www.jscj-elec.com
AD-DTA124E series
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD.
AD-DTA124E Series Digital Transistor (Built-In Resistors)
AD-DTA124EM/DTA124EE/DTA124EUA/DTA124EKA /DTA124ECA/DTA124ESA
Digital transistor (PNP)
FEATURES
⚫
Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors
(see equivalent circuit)
⚫
The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They
also have the advantage of almost completely eliminating parasitic effects.
⚫
Only the on/off conditions need to be set for operation, making device design easier
⚫
AEC-Q101 qualified
PIN CONNECTIONS AND MARKING
AD-DTA124EM
AD-DTA124EE
MARKING: 15
MARKING: 15
AD-DTA124EUA
AD-DTA124EKA
MARKING: 15
MARKING: 15
AD-DTA124ECA
AD-DTA124ESA
MARKING:
A124
E XXX 1)
MARKING: 15
1)XXX = Date code
Version 1.0
1 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
EQUIVALENT CIRCUIT
MAXIMUM RATINGS (Tj = 25°C unless otherwise specified)
Parameter
Symbol
Value
M
E
UA
CA
Unit
KA
SA
Supply voltage
Vcc
-50
V
Input voltage
VIN
-40 ~ 10
V
Output current
IO
-30
mA
Peak collector current
ICM
1)
-100
mA
Maximum power dissipation
PD
1)
Operating junction and storage temperature range
1)
100
150
Tj, Tstg
200
200
200
300
mW
-55 ~ 150
°C
ELECTRICAL CHARACTERISTICS (Tj = 25°C unless otherwise specified)
Parameter
Symbol
Test condition
Min
Typ
Max
Unit
VI(off)
VCC = -5V, IO = -100µA
-0.5
-
-
VI(on)
VO = -0.3V, IO = -5mA
-
-
-3
VO(on)
IO/II = -10mA/-0.5mA
-
-
-0.3
V
VI = -5V
-
-
-0.36
mA
IO(off)
VCC = -50V, VI = 0V
-
-
-0.5
µA
DC current gain
GI
VO = -5V, IO = -5mA
56
-
-
-
Input resistance
R1
15.4
22
28.6
kΩ
Resistance ratio
R2 /R1
0.8
1
1.2
-
250
-
Input voltage
Output voltage
Input current
Output current
Transition frequency
II
fT
VO = -10V, IO = -5mA, f = 100MHz
V
MHz
1) Maximum allowed temperature Tj = 25°C.
Version 1.0
2 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
TYPICAL CHARACTERISTICS
Version 1.0
3 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-723 PACKAGE OUTLINE DIMENSIONS
SOT-723 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
4 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-723 TAPE AND REEL
Version 1.0
5 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-523 PACKAGE OUTLINE DIMENSIONS
SOT-523 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
6 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-523 TAPE AND REEL
Version 1.0
7 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-323 PACKAGE OUTLINE DIMENSIONS
SOT-323 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
8 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-323 TAPE AND REEL
Version 1.0
9 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-23-3L PACKAGE OUTLINE DIMENSIONS
SOT-23-3L SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
10 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-23-3L TAPE AND REEL
Version 1.0
11 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-23 PACKAGE OUTLINE DIMENSIONS
SOT-23 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
12 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
SOT-23 TAPE AND REEL
Version 1.0
13 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
TO-92S PACKAGE OUTLINE DIMENSIONS
TO-92S SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
14 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
TO-92S PACKAGE TAPING DIMENSION
Version 1.0
15 / 16
2021-07-01
www.jscj-elec.com
AD-DTA124E series
PUBLISHED BY
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD.
13th Floor, C Block, Tengfei Building, Yan Chuang Yuan, Nanjing Jiangbei New Area, China
LEGAL DISCLAIMER
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples, hints or typical values stated herein and/or any information regarding the application of
the device, JSCJ hereby disclaims any and all warranties and liabilities of any kind, including without limitation,
warranties of non-infringement of intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in
this document and any applicable legal requirements, norms and standards concerning customer’s products and any
use of the product of JSCJ in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
INFORMATION
For further information on technology, delivery terms and conditions as well as prices, please contact your nearest
JSCJ office (www.jscj-elec.com).
WARNINGS
Due to technical requirements, products may contain dangerous substances. For information on the types in question,
please contact your nearest JSCJ office.
Except as otherwise explicitly approved by JSCJ in a written document signed by authorized representatives of JSCJ,
JSCJ’s products may not be used in any applications where a failure of the product or any consequences of the use
thereof can reasonably be expected to result in personal injury.
Version 1.0
16 / 16
2021-07-01
很抱歉,暂时无法提供与“AD-DTA124EM”相匹配的价格&库存,您可以联系我们找货
免费人工找货