UMG6N

EMG6 / UMG6N / FMG6A Transistors General purpose (dual digital transistors) EMG6 / UMG6N / FMG6A Features 1) Two DTC114T chips in a EMT or UMT or SMT package. External dimensions (Unit : mm) EMG6 (1) (2) (3) (5) 0.13 EMG6 / UMG6N (3) (2) (1) FMG6 (3) (4) (5) R1 DTr2 (4) R1 DTr1 (5) R1 R1 DTr2 (2) DTr1 (1) ROHM : EMT5 Each lead has same dimensions R1=47kΩ R1=47kΩ (4) (3) 0.65 0.65 UMG6N 0.2 1.3 0.8 1.1 2.9 0.5 (5) Equivalent circuit 1.2 1.6 0.5 0.5 1.0 1.6 0.22 (4) Absolute maximum ratings (Ta=25°C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Storage temperature EMG6 / UMG6N FMG6A 1.25 Symbol VCBO VCEO VEBO IC Pc Tj Tstg Limits 50 50 5 100 150(TOTAL) 300(TOTAL) 150 −55 to +150 Unit 0.15 2.1 0.7 0.9 V V V mA mW ROHM : UMT5 EIAJ : SC-88A 0.1Min. 0~0.1 Junction temperature °C °C FMG6A 0.95 0.95 1.9 (2) (1) Each lead has same dimensions Package, marking, and packaging specifications Type Package Marking Code Basic ordering unit (pieces) 0.3 EMG6 EMT5 G6 T2R 8000 UMG6N UMT5 G6 TR 3000 FMG6A SMT5 G6 T148 3000 ROHM : SMT5 EIAJ : SC-74A 0.15 (1) 1.6 2.8 0.3Min. 0~0.1 Each lead has same dimensions (5) (4) (3) Rev.A 2.0 (2) 1/2 EMG6 / UMG6N / FMG6A Transistors Electrical characteristics (Ta=25°C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Input resistance ∗Transition frequency of the device. Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT R1 Min. 50 50 5 − − − 100 − 32.9 Typ. − − − − − − 250 250 47 Max. − − − 0.5 0.5 0.3 600 − 61.1 Unit V V V µA µA V − MHz kΩ IC=50µA IC=1mA IE=50µA VCB=50V VEB=4V Conditions IC/IB=10mA/1mA VCE/IC=5V/1mA VCE=10V, IE= −5mA, f=100MHz ∗ − Electrical characteristics curves VCE=5V COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1k 500 DC CURRENT GAIN : hFE 1 500m 200m 100m 50m 20m 10m 5m 2m 1m 100µ 200µ 500µ 1m 2m lC/lB=10 200 100 50 20 10 5 2 1 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m Ta=100°C 25°C −40°C Ta=100°C 25°C −40°C 5m 10m 20m 50m 100m COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.1 DC current gain vs. collector current Fig.2 Collector-emitter saturation voltage vs. collector current Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1