5 Sin(θ＝180) 0.5 0A 0V Io t T VR D=t/T VR=15V Tj=150℃ 75 100 125 150 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 0 0 25 50 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) www.rohm.com ©2011 ROHM Co., Ltd. All rights reserved. 3/3 2011.05 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A