SCS230KE2HRC11

SCS230KE2HR Automotive Grade SiC Schottky Barrier Diode SiC Schottky Barrier Diode Datasheet lOutline VR 1200V IF 15A/30A* QC 51nC(Per leg) TO-247N (*Per leg/ Both legs) (3) (1) (2) lFeatures lInner circuit 1) AEC-Q101 qualified 2) Low forward voltage (1) Anode (2) Cathode (3) Anode 3) Negligible recovery time/current 4) Temperature independent switching behavior (1) (2) (3) lApplications lPackaging specifications ・ On Board Charger Package TO-247N ・ DC/DC Converter Packing ・ Wireless Charger Reel size (mm) - Tape width (mm) - ・ EV Charger Type Tube Basic ordering unit (pcs) Packing code 30 C11 Marking SCS230KE2 lAbsolute maximum ratings (Tvj = 25°C) Parameter Symbol Value Unit Reverse voltage (repetitive peak) VRM 1200 V Reverse voltage (DC) VR 1200 V IF 15/30 A 62/120 A 46/92 A Continuous forward current Surge nonrepetitive forward current *3 *3 (Tc= 139°C) PW=10ms sinusoidal, Tvj=25°C IFSM PW=10ms sinusoidal, Tvj=150°C PW=10ms square, Tvj=25°C Repetitive peak forward current *3 2 it value *3 PW=10ms, Tvj=25°C A *1 IFRM 67/130 A ∫i dt 19/77 A2s 10/42 A2s 2 PW=10ms, Tvj=150°C 240/480 Total power dissipation *3 PD Virtual Junction temperature Tvj 180/360 *2 175 Tstg Range of storage temperature -55 to +175 *1 Tc=100°C, Tvj=150°C, Duty cycle=10% *2 Tc=25°C *3 Per leg/ Both legs www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 1/8 W °C °C TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR lElectrical characteristics (Tvj = 25°C) (Per Leg) Values Parameter Symbol VDC DC blocking voltage VF Forward voltage IR Reverse current Total capacitance Conditions Unit Min. Typ. Max. 1200 - - V IF=15A,Tvj=25°C - 1.4 1.6 V IF=15A,Tvj=150°C - 1.8 - V IF=15A,Tvj=175°C - 1.9 - V VR=1200V,Tvj=25°C - 15 300 mA VR=1200V,Tvj=150°C - 120 - mA VR=1200V,Tvj=175°C - 195 - mA VR=1V,f=1MHz - 790 - pF VR=600V,f=1MHz - 64 - pF IR =0.3mA C Total capacitive charge QC VR=800V,di/dt=500A/ms - 51 - nC Switching time tC VR=800V,di/dt=500A/ms - 18 - ns Symbol Conditions lThermal characteristics Values Parameter Unit Min. Typ. Max. Per Leg - 0.67 0.81 K/W Both Legs - 0.34 0.41 K/W RthJC Thermal resistance lTypical Transient Thermal Characteristics (Per Leg) Symbol Value Rth1 1.25×10 -1 Rth2 4.03×10 -1 Rth3 1.43×10 -1 Tj PD Unit K/W Value Cth1 3.81×10 -3 Cth2 4.54×10 -3 Cth3 7.59×10 -2 Rth,n Rth1 Cth1 Symbol Cth2 Unit Ws/K Tc Cth,n Ta www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR lElectrical characteristic curves Fig.2 VF - IF Characteristics (Per Leg) Fig.1 VF - IF Characteristics (Per Leg) 100 Tvj= -25ºC Pulsed Pulsed 20 Tvj=25ºC Forward Current : IF [A] Forward Current : IF [A] 10 1 Tvj= -25ºC 0.1 Tvj=25ºC Tvj=75ºC 0.01 Tvj=125ºC 15 Tvj=175ºC Tvj=125ºC 10 Tvj=75ºC 　 5 Tvj=175ºC 0 0.001 0.0 0.5 1.0 1.5 2.0 0.0 2.5 0.5 Forward Voltage : VF [V] 1.5 2.0 2.5 Forward Voltage : VF [V] Fig.3 VR - IR Characteristics (Per Leg) Fig.4 VR - Ct Characteristics (Per Leg) 1000 Tvj=125ºC 100 Tvj=75ºC 10 Tvj=25ºC 1 0.1 0.01 Tvj= -25ºC 0.001 0 500 Capacitance Between Terminals : Ct [pF] 10000 Tvj=175ºC Reverse Current : IR [mA] 1.0 1000 Reverse Voltage : VR [V] www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 1000 100 10 Tvj=25ºC f=1MHz 1 0.01 0.1 1 10 100 1000 Reverse Voltage : VR [V] 3/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR lElectrical characteristic curves 1 Fig.6 Power Dissipation (Per Leg) 200 180 160 Power Dissipation [W] Transient Thermal Impedance : ZthJC [K/W] Fig.5 Typical Transient Thermal Impedance vs. Pulse Width (Per Leg) 0.1 Tc=25ºC Single Pulse 0.01 1.E-4 140 120 100 80 60 40 20 0 1.E-3 1.E-2 1.E-1 1.E+0 1.E+1 25 50 Pulse Width : PW [s] 160 160 Peak Forward Current : IP [A] Peak Forward Current : IP [A] 180 140 120 Duty=0.1 100 Duty=0.2 Duty=0.5 40 20 25 50 75 100 140 120 Duty=0.2 100 80 Duty=0.5 60 40 Duty=0.8 0 125 150 175 25 50 75 100 125 150 175 Case Temperature : Tc [ºC] *5 Based on typ Vf, typ RthJC Typical value, not guaranteed Valid for switching of above 10kHz, excluding D.C. curve Case Temperature : Tc [ºC] *4 Based on max Vf, max RthJC Valid for switching of above 10kHz, excluding D.C. curve. www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 175 D.C. D.C. 0 150 Duty=0.1 20 Duty=0.8 125 Fig.8*4 Typical peak forward current derating curve IP - Tc (Per Leg, Not guaranteed) 180 60 100 Case Temperature : Tc [ºC] Fig.7*3 Maximum peak forward current derating curve IP - Tc (Per Leg) 80 75 4/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR lElectrical characteristic curves Fig.10 Typical capacitance store energy (Per Leg) 30 1000 Capacitance stored energy : EC[mJ] Surge non-repetitive forward current : IFSM [A] Fig.9 Surge non-repetitive forward current vs. Pulse width (Sinusoidal waveform) (Per Leg) 100 Tvj=25ºC Single Pulse 10 0.00001 0.0001 25 20 15 10 5 0 0.001 0 0.01 200 Pulse Width : PW [s] 400 600 800 Reverse Voltage : VR [V] lSymplified forward characteristic model (Per Leg) Fig.11 Equivalent forward current curve VF = Vth + Rdiff IF Forward Current : IF Vth ( Tvj ) = a0 + a1 Tvj Rdiff ( Tvj ) = b0 + b1 Tvj + b2 Tvj2 Symbol Vth 1/Rdiff Unit a0 9.93×10 -1 V a1 -1.27×10 -3 V/°C b0 2.43×10 -2 Ω b1 1.37×10 -4 Ω/°C b2 8.87×10 -7 Ω/°C 2 Tvj in ºC; -55 ºC < Tvj < 175 ºC ; IF < 30 A Forward Voltage : VF www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 Typical Value 5/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR lPackage Dimensions Unit: mm www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 6/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR Unit: mm www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 7/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Datasheet SCS230KE2HR lDie Bonding Layout :Die position ・Front view of the packaging. ・Dimensions are design values. ・If the heat sink is to be installed, it should be in contact with the die bonding point. Unit: mm www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 8/8 TSQ50215-SCS230KE2HR 6.May.2022 - Rev.002 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications. 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products specified in this document are not designed to be radiation tolerant. 7) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, and power transmission systems. 8) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 10) ROHM has used reasonable care to ensure the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 11) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 12) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1107 S Datasheet General Precaution 1. Before you use our Products, you are requested to carefully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or concerning such information. Notice – WE © 2015 ROHM Co., Ltd. All rights reserved. Rev.001