SIM-012SBT97

SIM-012SB High power Chip IR LED, side view type SIM-012SB The SIM-012SB is ultra small size and high power ohip sensor. Original technology, original structure and original Optical design enable to use Automatic moantinig machine, Reflow, ultra smallsize, High power. Applications Optical control equipment Light source for remote control devices Dimensions (Unit : mm) Note) 1.Unspecified tolerance shall be + − 0.2. 2.Dimension in parenthesis are show for reference. Features 1) High power by 2 lenze. 2) Emitting pore can have 7time high power then substruk type with parabola structure. 3) Ultra -compact surface mount package. (3mmx3mmx2mm) 4) It is possible to do Reflow. 0.25 1 2 2 2-0.4 3 0.8 (1.15) 2 3 R1 Internal connection diagram 2 1 Absolute maximum ratings (Ta=25C) Parameter Symbol Limits Unit IF 40 mA Forward current Reverse voltage VR 5 V Power dissipation PD 60 mW Pulse forward current IFP∗ 0.5 A Operating temperature Topr −30~+85 °C Storage temperature Tstg −40~+100 °C ∗ Pulse width=0.1msec, duty ratio 1% Electrical and optical characteristics (Ta=25C) Parameter Symbol Min. Typ. Max. Unit Conditions Optical output PO − 3.5 − mW IF=20mA Emitting strength IE 0.9 − 7.1 mW/sr IF=20mA Forward voltage VF − 1.2 1.5 V IF=20mA Reverse current IR − − 10 μA VR=3V Peak light emitting wavelength λP − 950 − nm IF=20mA Spectral line half width Δλ − 40 − nm IF=20mA Half-viewing angle θ1 / 2 − ±12 − deg IF=20mA Pesponse time tr·tf − 1.0 − μs IF=20mA fC − 1.0 − MHz IF=20mA Cut-off frequency www.rohm.com c 2010 ROHM Co., Ltd. All rights reserved. ○ 1/2 2010.12 - Rev.B SIM-012SB Data Sheet Electrical and optical characteristic curves 8 50 40 30 20 10 0 −20 0 20 40 60 80 25°C 50°C 30 75°C 20 10 0 0 1 2 6 4 2 0 0 10 20 30 AMBIENT TEMPERATURE : Ta (°C) FORWARD VOLTAGE : VF (V) FORWARD CURRENT : IF (mA) Fig.1 Forward current faloff Fig.2 Forward current vs. forward voltage Fig.3 Emitting strength vs. forward current 40 RELATIVE OPTICAL OUTPUT : PO (%) 100 100 10 −50 −25 0 25 50 80 60 40 20 0 900 100 75 920 940 960 980 AMBIENT TEMPERATURE : Ta (°C) OPTICAL WAVELENGTH : λ (nm) Fig.4 Relative emitting strength vs.ambient temperature Fig.5 Wavelength 100 − 90 0 100 + RELATIVE EMITTING STRENGTH (%) RELATIVE EMITTING STRENGTH : IE (%) −25°C 0°C 40 100 1000 RELATIVE EMITTING STRENGTH (%) EMITTING STRENGTH : IE (mW/sr) FORWARD CURRENT : IF (mA) FORWARD CURRENT : IF (mA) 50 80 70 60 50 40 30 20 10 0 −90 −60 −30 0 30 60 90 ANGULAR DISPLACEMENT : θ (deg) Fig.6 Directional pattern(1) www.rohm.com c 2010 ROHM Co., Ltd. All rights reserved. ○ − 0 90 1000 + 80 70 60 50 40 30 20 10 0 −90 −60 −30 0 30 60 90 ANGULAR DISPLACEMENT : θ (deg) Fig.7 Directional pattern(2) 2/2 2010.12 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A