SML-512PW

0603 High Brightness Type SML-51 Emitting Color Material Package Size(mm) Series Green(Yellowish Green) Yellow AlGaInP on GaAs Orange Red 1608(0603) 1.6×0.8(t=0.55) Part No. SML-512PW(A) SML-512MW SML-511WW SML-512WW SML-511DW SML-512DW SML-512CW(A) SML-511UW SML-512UW SML-512VW(A) Absolute Maximum Ratings (Ta=25∞C) Power Part No. Emitting dissipation color PD Dimensions (Unit:mm) 1.6 1.2 SML-512MW SML-511WW SML-512WW SML-511DW SML-512DW SML-512CW(A) SML-511UW SML-512UW SML-512VW(A) SML-512PW(A) Green (Yellowish Green) 65 62 75 62 25 30 25 30 25 30 25 100 60 100 60 2 1 2 1 5 4 5 4 5 4 5 -30 to +85 -30 to +85 -40 to +100 -30 to +85 -40 to +100 -30 to +85 -40 to +100 -40 to +85 -40 to +85 -40 to +100 -40 to +85 -40 to +100 -40 to +85 -40 to +100 1.0 Cathode mark 0.18 Terminal 0° 30° 30° LED Die 0.55 Yellow Orange 75 62 100* 2 60*1 *2 100 Red Green (Yellowish Green) 75 65 1:Duty 1/5, pulse width 2:Duty 1/10, 1kHz 1ms. Tolerance: ± 0.1 Electrical Optical Characteristics (Ta=25∞C) Forward voltage VF Typ. (V) 2.1 IF (mA) Directivity (Typ.) Brightness IV Min. ( mcd) Angular Displacement (deg) X Y Part No. Resin Color Reverse current IR Max. (µA) 100 100 10 100 VR (V) 5 4 5 4 5 4 5 Light wavelength Peak Half-wave λp ∆λ Typ. (nm) 570 590 Typ. (nm) 18 15 IF (mA) 14 22 36 14 611 16 20 36 71 14 22 Typ. IF (mcd) (mA) 40 63 40 100 112 40 63 56 14 20 X’ 0.8 (mW) Peak Forward Reverse Operating Storage forward current voltage temperature temperature current IF VR Topr Tstg IFP (mA) (V) (°C) (°C) (mA) 60° 60° SML-512MW SML-511WW SML-512WW SML-511DW SML-512DW SML-512CW(A) SML-511UW SML-512UW SML-512VW(A) SML-512PW(A) 90° 100 50 0 50 90° 100 RELATIVE LUMINOUS INTENSITY (%) Milky White 2.0 20 10 100 10 Angular Displacement (deg) 0° Y’ 630 639 563 18 16 15 30° 30° 35.5 5.6 60° 60° 2.1 100 90° 100 50 0 50 90° 100 RELATIVE LUMINOUS INTENSITY (%) Recommended Pad Layout Packaging Specifications (Unit : mm) Tape Specifications : T86 Reel Specifications 0.8 Feeding direction 0.8 0.85 0.8 4±0.1 2±0.05 1.75±0.1 φ 13 φ 1.5 +0.1 0 3.5±0.05 1.9 (Unit:mm) The recommended thickness of the screen mask for soldering is between 100 and 150µm. The hole size of the screen mask should be same as the recommended land pattern or smaller. 0 to 0.5 5.5 8 1 0.73 Label Position 11.4±1 Tolerance: ± 0.2 Tolerance: ± 0.2 Rev.C φ 180 −0 3 φ 60 +1 0 Electrical Characteristic Curves Forward Current - Forward Voltage 100.0 Ta=25°C Relative Luminous Intensity - Case Temperature RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) ------- SML-512MW 1.6 1.4 ---- 1444443 10.0 1.0 SML-511WW SML-512WW SML-511DW SML-512DW SML-512CW(A) SML-511UW SML-512UW SML-512VW(A) SML-512PW(A) 1.2 1.0 0.8 0.6 0.4 -30 -20 -10 0 10 20 30 40 50 60 70 80 SML-512MW SML-511WW SML-512WW SML-511DW SML-512DW SML-512CW(A) SML-511UW SML-512UW SML-512VW(A) SML-512PW(A) 144443 0.1 1.0 1.5 2.0 2.5 3.0 FORWARD VOLTAGE : VF (V) CASE TEMPERATURE : Tc (°C) Relative Luminous Intensity - Forward Current 10.0 Ta=25°C Ratio of Maximum Tolerable Peak Current - Pulse Duration RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT ---- RELATIVE LUMINOUS INTENSITY 1.0 0.1 SML-512MW SML-511WW SML-512WW SML-511DW SML-512DW SML-512CW(A) SML-511UW SML-512UW SML-512VW(A) SML-512PW(A) 10 ------500Hz 5kHz 2kHz 1kHz 200Hz 100Hz 10kHz 1444443 SML-512MW 143 4 3.3 SML-512WW SML-512DW SML-512CW(A) SML-512UW SML-512VW(A) 0.01 1 10 PEAK FORWARD CURRENT : IF (mA) 100 1 10 100 1000 10000 PULSE DURATION : Tw (µs) Ratio of Maximum Tolerable Peak Current - Pulse Duration RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT 10 Derating MAXIMUM FORWARD CURRENT : IF Max. (mA) ------1kHz 500Hz 200Hz 5kHz 2kHz 100Hz 50kHz 20kHz 10kHz 500Hz 200Hz 100Hz 20kHz 10kHz SML-512PW(A) SML-511WW SML-511DW SML-511UW 30 ------- SML-512PW(A) 143 143 4 5kHz 2kHz 1kHz 20 SML-512WW SML-512DW SML-512CW(A) SML-512UW SML-512VW(A) SML-512MW SML-511WW SML-511DW SML-511UW 2.4 ------10 1443 1 1 10 100 1000 10000 0 PULSE DURATION : Tw (µs) 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (°C) Rev.C Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1