SMLR12BTT87P

Data Sheet SML-R1 Series PICOLEDTM-side 16115 0604） （ 1.6×1.15mm t=0.2mm） （ Features ・ Ultra compact, thin side-view type LED ・ Ultra low height package t=0.2mm Color Type V M U P D B Y WB Specifications Part No. ■ SML-R12V8T ■ SML-R12U8T ■ SML-R12D8T ■ SML-R12Y8T ■ SML-R12M8T ■ SML-R12P8T ■ SMLR13BDT ■ SMLR13WBDW Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min.*2 Typ. Max.*2 Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Red Orange Yellow Yellowish Green Green InGaN on SiC Blue White 66 78 3.0 5 625 615 54 20 100＊1 5 -40 to +85 -40 to +100 2.2 20 10 5 602 587 569 557 465 630 620 605 590 572 560 470 635 625 608 593 575 563 475 5 20 16 25 40 25 10 2.5 14 56 40 63 100 63 25 6.3 36 110 5 20 AIGaInP on GaAs (x, y) (0.30, 0.30) ＊1:Duty1/10, 1kHz /＊2:Reference Dimensions 1.6 0.2+0.05 -0.02 1.2 Recommended Solder Pattern Viewing Angle 1.2 X-Y SML-R12□8T Series SCANNING ANGLE (deg) 30° 40° 50° 60° 70° 80° 90° 100 50 0 50 20° 10° 0° 10° 20° Directivity (deg) 30° 40° 50° 60° 70° 80° 90° 100 X’ - Y’ SCANNING ANGLE (deg) Directivity (deg) 20° 10° 0° 10° 20° 40° 50° 60° 70° 80° 90° 100 30° 30° 40° 50° 60° 70° 80° 0.68 1.15 0.9 3.3 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) 50 0 50 90° 100 X-Y SCANNING ANGLE (deg) Directivity (deg) 30° 40° 50° 60° 20° 10° 0° 10° 20° 30° SMLR13BDT / SMLR13WBDW X’ - Y’ SCANNING ANGLE (deg) Directivity (deg) 20° 10° 0° 10° 20° 30° 30° 40° 50° 60° 70° 80° 40° 50° 60° 70° 80° 50 0 50 90° 100 60° 70° 80° 90° 100 50° 40° 70° Cathode mark 1.1 80° Tolerance : ±0.1 （unit : mm） （unit : mm） 90° 100 50 0 50 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) ＊PICOLEDTM is ROHM's pending trademark. © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com 1/3 2010.05 - Rev.A SML-R1 Series Electrical Characteristics Curves   Forward Current-Forward Voltage 100 Ta=25°C FORWARD CURRENT：IF (mA) 10 FORWARD CURRENT：IF (mA) ■ ■ ■ ■ ■ ■ ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 100 Ta=25°C ■ ■ SMLR13BDT ■ SMLR13WBDW 10 1 1.0 1.5 2.0 2.5 3.0 1 2.0 2.5 3.0 3.5 4.0 FORWARD VOLTAGE：VF (V) FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=20mA ■ RELATIVE LUMINOUS INTENSITY (a.u.) ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=5mA ■ ■ SMLR13BDT ■ SMLR13WBDW -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current 1.2 Ta=25°C RELATIVE LUMINOUS INTENSITY (a.u.) 1.0 0.8 0.6 0.4 0.2 0 RELATIVE LUMINOUS INTENSITY (a.u.) ■ ■ ■ ■ ■ ■ ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 4.0 Ta=25°C ■ ■ SMLR13BDT ■ SMLR13WBDW 3.0 2.0 1.0 0 5 10 15 20 0 0 5 10 15 20 PEAK FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) Derating ■ MAXIMUM FORWARD CURRENT： (mA) 30 MAXIMUM FORWARD CURRENT：IF (mA) 20 ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T ■ 30 25 20 15 10 5 0 -40 ■ SMLR13BDT ■ SMLR13WBDW 10 0 -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) AMBIENT TEMPERATURE：Ta (°C) © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com 2/3 2010.05 - Rev.A SML-R1 Series Rank Reference of Brightness Red (V, U) Package size(mm) Side View 16115 Chip LEDs Luminous Intensity (mcd) Height(mm) G H J K L 6.3 to 10 M 10 to 16 N 16 to 25 P Q R S 100 to 160 T 160 to 250 U 250 to 400 V （Ta=25˚C, IF＝20mA） W X 630 to 1000 1000 to 1600 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 0.2 25 to 40 40 to 63 63 to 100 SML-R12V8T SML-R12U8T 400 to 630 Orange (D) Package size(mm) Side View 16115 Chip LEDs Luminous Intensity (mcd) Height(mm) G 1.0 to 1.6 H 1.6 to 2.5 J 2.5 to 4.0 K 4.0 to 6.3 L 6.3 to 10 M 10 to 16 N 16 to 25 P 25 to 40 Q 40 to 63 R 63 to 100 S 100 to 160 T 160 to 250 U 250 to 400 V （Ta=25˚C, IF＝20mA） W X 630 to 1000 1000 to 1600 400 to 630 0.2 SML-R12D8T Yellow (Y) Package size(mm) Side View 16115 Chip LEDs Luminous Intensity (mcd) Height(mm) G H J K L 6.3 to 10 M 10 to 16 N 16 to 25 P 25 to 40 Q 40 to 63 R 63 to 100 S 100 to 160 T 160 to 250 U 250 to 400 V （Ta=25˚C, IF＝20mA） W X 630 to 1000 1000 to 1600 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 400 to 630 0.2 SML-R12Y8T Green (M, P) Package size(mm) Side View Chip LEDs 16115 Luminous Intensity (mcd) Height(mm) F G H J K L 6.3 to 10 M 10 to 16 N P Q 40 to 63 R 63 to 100 S 100 to 160 T 160 to 250 U 250 to 400 V （Ta=25˚C, IF＝20mA） W X 630 to 1000 1000 to 1800 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 0.2 16 to 25 25 to 40 SML-R12M8T 400 to 630 SML-R12P8T Blue (B) Package size(mm) Side View Chip LEDs 16115 Luminous Intensity (mcd) Height(mm) G 0.9 to 1.4 H 1.4 to 2.2 J 2.2 to 3.6 K 3.6 to 5.6 L 5.6 to 9.0 M 9 to 14 N 14 to 22 P 22 to 36 Q 36 to 56 R 56 to 90 S 90 to 140 T 140 to 220 U 220 to 360 （Ta=25˚C, IF＝5mA） V W 360 to 560 560 to 900 0.2 SMLR13BDT White (WB) Luminous Package Intensity size (mcd) (mm) Height(mm) P 25 to 36 Q 36 to 56 R 56 to 90 S 90 to 140 T 140 to 220 U 220 to 360 （Ta=25˚C, IF＝5mA） V W 360 to 560 560 to 900 Side View Chip LEDs 1810 0.35 SMLR13WBDW Part No. Construction ∗ “−” will be taken out for emitting color W/B/E series. Special Code will be applied for Emitting color W/B/E series. Chromaticity rank(for white LED) SML Series name R12M Package name Chip Type Emitting Color T Resin Color T86 Taping Specifications P Rank sign (Brightness Rank)∗ 2 3 High Brightness Type Ultra High Brightness Type V Red:630nm U Red:620nm D Orange:605nm Y Yellow:587(590)nm M Yellowish-Green:572nm B Blue:470nm WB White P Green:560nm T Transparent Colorless T86 Cathode at sprocket hole side T87 Reverse of T86 1 For white LED, cathode at sprocket hole side W MilkyWhite ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com 3/3 2010.05 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A