RH1CV

SANKEN ELECTRIC CO., LTD. RH1C １ Scope The present specifications shall apply to a RH1C. ２ Outline Type Silicon Diode Structure Resin Molded Applications Flammability:UL94-V0(Equivalent) High Frequency Rectification, etc. Unit Rating 1 Transient Peak Reverse Voltage VRSM V 1000 2 Peak Reverse Voltage VRM V 1000 3 Average Forward Current IF (AV) A 4 Peak Surge Forward Current IFSM A 5 I2t Limiting Value I2 t A2s 6 Junction Temperature Tj 7 Storage Temperature Conditions es ig Symbol D Item ew No. ns ３ Absolute maximum ratings rN 0.6 6.125 -40 to +150 -40 to +150 d °C de fo 35 °C 10ms. Half sine wave, one shot 1 ms ≤ t ≤ 10 ms en Tstg Refer to derating curve in Section 6 Item m No. m ４ Electrical characteristics (Ta=25°C ，unless otherwise specified) ymbol Unit Value Conditions Forward Voltage Drop VF V 1.3 max. IF=0.6A 2 Reverse Leakage Current IR µA 5 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H･IR µA 70 max. Trr-1 µs 4.0 max. Trr-2 µs 1.3 max. N ot R ec o 1 4 5 Reverse Recovery Time Thermal Resistance 130828 Rth (j-l) °C /W 15 max. VR=VRM, Ta=100°C IF=IRP=10mA 90% Recovery point, Tj=25°C IF=100mA, IR=200mA 75% Recovery point ,Tj=25°C Between Junction and Lead 1／3 61426-01 SANKEN ELECTRIC CO., LTD. RH1C ew D es ig ns ５ VF test and test circuit fo de d 100 en 80 m 60 R 0 ec o 20 m 40 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (°C) N ot Percentage to rated forward current (%) rN ６ Derating Derating to the ambient temperature. Power loss generated by voltage is not taken into consideration. 130828 2／3 61426-01 SANKEN ELECTRIC CO., LTD. RH1C ７ Package information ７-１ Package type, physical dimensions and material ※3 ±0.05 φ4.0 ±0.2 62.5 ±0.7 7.2 ±0.2 ※2 φ0.78 ※1 Dimensions in mm D ew ７-２ Appearance The body shall be clean and shall not bear any stain, rust or flaw. es ig ns *1 The allowance position of Body against the center of whole lead wire is 0.5mm (max.) *2 The centric allowance of lead wire against center of physical body is 0.3mm (max.) *3 The burr may exit up to 2mm from the body of lead fo rN 7-3 Marking (2) (3) The Type number and Lot number are to be marked in yellow. The marking on the case of a part, which is printed in two positions, should be legible in either of the two at least N ot R ec o m (1) m en de d (1)Polarity indication (Cathode Band) (2) Marking Type number RH1C (3) Lot number 1 First digit : Last digit of year Second digit : Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. Lot number 2 (ten days) ･ Top of the month ･･ Middle of month ･･･ End of month 130828 3／3 61426-01