RS1BV

SANKEN ELECTRIC CO., LTD. RS1B １ Scope The present specifications shall apply to an RS1B. ２ Outline Silicon Diode Structure Resin Molded Applications High Frequency Rectification ns Type es ig ３ Flammability UL94V-0(Equivalent) Unit 1 Transient Peak Reverse Voltage VRSM V 2 Peak Reverse Voltage VRM V 3 Average Forward Current IF(AV) 4 Peak Surge Forward Current IFSM 5 I2t Limiting Value 6 Junction Temperature 7 Storage Temperature Conditions 850 800 Refer to derating curve in Section 7 A 30 10ms. Half sine wave, one shot A2s 4.5 1ms≦t≦10ms Tj °C -40 to +150 Tstg °C -40 to +150 fo 0.7 A d m en I2 t ec o m Rating ew Symbol rN Item de No. D ４ Absolute maximum ratings Forward Voltage Drop N 1 Item ot No. R ５ Electrical characteristics (Ta=25℃ ，unless otherwise specified) 2 Reverse Leakage Current 3 Reverse Leakage Current Under High Temperature 4 5 050927 Symbol Unit Value VF V 2.5 max. IF=0.8A IR µA 10 max. VR=VRM H･IR mA 2.0 max. VR=VRM, Tj=150°C Trr1 µs 1.5 max. IF=IRP=10mA 90% Recovery point, Tj=25°C Trr2 µs 0.6 max. IF=10mA, IRP=20mA 75% Recovery point, Tj=25°C Rth(j-l) °C/W 15 max. Between Junction and Lead Reverse Recovery Time Thermal Resistance Conditions 1／4 61426-01 SANKEN ELECTRIC CO., LTD. RS1B ６ Characteristics IF(AV) － PF 2.5 Tj=150°C Forward Power Dissipation, PF (W) 2.0 t T t/T=1/6 1.5 ns t/T=1/3,sinewave DC ew D 0.5 es ig t/T=1/2 1.0 0.0 0.2 0.4 0.6 0.8 rN 0.0 d fo Average Forward Current, IF(AV) (A) de VR － PR 1.4 en Tj=150°C T ec o m 1.0 m t 1-t/T=5/6 0.8 1-t/T=2/3 R 0.6 1-t/T=1/2 0.4 N ot Reverse Power Dissipation , PR (W) 1.2 sinewave 0.2 0.0 0 200 400 600 800 Reverse Voltage, VR (V) 050927 2／4 61426-01 SANKEN ELECTRIC CO., LTD. RS1B ７ Derating Tl － IF(AV) VR=800(V) 0.8 t/T=1/6 Average Forward Current, IF(AV) (A) DC 0.6 t/T=1/3 t/T=1/2 es ig ns 0.4 sinewave Tj=150°C 0.2 D t 0.0 100 150 rN 50 ew T N ot R ec o m m en de d fo Lead Temperature, Tl (°C) 050927 3／4 61426-01 SANKEN ELECTRIC CO., LTD. RS1B ８ Package information ８-１Package type, physical dimensions and material 62.5 ±0.7 7.2 ±0.2 ※2 Dimensions in mm ew ８-２ Appearance The body shall be clean and shall not bear any stain, rust or flaw. D es ig The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.2mm(max.) The burr may exit up to 2mm from the body of lead ns ※1 φ4.0 *1 *2 *3 φ0.78 ±0.05 ±0.2 ※3 rN ８-３ Marking fo ① Type number RS1B is abbreviated as RS1B ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ･ Top of the month ･･ Middle of month ･･･ End of month de d Cathode Mark m N ot R ec o ③ m ② en ① 050927 4／4 61426-01