SCS210AMC

SCS210AM Datasheet SiC Schottky Barrier Diode Outline VR 650V IF 10A QC 15nC TO-220FM (2) (1) Features Inner circuit 1) Shorter recovery time 2) Reduced temperature dependence (1) Cathode (2) Anode 3) High-speed switching possible (1) Applications (2) Packaging specifications ・PFC Boost Topology Packaging ・Secondary Side Rectification Reel size (mm) - Tape width (mm) - ・Data Center Tube Type ・PV Power Conditioners Basic ordering unit (pcs) 50 Packing code C Marking SCS210AM Absolute maximum ratings (Tj = 25°C) Parameter Symbol Value Unit Reverse voltage (repetitive peak) VRM 650 V Reverse voltage (DC) VR 650 V IF 10 A 38 A 30 A 150 A 28 *1 A Continuous forward current Surge nonrepetitive forward current (Tc= 85°C) PW=10ms sinusoidal, Tj=25°C PW=10ms sinusoidal, Tj=150°C PW=10s square, Tj=25°C IFRM Repetitive peak forward current 2 PW=10ms, Tj=25°C i t value IFSM ∫i dt 2 PW=10ms, Tj=150°C 2 7.2 As 4.5 A2s Total power dissipation PD 34 *2 W Junction temperature Tj 175 °C Tstg 55 to 175 °C Range of storage temperature *1 Tc=100°C, Tj=150°C, Duty cycle=10% *2 Tc=25°C www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 1/5 TSQ50230-SCS210AM 9.May.2018 - Rev.003 Datasheet SCS210AM Electrical characteristics (Tj = 25°C) Values Parameter Conditions Symbol VDC DC blocking voltage VF Forward voltage IR Reverse current Unit Min. Typ. Max. 650 - - V IF=10A,Tj=25°C - 1.35 1.55 V IF=10A,Tj=150°C - 1.55 - V IF=10A,Tj=175°C - 1.63 - V VR=650V,Tj=25°C - 2 200 A VR=650V,Tj=150°C - 30 - A VR=650V,Tj=175°C - 70 - A VR=1V,f=1MHz - 360 - pF VR=600V,f=1MHz - 37 - pF IR =2.0mA C Total capacitance Total capacitive charge QC VR=400V,di/dt=350A/s - 15 - nC Switching time tC VR=400V,di/dt=350A/s - 15 - ns Symbol Conditions Thermal characteristics Values Parameter Rth(j-c) Thermal resistance Unit - Min. Typ. Max. - 3.6 4.3 °C/W Typical Transient Thermal Characteristics Symbol Value Rth1 7.04E-01 Rth2 1.29E+00 Rth3 1.62E+00 Tj PD Unit K/W Value Cth1 1.89E-03 Cth2 8.38E-03 Cth3 7.07E-01 Rth,n Rth1 Cth1 Symbol Cth2 Unit Ws/K Tc Cth,n Ta www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/5 TSQ50230-SCS210AM 9.May.2018 - Rev.003 Datasheet SCS210AM Electrical characteristic curves Fig.2 VF - IF Characteristics Fig.1 VF - IF Characteristics 100 Pulsed Forward Current : IF [A] Forward Current : IF [A] Ta=25ºC 12 10 1 Ta= 25ºC 0.1 Ta=25ºC Ta=75ºC 0.01 Ta=125ºC Ta=175ºC 0.0 0.5 1.0 1.5 Ta=175ºC 10 Ta=125ºC 8 Ta=75ºC 6 4 　2 0 0.001 2.0 0.0 2.5 Forward Voltage : VF [V] 0.5 1.0 1.5 2.0 2.5 Forward Voltage : VF [V] Fig.3 VR - IR Characteristics Fig.4 VR - Ct Characteristics 1000 Ta=125ºC 100 Ta=75ºC 10 Ta=25ºC 1 0.1 0.01 Ta= 25ºC 0.001 0 200 400 600 Capacitance Between Terminals : Ct [pF] 1000 Ta=175ºC Reverse Current : IR [A] Ta= 25ºC Pulsed 14 Reverse Voltage : VR [V] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 100 10 Ta=25ºC f=1MHz 1 0.01 0.1 1 10 100 1000 Reverse Voltage : VR [V] 3/5 TSQ50230-SCS210AM 9.May.2018 - Rev.003 Datasheet SCS210AM Fig.5 Typical Transient Thermal Resistance vs. Pulse Width Fig.6 Power Dissipation 10 40 Ta=25ºC Single Pulse 35 30 Power Dissipation [W] Transient Thermal Resistance : Rth(j-c) [ºC/W] Electrical characteristic curves 1 0.1 25 20 15 10 5 0.01 1.E-4 1.E-3 1.E-2 1.E-1 1.E+0 1.E+1 1.E+2 1.E+3 0 25 100 125 150 175 Fig.8*4 Typical peak forward current derating curve IP - Tc (Not guaranteed) 70 70 60 60 Peak Forward Current : IP [A] Peak Forward Current : IP [A] Fig.7*3 Maximum peak forward current derating curve IP - Tc 50 Duty=0.1 40 Duty=0.2 30 Duty=0.5 10 Duty=0.8 75 Case Temperature : Tc [ºC] Pulse Width : PW [s] 20 50 Duty=0.1 50 Duty=0.2 40 30 Duty=0.5 20 10 Duty=0.8 D.C. D.C. 0 0 25 50 75 100 125 150 175 25 75 100 125 150 175 Case Temperature : Tc [ºC] *4 Based on typ Vf, typ Rth(j-c) Typical value, not guaranteed Valid for switching of above 10kHz, excluding D.C. curve Case Temperature : Tc [ºC] *3 Based on max Vf, max Rth(j-c) Valid for switching of above 10kHz, excluding D.C. curve. www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 50 4/5 TSQ50230-SCS210AM 9.May.2018 - Rev.003 Datasheet SCS210AM Electrical characteristic curves Fig.10 Typical capacitance store energy 1000 10 Capacitance stored energy : EC[J] Surge non-repetitive forward current : IFSM [A] Fig.9 Surge non-repetitive forward current vs. Pulse width (Sinusoidal waveform) 100 Ta=25ºC Single Pulse 10 1.E-5 9 8 7 6 5 4 3 2 1 0 1.E-4 1.E-3 1.E-2 0 200 Pulse Width : PW [s] 400 600 Reverse Voltage : VR [V] Symplified forward characteristic model Fig.11 Equivalent forward current curve Forward Current : IF VF = Vth + Rdiff IF Vth ( Tj ) = a0 + a1 Tj Rdiff ( Tj ) = b0 + b1 Tj + b2 Tj2 Vth 1/Rdiff Typical Value Unit a0 9.35E-01 V a1 -1.12E-03 V/°C b0 3.98E-02  b1 1.02E-04 /°C b2 1.08E-06 /°C2 Tj in ºC; -55 ºC < Tj < ºC ; IF < 20 A Forward Voltage : VF www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 Symbol 5/5 TSQ50230-SCS210AM 9.May.2018 - Rev.003 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products specified in this document are not designed to be radiation tolerant. 7) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, and power transmission systems. 8) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 10) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 11) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 12) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102S