RU2C

SANKEN ELECTRIC CO., LTD. RU2C 1. Scope The present specifications shall apply to Sanken silicon diode, RU2C 2. Outline Type Silicon rectifier diode (mesa type) Structure Resin molded Applications Pulse rectification, etc. Flammability : UL94V-0(Equivalent) Symbol Unit Rating Transient Peak Reverse Voltage VRSM V 1000 2 Peak Reverse Voltage VRM V 1000 3 Average Forward Current IF(AV) A 4 Peak Surge Forward Current IFSM A 5 Junction Temperature Tj °C 6 Storage Temperature Tstg °C d fo rN 0.8 20 m 2 Reverse Leakage Current 3 Reverse Leakage Current Under High Temperature -40~+150 Unit Value VF V 1.50 max. IF=1.0A IR μA 10 max. VR=VRM H･IR µA 300 max. VR=VRM, Ta=100°C trr1 ns 400 max. IF=IRP=10mA, 90% Recovery point trr2 ns 180 max. IF=10mA,IRP=20mA, 75% Recovery point Rth(j-l) °C /W 15 max. N Reverse Recovery Time Thermal Resistance 041029 10ms.Half sinewave, one shot -40~+150 ot R ec o Forward Voltage Drop 5 10msec. Symbol m Item 1 4 Refer to 6for Derating de en 4. Electrical characteristics No. ew 1 Conditions es ig Item D No. ns 3. Absolute maximum ratings Conditions Between Junction and Lead 1／3 61426-01 SANKEN ELECTRIC CO., LTD. RU2C ew D es ig ns 5. VF test and test circuit rN 6. Derating de d 1.0 en 0.8 m 0.6 ec o R 0.2 m 0.4 0 0 N ot IF(AV) (A) Average Forward Current IF(AV) (A) fo Derating to the ambient temperature. Power loss generated by voltage is not taken into consideration. 041029 20 40 60 80 100 120 140 160 (°C) Ambient temperature (°C) 2／3 61426-01 SANKEN ELECTRIC CO., LTD. RU2C 7. Package information 7-1 Package type, physical dimensions and material ※3 φ0.78±0.05 62.5±0.7 7.2±0.2 φ4.0±0.2 ※1 ※2 Dimensions in mm 7-3 Marking ① Type number RU2C as abbreviated of RU2C. fo ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ ② d ① ③ de ② rN カソード表示 Cathode Band ① D ew 7-2 Appearance The body shall be clean and shall not bear any stain, rust or flaw. The color of the case will be black. es ig ns *1 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) *2 The centric allowance of lead wire against center of physical body is 0.3mm(max.) *3 The burr may exit up to 2mm from the body of lea m en ③ Lot number 2 (ten days) Ten days (・: First ten days,‥: Second ten days,…: Third ten days) The marking on the case of a part, which is printed in two positions, should be legible in either of the two at least. N ot R ec o m *The color of marking must be red 041029 3／3 61426-01