RD2AV

SANKEN ELECTRIC CO., LTD. RD2A 1. Scope The present specifications shall apply to an RD2A. 2. Outline Silicon Diode Structure Resin Molded Applications High Frequency Rectification ns Type N ot R ec o m m en de d fo rN ew D es ig 3. Flammability UL94V-0(Equivalent) ‘041117 SSA-04577 1／7 61426-01 SANKEN ELECTRIC CO., LTD. RD2A 4. Absolute maximum ratings Item Symbol Unit Rating Conditions 1 Transient Peak Reverse Voltage VRSM V 600 2 Peak Reverse Voltage VRM V 600 3 Average Forward Current IF(AV) A 1.2 4 Peak Surge Forward Current IFSM A 30 5 I2t Limiting Value I2t A2s 4.5 6 Junction Temperature Tj ℃ -40～+150 7 Storage Temperature Tstg ℃ -40～+150 Symbol Unit V 1msec≦t≦10msec es ig D 2 Reverse Leakage Current IR 3 Reverse Leakage Current Under High Temperature uA IF=1.2A 50 max. VR=VRM 100 max. trr1 ns 50 max. trr2 ns 35 max. Rth(j-l) ℃/W 12 max. de uA VR=VRM, Tj=150℃ IF=IRP=100mA 90% Recovery point, Tj=25℃ IF=100mA，IRP=200mA 75% Recovery point, Tj=25℃ Between Junction and Lead N ot R ec o Thermal Resistance Conditions 1.55 max. H･IR en m m Reverse Recovery Time rN VF d Forward Voltage Drop 5 Half sinewave, one shot Value fo Item 1 4 10msec. ew 5. Electrical characteristics No. Refer to Derating of 7 ns No. ‘041117 SSA-04577 2／7 61426-01 SANKEN ELECTRIC CO., LTD. RD2A 6. Characteristics IF(AV) － PF 3 Tj=150℃ t T Forward Power Dissipation (W) t/T=1/6 2 ns t/T=1/3,sinewave t/T=1/2 es ig 1 ew D DC 0 0.2 0.4 0.6 0.8 1.0 1.2 rN 0.0 fo Average Forward Current (A) 0.10 en Tj=150℃ m T m t 0.08 ec o 0.06 1-t/T=5/6 R 0.04 1-t/T=2/3 ot Reverse Power Dissipation (W) de d VR － P R N 0.02 1-t/T=1/2 sinewave 0.00 0 100 200 300 400 500 600 Reverse Voltage (V) ‘041117 SSA-04577 3／7 61426-01 SANKEN ELECTRIC CO., LTD. 7. RD2A Derating Tl － IF(AV) VR=600(V) 1.2 t/T=1/6 1.0 DC Average Forward Current (A) t/T=1/3 0.8 t/T=1/2 ns 0.6 es ig sinewave 0.4 Tj=150℃ D 0.2 t ew T 0.0 110 120 130 140 150 rN 100 de d fo Lead Temperature (℃) Ta － IF(AV) m en 1.2 m P.C.B. Mounted (10mm×10mm Land) ec o 0.8 t/T=1/2 t/T=1/6 R 0.6 t/T=1/3 ot Average Forward Current (A) 1.0 DC VR=600(V) sinewave N 0.4 Tj=150℃ 0.2 t T 0.0 0 50 100 150 Ambient Temperature (℃) ‘041117 SSA-04577 4／7 61426-01 SANKEN ELECTRIC CO., LTD. 8. RD2A Package information 8-１ Package type, physical dimensions and material ※2 es ig The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.3mm(max.) The burr may exit up to 2mm from the body of lead ns ※1 φ4.0±0.2 ※1 ※2 ※3 ※3 φ0.98±0.05 62.5±0.7 7.2±0.2 8-２ Appearance The body shall be clean and shall not bear any stain, rust or flaw. ew 8-３ Marking D Dimensions in ㎜ rN ① Type number RD2A ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ･： Top of the month ･･： Middle of month ･･･： End of month ③ ② ③ R ec o m m ② ① en ① de d fo カソード表示 Cathode Band N ot 9. Internal structure diagram ① ② ‘041117 ③ No. Name of part Materials ① Plastic body Epoxy Resin ② Chip Silicon ③ Leads Solder Dipped Silver plated copper wire SSA-04577 5／7 61426-01 SANKEN ELECTRIC CO., LTD. RD2A 10. Reliability No. Item Rating Conditions 1 Thermal Fatigue Test 5000 cycles ⊿Tj=100℃ 2 High Temperature Reverse Bias Test 1000 hours 3 Humidity Reverse Bias Test 500 hours 4 High Temperature Storage Test 1000 hours 5 Moisture Resistance Test 1000 hours 6 Thermal Shock Test 100 cycle Ice-water(5min.) ~ R.T.(20sec.) ~ Boiling-water(5min.) 7 Temperature Cycle Test 100 cycle -40℃(30min.) ~ +150℃(30min.) 8 Pressure Cooker Test 96 hours 2.03×105Pa, 100%R.H., Unsaturated equipment Ta=150℃, Ta=85℃, 3.5 sec. Solderability Test 95% 11 Lead Bend Test 2 cycles 12 Lead Pull Test 13 Lead Twist Test 14 Drop Test es ig D ew 380±5℃, Using soldering iron de d 245±5℃, 5±0.5sec., Using rosin flux Apply EIAJ ED-4701 A-111 m m en 10 sec. 2 times 10 times Naturally drop from 1m height on maple plate ec o Acceptance Criteria (1)Item No.1~9 85%R.H. 260±5℃, Dipping up to 1.5mm form case fo 10 VR=VRM×0.8(D.C.) ns Ta=85℃, rN Resistance to Soldering Heat Test R.H.=85%, Ta=150℃ 10 sec. 9 VR=VRM (Half sine wave) The product shall meet the electrical specifications in paragraph 5 after being exposed to normal temperature for less than 24 hours in 2 hours or more N ot R (2)Item No.10 The product shall meet the rating. (3)Item No.11~14 There shall be no trouble in testing and the electrical characteristics in paragraph 5 shall be met. ‘041117 SSA-04577 6／7 61426-01 SANKEN ELECTRIC CO., LTD. RD2A 11. Cautions and warnings Application and operation examples described in this document are quoted for the sole purpose of reference for the use of the products herein and Sanken can assume no responsibility for any infringement of industrial property rights, intellectual property rights or any other rights of Sanken or any third party which may result from its use.  Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against any possible injury, death, fires or damages to the society due to device failure or malfunction.  Sanken products listed in this document are designed and intended for the use as components in general purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Please return to us this document with your signature(s) or seal(s) prior to the use of the products herein. When considering the use of Sanken products in the applications where higher reliability is required (transportation equipment and its control systems, traffic signal control systems or equipment, fire/crime alarm systems, various safety devices, etc.), please contact your nearest Sanken sales representative to discuss, and then return to us this document with your signature(s) or seal(s) prior to the use of the products herein. The use of Sanken products without the written consent of Sanken in the applications where extremely high reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.) is strictly prohibited.  In the case that you use our semiconductor devices or design your products by using our semiconductor devices, the reliability largely depends on the degree of derating to be made to the rated values. Derating may be interpreted as a case that an operation range is set by derating the load from each rated value or surge voltage or noise is considered for derating in order to assure or improve the reliability. In general, derating factors include electric stresses such as electric voltage, electric current, electric power etc., environmental stresses such as ambient temperature, humidity etc. and thermal stress caused due to self-heating of semiconductor devices. For these stresses, instantaneous values, maximum values and minimum values must be taken into consideration. In addition, it should be noted that since power devices or IC’s including power devices have large self-heating value, the degree of derating of junction temperature (Tj) affects the reliability significantly.  When using the products specified herein by either (i) combining other products or materials therewith or (ii) physically, chemically or otherwise processing or treating the products, please duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility.  Anti radioactive ray design is not considered for the products listed herein.  Sanken assumes no responsibility for any troubles, such as dropping products caused during transportation out of Sanken’s distribution network. N ot R ec o m m en de d fo rN ew D es ig ns  ‘041117 SSA-04577 7／7 61426-01